Fluid Control
46 results Sort by
- Opencircuit Peristaltic pump 12V Opencircuit This peristaltic pump is a fast and powerful pump with a different operation than the known pumps. Because this pump pushes the liquid through the hose through a peristaltic movement, the pump itself never comes into contact with the liquid.In stock€ 10,15 € 5,10 Incl. VAT
- Opencircuit Luchtpomp 3V - 6V Opencircuit Small air pump with good air displacement at a voltage of 3V to 6V. This air pump has a maximum power of 4W at 6V, but it is recommended to connect it to 3V because of the noise production. The connection has a diameter of 4.3 mm.In stock€ 8,50 € 1,85 Incl. VAT
- DFRobot Gravity: Analog Turbidity Sensor For Arduino DFRobot #SEN0189 The arduino turbidity sensor detects water quality by measuring level of turbidity. It is able to detect suspended particles in water by measuring the light transmittance and scattering rate which...In stock€ 13,75 € 6,90 Incl. VAT
- Adafruit Brass Liquid Solenoid Valve - 12V - 1/2 Inch G / BSP Thread Adafruit #996 Efficient liquid valve for applications like robotic gardening and aquariums. Operates via 12VDC with 1/2" BSP/G outlets. Made of brass with an NBR gasket, it opens on electrical activation, allowing seamless water flow.Delivered in 10 to 30 days€ 34,50 Incl. VAT
- DFRobot Gravity: Analog pH Sensor/Meter Kit V2 DFRobot #SEN0161-V2 DFRobot Gravity: Analog pH meter V2 is specifically designed to measure the pH of the solution and reflect the acidity or alkalinity. It is commonly used in various applications such as aquaponics, aquaculture, and environmental water testing.Delivered in 5 to 10 days€ 54,50 Incl. VAT
- DFRobot Gravity: Analog Electrical Conductivity Sensor /Meter V2 (K=1) DFRobot #DFR0300 DFRobot Gravity: analog electrical conductivity meter V2 is specially used to measure the electrical conductivity of aqueous solution, and then to evaluate the water quality, which is oftenDelivered in 5 to 10 days€ 96,25 Incl. VAT
- DFRobot Gravity: Analog pH Sensor / Meter Pro Kit For Arduino DFRobot #SEN0169 This is a professional Arduino pH Sensor Meter Kit with industrial electrode. It has built-in simple, convenient , practical connection and long life (up to 1 year), which makes it very suitable for...Delivered in 5 to 10 days€ 78,50 Incl. VAT
- DFRobot Gravity: Analog ORP Sensor Meter For Arduino DFRobot #SEN0165 In the ever-increasing need and awareness for health and safety, water has become a focus point for proper disinfection treatment as aftereffects of industrialization can become a danger for contamination of water via direct contact.Delivered in 5 to 10 days€ 122,75 Incl. VAT
- DFRobot Gravity: Non-contact Digital Water / Liquid Level Sensor For Arduino DFRobot #SEN0204 This is a non-contact water / liquid level sensor for Arduino. It utilizes advanced signal processing technology by using a powerful chip (XKC-Y25-T12V) with high-speed operation capacity to achieve non-contact liquid level detection.Delivered in 5 to 10 days€ 16,50 Incl. VAT
- Digital Peristaltic Pump with PPM Motor Driver by DFRobot DFRobot #DFR0523 DFRobot's digital peristaltic pump offers precise liquid control with its PPM motor driver and versatile Gravity interface, compatible with Arduino, Raspberry Pi, and micro:bit. Ideal for scientific, gardening, culinary, and medical applications.Delivered in 5 to 10 days€ 33,25 Incl. VAT
- DFRobot Gravity: Analog Dissolved Oxygen Sensor / Meter Kit For Arduino DFRobot #SEN0237-A This is a dissolved oxygen sensor kit, which is compatible with Arduino microcontrollers. This product is used to measure the dissolved oxygen in water, to reflect the water quality.Delivered in 5 to 10 days€ 232,75 Incl. VAT
- DFRobot Gravity: Digital Water Flow Sensor For Arduino - 1/8" DFRobot #SEN0216 The Water Flow sensor measures the rate of a liquid flowing through it. The YF-S401 water flow sensor consists of a plastic valve body, flow rotor and hall effect sensor. It is usually used at the inlet end to detect the amount of flow.Delivered in 5 to 10 days€ 12,25 Incl. VAT
- DFRobot Gravity: Non-contact Liquid Level Switch DFRobot #FIT0212 This non-contact liquid level switch can be triggered when the liquid level falls below the sensor attached to the outside surface of a non-metal container. Unlike traditional liquid level sensors, it does not need to be immersed in liquid.Delivered in 5 to 10 days€ 19,75 Incl. VAT
- DFRobot Non-contact Capacitive Liquid Level Sensor DFRobot #SEN0368 This is a non-contact liquid level sensor with status indicator and adjustable sensitivity. It can be used in liquid detection of non-metallic container or pipe(outer diameter>11mm), suitable for all...Delivered in 5 to 10 days€ 15,25 Incl. VAT
- DFRobot UART Non-contact Optical Turbidity Sensor for Arduino DFRobot #SEN0554 Discover the UART Non-contact Optical Turbidity Sensor for Arduino. Ideal for water quality monitoring, this sensor offers high reliability, quick response time, and easy installation.Delivered in 5 to 10 days€ 13,75 Incl. VAT
- DFRobot Industrial Capacitive Liquid Level Sensor for High-Viscosity Liquids DFRobot #SEN0507 Experience a new level of precision with the innovative capacitive liquid sensor, specially engineered to detect high-viscosity and low-corrosive liquids such as glue, lubricating oil, greasDelivered in 5 to 10 days€ 81,25 Incl. VAT
- DFRobot Replacement Membrane Cap for Gravity Analog Dissolved Oxygen Sensor DFRobot #FIT0575 Ensure precise water monitoring with our replacement membrane cap, crafted for the Gravity Analog Dissolved Oxygen Sensor. Designed for optimal functionality, the transparent, durable membrane ensures accurate readings under frequent use.Delivered in 5 to 10 days€ 20,75 Incl. VAT
- DFRobot 12V Normally Closed Solenoid Valve DFRobot #FIT0498 Effortlessly manage water flow with this 12V solenoid valve, offering easy installation and reliable performance. With high sensitivity and adjustable terminals, it's perfect for automated systems and built to last with a 200,000-cycle lifespan.Delivered in 5 to 10 days€ 10,50 Incl. VAT
- DFRobot Non-contact Capacitive Liquid Level Sensor for Tube OD≤10mm DFRobot #SEN0370 Precision liquid level sensor with real-time status indicator. Compatible with tubes up to 10mm diameter. Ideal for water dispensers, small piping systems, and more. Unaffected by corrosive or alkaline liquids, ensuring durability.Delivered in 5 to 10 days€ 15,25 Incl. VAT
- DFRobot Gravity: Non-contact Capacitive Flexible Liquid Level Sensor DFRobot #SEN0508 This lightweight liquid level sensor offers flexibility, with a temperature-resistant adhesive for secure attachment on surfaces up to 5mm thick. Ideal for integration into water tanks and more, providing digital high/low output via a 3-pin DuPont connector.Delivered in 5 to 10 days€ 13,75 Incl. VAT
- DFRobot Solenoid Valve-DN15 DFRobot #FIT0616 This 12V solenoid valve combines a valve and DC motor with a metal reduction gearbox, offering automated and manual liquid flow control. Features include high torque, low noise, and robust engineering with resistance to electromagnetic interference and pressures up to 1.0Mpa.Delivered in 5 to 10 days€ 34,50 Incl. VAT
- DFRobot Solenoid Valve - DN20 DFRobot #FIT0617 This 12V solenoid valve controls liquid flow with innovative design, offering automated and manual operation. Equipped with colored control wires, it integrates seamlessly with smart systems for efficient management.Delivered in 5 to 10 days€ 34,50 Incl. VAT
- DFRobot Capacitive Tube Liquid Level Sensor (OD=6mm) DFRobot #SEN0509 High sensitivity capacitive sensor tailored for 6mm non-metallic tubes. Offers precise liquid detection with high/low digital outputs, ideal for beverage machines and medical applications.Delivered in 5 to 10 days€ 14,00 Incl. VAT
Customer reviews about Fluid Control
Recently viewed items
