Ordered today, delivered Tuesday
from € 100,-
DIY & Gadgets
from € 100,-
[ 48 ]
[ 84 ]
[ 20 ]
[ 34 ]
[ 293 ]
[ 6 ]
[ 3 ]
[ 94 ]
[ 66 ]
[ 14 ]
[ 18 ]
[ 3 ]
[ 23 ]
[ 105 ]
[ 27 ]
[ 28 ]
[ 7 ]
[ 156 ]
[ 4 ]
[ 4 ]
[ 16 ]
[ 4 ]
NXP iMXRT1062 Cortex-M7
ESP32-C3 WIFI & Bluetooth LE
W600 Arm Cortex M3
Analoog I / O
Stroom per I/O
PC V0 + CRS + Toughened Glass
Number of relays
DIY & Gadgets
Everyone is welcom to join our affilate program.
Place affiliate links and banners on your pages or website.
Direct customers to Opencircuit
Receive up to 10% in commission!
Platforms are a family of microcontrollers, sensors and accessories that work together seamlessly.
BBC micro: bit
Arduino Leonardo - clone
The Arduino Leonardo is a development board based on the ATmega32u4. The board contains 20 digital input / output pins (7 of which can be used as PWM outputs and 12 as analog inputs).
Arduino nano I / O shield V3
This shield makes the Arduino Nano a lot more accessible to use. Because this shield neatly groups all I / O of the Arduino into groups with GND, SIGNAL and VCC.
Arduino pro micro 5V 16MHz - clone
The Arduino pro micro is actually the small version of the Arduino Leonardo, based on the ATmega32u4. Due to its size, the board contains 12 digital input / output pins (5 of which can be used as PWM outputs), 4 (10 bit) ADC inputs, a 16 MHz crystal and a micro USB connection.
Arduino Mega 2560 - clone
Arduino Mega 2560 is the latest version of the development board and the successor to Arduino UNO. This board has the same clock speed as the Arduino Uno, but is a real powerhouse because of the much larger memory and more than doubled number of pins.
Arduino Nano R3 - clone - with headers
The Arduino Nano with soldered headers is a small, complete, breadboard-friendly sign based on the ATmega328. This board uses the same chip as the UNO, but comes in a different package.
Ethernet Shield W5100
This Ethernet Shield ensures that the Arduino can be connected to the internet. This board has a Wiznet W5100 ethernet chip as controller chip. The Wiznet W5100 makes a network accessible with both the TCP and UDP protocol.
Motor Driver Shield L293D
This shield is driven by 2 L293D chips, which are very strong 4-channel drivers. Because of the power of these chips, this shield can control 4 DC motors or 2 stepper / servo motors. This board can control four channels with heat protection and can supply a voltage of 4.5V to 36V DC.
Sensor shield V5
Sensor shield V5, compatible with the Arduino UNO and Mega. This shield provides easier access to the Arduino's I / O pins by properly grouping these pins and adding extra ground and 5V.
Data logger shield
This data logger shield contains an SD card interface and a real time clock (RTC) with battery (CR1220). In addition, there is space available to add a circuit to this sign yourself. This shield is compatible with the Arduino Leonardo, UNO and Mega.
A multifunctional shield compatible with the Arduino UNO and Arduino Leonardo. This shield has 4 numeric displays (powered by 2 x 74HC595), a buzzer, a potentiometer, 3 tactile buttons and some interface connections, including voice recognition, servo motors, temperature and infrared.
Arduino Mega 2560 with CH340 driver
Arduino Mega 2560 is the latest version of the Arduino UNO development board and successor. This card has the same clock speed as the Arduino Uno, but is a real power due to the much larger memory and the number of pins more than doubled. This version conti
NodeMcu v2 Lua ESP-12E WIFI Development Board
The NodeMcu is an open source card with an integrated WIFI ESP-12E module. It is not a weak like the Arduino, with 512 KB of memory and a processor at 40Mhz there is no shortage of sources. This sign is extremely suitable for starting IoT (Internet of Things) applications.
Transparant Arduino UNO frame
This transparent frame for the Arduino UNO not only looks good but also gives good protection for the Arduino. As a result, the fall of a screw or cable on the Arduino will no longer have catastrophic consequences.
Transparant Arduino Mega frame
This transparent frame for the Arduino Mega not only looks good but also gives good protection for the Arduino. As a result, the fall of a screw or cable on the Arduino will no longer have catastrophic consequences.
Arduino Nano terminal block shield DIY
This terminal block shield is for the Arduino Nano. Since the Arduino Nano has the headers on the bottom, it can be a pain to connect everything. This shield, which you have to assemble yourself, prevents that problem by connecting all the I/O of the Arduino with print terminal blocks.
Mini Development Board ATMEGA16/ATMEGA32
Very small but handy development board for the Atmega16 and Atmega32. This board has a clamping system with a handle to clamp the Atmega chip. Furthermore, this board contains headers to connect the 32 I / O, a DC power socket, reset button and connection for the programmer.
Attiny development board micro usb
Small development board for the ATtiny13A, ATtiny25, ATtiny45 and the ATtiny85 with mirco USB connection.
ENC28J60 Ethernet Shield for the Arduino Nano
Ethernet Shield for the Arduino Nano based on the ENC28J60 controller. Handy for a very compact web server.
Screw shield V2 - Arduino Uno
Screw shield V2 for the Arduino Uno. This shield contains screw terminals, which are connected to all I / O of the Arduino. Apart from that, this shield can simply be clicked on or under other shields.
SONOFF BASICR2- WiFi Wireless Smart Switch
Sonoff is an affordable device that provides users with smart home control. It is a WiFi based wireless switch that can connect to a wide range of appliances . Sonoff transmits data to a cloud platform through the WiFi Router, which enables you to remotely control all the connected appliances...
Transparent acrylic base plate for Arduino Uno and breadboard
Acrylic base plate for the Arduino Uno and a 400-point breadboard. This bottom plate protects the bottom of the Arduino Uno, eliminating a cause of short circuit. In addition, it is a very useful platform to set up a prototype because the Arduino ...
3.5 "HDMI LCD shield for the Raspberry PI - Touchscreen
This 3.5 inch TFT display can be used as an interface for the Raspberry PI, but also as a television, terminal, computer or another application where a 3.5 inch screen with a 1920 x 1080 resolution comes in handy.
Arduino Nano R3 without headers - clone
The Arduino Nano is a small, complete, breadboard-friendly board based on the ATmega328. This Nano comes without soldered headers. This sign uses the same chip as the UNO, but is in a different package. This sign does not have a DC power jack, and is ...
433MHz Wireless 4 Buttons Push Cover Remote
This is a 433MHz Wireless 4 Buttons Push Cover Remote which controls the learning code remote control wall switch, plug seat or extention socket. It's suitable for long distance and multiple switch control.
WeMos D1 mini Lithium battery Shield
This shield for the WeMos D1 mini contains the necessary electronics to connect a lithium battery to the WeMos D1 and also to charge the battery. With the USB port on this module, the battery can be charged with a charging current of 500mA or 1A (adjustable with the jumper on the bottom of this shie
WeMos D1 mini Dual base shield
This shield for the WeMos D1 mini contains 2 sockets for the WeMos D1 which are connected to each other. This makes it possible to connect more shields with the WeMos. The illustrated headers are supplied (separately).
WeMos D1 mini DC Power Shield
This shield for the WeMos D1 mini contains a DC connector, which reduces an input voltage from 7V to 24V to 5V. The shield can deliver a maximum of 1A.
WeMos D1 mini Pro 2.0.0 - Wifi Module
The WeMos D1 mini Pro is a small sign based on the ESP-8266EX WiFi controller. The module contains a micro USB port and CP2104 USB to sirial converter, making programming this module almost as easy as an Arduino. However, the power of this module is in ...
WeMos D1 mini Micro SD Shield
This shield for the WeMos D1 mini contains a micro SD card holder so that the WeMos can also log data. The illustrated headers are supplied (separately).
Raspberry Pi T-Cobbler Breakout
With this breakout board in the shape of a 'T' the pins of a RaspBerry Pi or other compatible boards can be connected to a breadboard.
Sonoff SV - Safe Voltage WiFi Draadloze Switch
The Sonoff SV (Safe Voltage) works like the normal Sonoff switch, but works at a lower (safe) voltage (5V to 24V). The jumper is used to connect the input voltage to the relay, but by removing it, AC / mains voltage can also be switched.
NodeMcu ESP-32S Lua ESP-WROOM-32 WIFI Development Board
The NodeMcu ESP-32S is an open-source board with built-in ESP-WROOM-32 WIFI module. This is not a weakling like the Arduino's, with 512kb of memory and a dual-core processor at 240Mhz there is not a shortage of sources.
Adafruit Pro Trinket LiIon/LiPoly Backpack Add-On
If you have a Pro Trinket you probably know it's the perfect little size for a portable project.
USB to TTL Serial Cable - Debug / Console Cable for Raspberry Pi
The cable is easiest way ever to connect to your microcontroller/Raspberry Pi/WiFi router serial console port. Inside the big USB plug is a USB<->Serial conversion chip and at the end of the 36" cable are four wire - red power, black ground, white RX into USB port, and green TX out of the USB port.
FeatherWing OLED - 128x32 OLED Add-on For All Feather Boards
A Feather board without ambition is a Feather board without FeatherWings! This is the FeatherWing OLED: it adds a 128x32 monochrome OLED plus 3 user buttons to any Feather main board.
DIY Proto HAT for Raspberry Pi 2 & 3 - Printsporen
This proto hat for the Raspberry Pi 2 and Raspberry Pi 3 contains different tracks to build your own circuit. The module is supplied with spacers, screws and a female header to place the module on a Raspberry.
Raspberry Pi Aluminum Heatsink set - 3 pcs
This heatsink set for the Raspberry PI 2 and Raspberry PI 3 consists of 2 heatsinks of 8.9 mm x 9.3 mm and 1 heatsink of 14.3 mm x 13.9 mm. This set can be used for better heat dissipation of the Raspberry PI, which increases the lifespan and performance.
WeMos D1 mini Tripler base shield
This shield for the WeMos D1 mini contains 3 sockets for the WeMos D1 which are connected to each other. This makes it possible to connect more shields with the WeMos. The illustrated headers are supplied (separately).
Arduino Uno Rev3
The Arduino Uno is a microcontroller board based on the ATmega328 chip. The Arduino Uno has 14 digital input / output pins (of which 6 can be used as PWM output), 6 analog inputs, a 16 MHz ceramic resonator, a USB connector, a power jack, an ICSP header ...
Arduino starter kit - in English
This Starter Kit from the Arduino makers contains all components to learn the principles of the Aruino in a practical way. In the accompanying manual 15 projects are described, which step by step help to make the Arduino your own.
Audio Adaptor Board for Teensy 3.0 - 3.6 (Rev C)
This audio adaptor lets you easily add high quality 16 bit, 44.1 kHz sample rate (CD quality) audio to your projects with Teensy 3.0, 3.1, 3.2, 3.5 or 3.6. It supports stereo headphone and stereo line-level output, and also stereo line-level input or mono microphone input.
Male headers double 1x40 straight - 2 pcs
A set of 2 male headers. These male headers with 40 pins have a double insulation, making them very useful for soldering modules together. The headers are easy to break by hand or pliers. The distance between the pins is 2.54mm.
NodeMcu ESP32 OLED Module
The NodeMcu ESP-32 with OLED is a sign with an ESP-WROOM-32 WIFI module and a 0.96 ″ OLED display.
Sonoff DR - Sonoff DIN Rail Tray
As you know, most of the Sonoff products are not DIN rail mounted, which makes it difficult to put the Sonoff products into the switchboard.
Sonoff 4CH Pro R3 - RF / WiFi Wireless Smart Switch
This Sonoff 4CH Pro R3 switch contains 4 separate Sonoff (RF) switches with a number of very useful features. In addition to the mains voltage, the Sonoff can now also be connected to direct current (5V to 24V) and can be placed in both locking and interlocking (1 relay switched on at the same time)
Arduino Mega Rev3
The Mega2560 is based on the ATmega2560 chip and has 54 digital input / output pins (15 of which can be used for PWM), 16 analog input pins, 4 UARTs (hardware serial ports), a 16 MHz crystal oscillator, a USB connection , a power jack, an ICSP head
ATmega328 with Arduino Optiboot (Arduino Uno)
This is a ATmega328 IC in DIP package, pre-loaded with the Arduino Optiboot (Uno 16MHz) Bootloader. This will allow you to use Arduino code in your custom embedded project without having to use an actual Arduino board.
Adafruit Feather nRF52 Bluefruit LE
The Adafruit Feather nRF52 Bluefruit is another easy-to-use all-in-one Bluetooth Low Energy board, with a native-Bluetooth chip, the nRF52832! It's our take on an 'all-in-one' Arduino-compatible + Bluetooth Low Energy with built in USB and battery charging.
Assembled Adafruit HUZZAH32 – ESP32 Feather Board
Aww yeah, it's the Feather you have been waiting for, and now with stacking headers! The HUZZAH32 is our ESP32-based Feather, made with the official WROOM32 module.
Scroll:bit 17x7 LED Matrix
Scroll:bit is a little display with a lot of pixels! Its 119 bright white LEDs are perfect for scrolling messages with your micro:bit, or for animations, graphs, and more!Just slot in your micro:bit, then code scroll:bit with the block-based Microsoft MakeCode editor, or with
Ordered today, delivered Tuesday
from € 100,-