Electronics
Electronic components, sensors and independent modules for making circuits. Modules Resistors Lighting Capacitors Transistors Diodes Potentiometers Other electronics Sensors Sound Inductors Voltage regulators Oscillators Microcontrollers
2488 results Sort by
- LilyPad Reed Switch Sparkfun #DEV-13343 Discover the durable LilyPad Reed Switch, a versatile tool for e-textiles, encased in black plastic for enhanced wearability. Ideal for projects where physical contact isn't feasible. Purchase supports e-textile tech development.Delivered in 5 to 10 days€ 7,25 Incl. VAT
- LilyPad Arduino USB - ATmega32U4 Board Sparkfun #DEV-12049 Discover the power of e-textile projects with the LilyPad Arduino USB board. Versatile and user-friendly, it features a built-in power supply, on/off switch, and rechargeable LiPo battery. Streamline your designs with this compact, lightweight tool.Delivered in 5 to 10 days€ 34,25 Incl. VAT
- LilyPad LED Green (5pcs) Sparkfun #DEV-14011 Get creative with the LilyPad LED Green (5pcs) pack. Snap apart these interconnected LEDs and sew into clothing for unique light-up designs. Durable, washable, and easy-to-use, they're perfect for e-textile projects.Delivered in 5 to 10 days€ 4,00 Incl. VAT
- LilyPad LED Red (5pcs) Sparkfun #DEV-14013 Get creative with the LilyPad LED Red (5pcs) set. Perfect for e-textile projects, these vibrant, sewable LEDs add a warm red glow to any design. Compact, washable and easy to integrate, they're ideal for crafting interactive clothing or costumes. Support e-textile development with every purchase.Delivered in 5 to 10 days€ 4,25 Incl. VAT
- LilyPad Rainbow LED (6 Colors) Sparkfun #DEV-13903 Sparkfun's LilyPad Rainbow LED strip, perfect for e-textiles & wearable projects, offers 7 detachable, color-labeled LEDs. Ideal for designers, hobbyists & students. Your purchase supports e-textiles education.Delivered in 5 to 10 days€ 7,25 Incl. VAT
- 2.0" 320x240 Color IPS TFT Display with microSD Card Breakout Adafruit #4311 This gorgeous IPS display breakout is the best way to add a small, colorful and bright display to any project, with excellent visibility from any angle. Since the display uses 4-wire SPI to communicate and has its own pixel-addressable frame buffer, it can be used with every kind of microcontroller.Delivered in 10 to 30 days€ 25,40 Incl. VAT
- Gravity: Analog Infrared CO2 Sensor For Arduino (0~5000 ppm) DFRobot #SEN0219 Introduction The concentration of carbon dioxide (0.03% usuallly) is related to daily life. Recently, there’s a study showing that the atmospheric CO2 content has reached 0.0385% (385 ppm) which is the highest value since 2.1 million years.Delivered in 5 to 10 days€ 62,00 Incl. VAT
- CO₂ Humidity and Temperature Sensor - SCD30 Sparkfun #SEN-15112 Discover the Sensirion SCD30, a top-tier NDIR CO₂ sensor with built-in temperature and humidity sensing. Compatible with OpenLog Artemis, it offers automatic detection & logging. Use 'SparkFun SCD30' Arduino library for easy readings.Delivered in 5 to 10 days€ 79,20 Incl. VAT
- GPS Receiver - GP-735 (56 Channel) Sparkfun #GPS-13670 Get the compact and high-performance GP-735 GPS smart antenna receiver from Sparkfun. Ideal for tracking and drone design with its 56-channel GPS module, -162dBm sensitivity, and quick 29-second cold start time.Delivered in 5 to 10 days€ 54,50 Incl. VAT
- SparkFun Qwiic Joystick Sparkfun #COM-15168 Shop the SparkFun Qwiic Joystick, a perfect addition to any human interface project. Featuring a Qwiic connection system, an analog joystick similar to a PS2 controller, and an onboard ATtiny85 microcontroller. No soldering required, ideal for controlling robots, navigating menus or video games.Delivered in 5 to 10 days€ 16,20 Incl. VAT
- WS2811 NeoPixel LED Driver Chip - 10 Pack Adafruit #1378 Make your own smart LEDs with the same chip that is used in our NeoPixel strip and pixels. This tiny SOIC-8 is fairly easy to solder and can drive a single common-anode RGB LED or three single-color...Delivered in 10 to 30 days€ 13,50 Incl. VAT
- Maker Object: Simplifying Object Sensor for Beginner Cytron #MAKER-OBJECT Maker Object is a tiny digital infrared (IR) proximity sensor designed for object/obstacle detection. The IR signal is modulated at 38kHz makes it immuned to the ambient light. The Maker Object has NPN output with internal pull up resistor. Its output is low when object is detected.Delivered in 5 to 30 days€ 19,75 Incl. VAT
- Maker Reflect: Simplifying IR Reflectance Sensor for Beginner Cytron #MAKER-REFLECT Maker Reflect is a tiny reflectance sensor which consists of an infrared (IR) LED that transmits IR light onto a surface and a phototransistor measures how much light is reflected back.Delivered in 5 to 30 days€ 3,60 Incl. VAT
- Pololu Dual MC33926 Motor Driver Shield for Arduino Pololu #2503 This shield makes it easy to control two brushed DC motors with your Arduino or Arduino-compatible board. Its dual MC33926 motor drivers operate from 5 to 28 V and can deliver a continuous 3 A per motor.Delivered in 5 to 14 days€ 48,00 Incl. VAT
- DS3231M MEMS Precise RTC DFRobot #DFR0641 This precise RTC adopts DS3231M chip, which integrates MEMS resonator and temperature compensator. Compared to quartz crystal clock, the real-time clock reduces the risk of mechanical failure. Therefore, it can be used in a highly vibrating environment.Delivered in 5 to 10 days€ 7,80 Incl. VAT
- SparkFun Qwiic Thermocouple Amplifier - MCP9600 (Screw Terminals) Sparkfun #SEN-16295 Get accurate temperature readings with the SparkFun Qwiic Thermocouple Amplifier - MCP9600. Features I2C interface, two sensors, ±1.5°C accuracy, and Qwiic compatibility for easy plug-in. Ideal for various applications, it also offers four temperature alerts and a power-saving burst mode.Delivered in 5 to 10 days€ 33,00 Incl. VAT
- Adafruit Metro M4 Express AirLift (WiFi) - Lite Adafruit #4000 Give your next project a lift with AirLift - our witty name for the ESP32 co-processor that graces this Metro M4. You already know about the Adafruit Metro M4 featuring the Microchip ATSAMD51, with it's 120MHz Cortex M4 with floating point support.Delivered in 10 to 30 days€ 39,80 Incl. VAT
- Smart Materials - Thermochromic Sheet 300 x 150mm with Adhesive Backing Kitronik #2065 Thermochromic Sheets provide a 'hands on' and exciting way to see thermal mapping changes through colour. They are made from Thermocolour Liquid Crystals, in sheet form, that change colour depending on temperature.Delivered in 5 to 30 days€ 19,25 Incl. VAT
- 8.9" 1920x1200 IPS Touch Display DFRobot #DFR0658 Introduction This 8.9”1920x1200 IPS Touch Display is most suitable for Jetson Nano and Raspberry Pi 4B/3B+. It features a small size, plug and play, and 10 touching points, providing a smooth and sensitive touching experience for you.Out of stock€ 185,40 Incl. VAT
- 2.4GHz 6dBi Antenna with IPEX Connector DFRobot #FIT0505 This is an omni-directional antenna with an IPEX connector. Its working frequency is 2.4GHz which meets most requirements of Wi-Fi devices. With 6dBi high gain, it offers robust signal reception and transmission.Delivered in 5 to 10 days€ 5,40 Incl. VAT
- Sonoff T2 Wall switch - T2EU2C - WiFi + RF Itead #T2EU2C-TX Upgrade your smart home experience with the sleek Sonoff T2EU2C WiFi Wall Switch! Enjoy effortless control, energy-saving automation, and seamless integration with your favorite smart home platforms. Make the switch today and transform your living space!Delivered in 14 to 30 days€ 19,35 Incl. VAT
- 64x32 RGB LED Matrix - 3mm pitch Adafruit #2279 Bring a little bit of Times Square into your home with this sweet 64 x 32 square RGB LED matrix panel. These panels are normally used to make video walls, here in New York we see them on the sides of busses and bus stops, to display animations or short video clips.Delivered in 10 to 30 days€ 105,90 Incl. VAT
