Qwiic
SparkFun's Qwiic Connect System uses 4-pin JST SH connectors to quickly interface development boards with sensors, LCDs, relays and more. Qwiic Modules HATs, Shields, en Carrier Boards Qwiic Development Boards Qwiic Kits Qwiic sensors Qwiic compatible Qwiic wiring
146 resultsSort by
- Qwiic Cable - Breadboard Jumper (4-pin) Sparkfun #PRT-14425 This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookup pigtail on the other. This cable makes it easy to connect components with a Qwiic connector to a breadboard or an Arduino-based device’s pins. 10 for € 1,79 ea. 25 for € 1,71 ea. 50 for € 1,63 ea. 100 for € 1,55 ea. 500 for € 1,47 ea. More information In stock Sold per piece€ 1,90 Incl. VATAdd to cart
- SparkFun Qwiic Cable Kit Sparkfun #KIT-15081 The SparkFun Qwiic Connect System is constantly growing in popularity with makers. So to make it even easier to get started, we've assembled this Qwiic Cable Kit for everyone. 10 for € 9,58 ea. 25 for € 9,32 ea. 50 for € 9,05 ea. 100 for € 8,79 ea. 500 for € 8,52 ea. More information In stock Sold per piece€ 9,85 Incl. VATAdd to cart
- Qwiic Cable - 50mm Sparkfun #PRT-14426 This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well.
Each Qwiic Cable's wires have been color coded to red, black, blue and yellow. 10 for € 1,59 ea. 25 for € 1,52 ea. 50 for € 1,44 ea. 100 for € 1,36 ea. 500 for € 1,28 ea. More information In stock Sold per piece€ 1,70 Incl. VATAdd to cart
- SparkFun Cryptographic Co-Processor Breakout - ATECC508A (Qwiic) Sparkfun #DEV-15573 The SparkFun ATECC508A Cryptographic Co-processor Breakout allows you to easily add strong authentication security to your IoT node, edge device, or embedded system. It includes two Qwiic ports for plug and play functionality. 10 for € 4,99 ea. 25 for € 4,84 ea. 50 for € 4,68 ea. 100 for € 4,53 ea. 500 for € 4,38 ea. More information In stock Sold per piece€ 5,15 Incl. VATAdd to cart
- SparkFun Qwiic Joystick Sparkfun #COM-15168 Now, you can easily add an HID/controller to your project! The SparkFun Qwiic Joystick combines the convenience of the Qwiic connection system and an analog joystick that feels reminiscent of the thumbstick from a PlayStation 2 controller and for that reason it's become a favorite of ours. 10 for € 13,40 ea. 25 for € 13,05 ea. 50 for € 12,69 ea. 100 for € 12,34 ea. 500 for € 11,98 ea. More information In stock Sold per piece€ 13,75 Incl. VATAdd to cart
- SparkFun Qwiic Adapter Sparkfun #DEV-14495 The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic-enabled board. This adapter breaks out the I2C pins from the Qwiic connectors to pins that you can easily solder with your favorite I2C-enabled device. 10 for € 1,85 ea. 25 for € 1,77 ea. 50 for € 1,69 ea. 100 for € 1,60 ea. 500 for € 1,53 ea. More information In stock Sold per piece€ 1,95 Incl. VATAdd to cart
- SparkFun Qwiic Thermocouple Amplifier - MCP9600 (Screw Terminals) Sparkfun #SEN-16295 SparkFun Qwiic Thermocouple Amplifier - MCP9600 (Screw Terminals).The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system. 10 for € 16,66 ea. 25 for € 16,22 ea. 50 for € 15,79 ea. 100 for € 15,36 ea. 500 for € 14,94 ea. More information In stock Sold per piece€ 17,10 Incl. VATAdd to cart
- SparkFun Qwiic MicroPressure Sensor Sparkfun #SEN-16476 The SparkFun Qwiic MicroPressure Sensor is a miniature breakout equipped with Honeywell's 25psi piezoresistive silicon pressure sensor. 10 for € 13,47 ea. 25 for € 13,11 ea. 50 for € 12,75 ea. 100 for € 12,39 ea. 500 for € 12,04 ea. More information In stock Sold per piece€ 13,85 Incl. VATAdd to cart
- Adafruit LIS3DH Triple-Axis Accelerometer (+-2g/4g/8g/16g) Adafruit #2809 The LIS3DH is a very popular low power triple-axis accelerometer. It's low-cost, but has just about every 'extra' you'd want in an accelerometer: More information In stock Sold per piece€ 6,40 Incl. VATAdd to cart
- SparkFun Environmental Combo Breakout - CCS811/BME280 (Qwiic) Sparkfun #SEN-14348 The SparkFun CCS811/BME280 Environmental Combo Breakout takes care of all your atmospheric-quality sensing needs with the popular CCS811 and BME280 ICs. 10 for € 41,49 ea. 25 for € 40,47 ea. 50 for € 39,46 ea. 100 for € 38,44 ea. 500 for € 37,42 ea. More information In stock Sold per piece€ 42,55 Incl. VATAdd to cart
- SparkFun Qwiic SHIM for Raspberry Pi Sparkfun #DEV-15794 The SparkFun Qwiic SHIM for Raspberry Pi is a small, easily removable breakout that easily adds a Qwiic connector to your Raspberry Pi. 10 for € 1,50 ea. 25 for € 1,43 ea. 50 for € 1,35 ea. 100 for € 1,28 ea. 500 for € 1,21 ea. More information In stock Sold per piece€ 1,60 Incl. VATAdd to cart
- SparkFun 16x2 SerLCD - RGB Backlight (Qwiic) Sparkfun #LCD-16396 The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 16x2 Black on RGB Liquid Crystal Display into your project. 10 for € 23,72 ea. 25 for € 23,12 ea. 50 for € 22,52 ea. 100 for € 21,93 ea. 500 for € 21,32 ea. More information In stock Sold per piece€ 24,35 Incl. VATAdd to cart
- SparkFun 20x4 SerLCD - RGB Backlight (Qwiic) Sparkfun #LCD-16398 The SparkFun SerLCD is an AVR-based, serial enabled LCD that provides a simple and cost effective solution for adding a 20x4 Black on RGB Liquid Crystal Display into your project. 10 for € 29,65 ea. 25 for € 28,92 ea. 50 for € 28,18 ea. 100 for € 27,44 ea. 500 for € 26,70 ea. More information In stock Sold per piece€ 30,40 Incl. VATAdd to cart
- SparkFun Qwiic OLED Display (0.91 in, 128x32) Sparkfun #LCD-17153 The SparkFun Qwiic OLED Display can display up to three lines of text and features 128x32 pixels in a small 0.91” (diagonal) frame. As an OLED, this display does not have a back light layer (unlike LCDs) and therefore it’s thinner, consumes less power, and has higher contrast. 10 for € 9,10 ea. 25 for € 8,84 ea. 50 for € 8,59 ea. 100 for € 8,34 ea. 500 for € 8,08 ea. More information In stock Sold per piece€ 9,35 Incl. VATAdd to cart
- Flexible Qwiic Cable - 500mm Sparkfun #PRT-17257 This is a 500mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. 10 for € 2,43 ea. 25 for € 2,33 ea. 50 for € 2,24 ea. 100 for € 2,14 ea. 500 for € 2,04 ea. More information In stock Sold per piece€ 2,55 Incl. VATAdd to cart
- Flexible Qwiic Cable - 50mm Sparkfun #PRT-17260 This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. 10 for € 1,36 ea. 25 for € 1,30 ea. 50 for € 1,23 ea. 100 for € 1,15 ea. 500 for € 1,08 ea. More information In stock Sold per piece€ 1,45 Incl. VATAdd to cart
- Flexible Qwiic Cable - Female Jumper (4-pin) Sparkfun #CAB-17261 This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and female connectors on the other. The cable insulation is made from a highly malleable material making it more flexible than our original Qwiic cable particularly in tight spaces or enclosures. 10 for € 1,82 ea. 25 for € 1,75 ea. 50 for € 1,66 ea. 100 for € 1,58 ea. 500 for € 1,51 ea. More information In stock Sold per piece€ 1,95 Incl. VATAdd to cart
- Flexible Qwiic Cable - 100mm Sparkfun #PRT-17259 This is a 100mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. 10 for € 1,94 ea. 25 for € 1,85 ea. 50 for € 1,77 ea. 100 for € 1,69 ea. 500 for € 1,60 ea. More information In stock Sold per piece€ 2,05 Incl. VATAdd to cart
- Flexible Qwiic Cable - 200mm Sparkfun #PRT-17258 This is a 200mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well. 10 for € 2,07 ea. 25 for € 1,99 ea. 50 for € 1,90 ea. 100 for € 1,81 ea. 500 for € 1,73 ea. More information In stock Sold per piece€ 2,20 Incl. VATAdd to cart
- Qwiic JST Connector - SMD 4-Pin (Vertical) Sparkfun #PRT-16766 Here is a tiny 4-pin Qwiic 1mm JST connector. This connector mounts to allow you to connect your cable vertically, great for tight spaces. This connector is used on all of our Qwiic-based boards and can be used to create your own I2C-based device compatible with the Qwiic system. 10 for € 1,08 ea. 25 for € 1,02 ea. 50 for € 0,95 ea. 100 for € 0,89 ea. 500 for € 0,83 ea. More information In stock Sold per piece€ 1,15 Incl. VATAdd to cart
- SparkFun Qwiic Single Relay Sparkfun #COM-15093 Have you ever wanted to control something powerful or have you ever needed to turn on/off a high power device from your Arduino or another low powered microcontroller? The SparkFun Qwiic Single Relay provides you with the easiest to use relay yet. 10 for € 13,11 ea. 25 for € 12,77 ea. 50 for € 12,41 ea. 100 for € 12,07 ea. 500 for € 11,72 ea. More information In stock Sold per piece€ 13,50 Incl. VATAdd to cart
- SparkFun Real Time Clock Module - RV-8803 (Qwiic) Sparkfun #BOB-16281 The SparkFun RV-8803 Real Time Clock Module is a Qwiic-enabled breakout board for the RV-8803 RTC. 10 for € 10,90 ea. 25 for € 10,60 ea. 50 for € 10,30 ea. 100 for € 10,01 ea. 500 for € 9,72 ea. More information In stock Sold per piece€ 11,20 Incl. VATAdd to cart
- SparkFun Qwiic MP3 Trigger Sparkfun #DEV-16892 Sometimes you just need an MP3 to play. Whether it's a theme song as you enter the room or a power song when you are working out. 10 for € 21,67 ea. 25 for € 21,11 ea. 50 for € 20,56 ea. 100 for € 20,02 ea. 500 for € 19,47 ea. More information In stock Sold per piece€ 22,25 Incl. VATAdd to cart
- SparkFun Spectral Sensor Breakout - AS7263 NIR (Qwiic) Sparkfun #SEN-14351 The SparkFun AS7263 Near Infrared (NIR) Spectral Sensor Breakout brings spectroscopy to the palm of your hand, making it easier than ever to measure and characterize how different materials absorb and reflect different wavelengths of light. 10 for € 22,09 ea. 25 for € 21,53 ea. 50 for € 20,97 ea. 100 for € 20,41 ea. 500 for € 19,85 ea. More information In stock Sold per piece€ 22,65 Incl. VATAdd to cart
- SparkFun UV Light Sensor Breakout - VEML6075 (Qwiic) Sparkfun #SEN-15089 The VEML6075 UV Light Sensor Breakout is SparkFun’s latest ultraviolet sensing solution. The VEML6075 implements a simple photodiode to measure the levels of UVA (320-400nm) and UVB (280-320nm) radiation. 10 for € 6,05 ea. 25 for € 5,87 ea. 50 for € 5,68 ea. 100 for € 5,51 ea. 500 for € 5,33 ea. More information In stock Sold per piece€ 6,25 Incl. VATAdd to cart
- SparkFun IR Array Breakout - 55 Degree FOV, MLX90640 (Qwiic) Sparkfun #SEN-14844 SparkFun IR Array Breakout - 55 Degree FOV, MLX90640 (Qwiic).It's time to say hip hip array for this IR Breakout! The MLX90640 SparkFun IR Array Breakout is equipped with a 32x24 array of thermopile sensors creating, in essence, a low resolution thermal imaging camera. 10 for € 69,37 ea. 25 for € 67,38 ea. 50 for € 65,39 ea. 100 for € 63,39 ea. 500 for € 61,39 ea. More information In stock Sold per piece€ 71,40 Incl. VATAdd to cart
- TFMini - Micro LiDAR Module (Qwiic) Sparkfun #SEN-14786 The TFMini is a ToF (Time of Flight) LiDAR sensor capable of measuring the distance to an object as close as 30 centimeters and as far as 12 meters! 10 for € 44,21 ea. 25 for € 43,12 ea. 50 for € 42,04 ea. 100 for € 40,95 ea. 500 for € 39,88 ea. More information In stock Sold per piece€ 45,30 Incl. VATAdd to cart
- -17 % SparkFun Triple Axis Accelerometer Breakout - MMA8452Q (Qwiic) Sparkfun #SEN-14587 This breakout board makes it easy to use the tiny MMA8452Q accelerometer communicate over I2C in your project. The MMA8452Q is a smart low-power, three-axis, capacitive MEMS accelerometer with 12 bits of resolution. 10 for € 4,74 ea. 25 for € 4,61 ea. 50 for € 4,48 ea. 100 for € 4,35 ea. 500 for € 4,22 ea. More information In stock Sold per piece€ 5,90 € 4,90 Incl. VATAdd to cart
- SparkFun Environmental Sensor Breakout - BME680 (Qwiic) Sparkfun #SEN-16466 The SparkFun BME680 Environmental Sensor is a breakout that combines a gas sensor with temperature, humidity and barometric pressure sensing for a complete environmental sensor in a single package. 10 for € 21,53 ea. 25 for € 20,99 ea. 50 for € 20,44 ea. 100 for € 19,89 ea. 500 for € 19,34 ea. More information In stock Sold per piece€ 22,10 Incl. VATAdd to cart
- SparkFun High Precision Temperature Sensor - TMP117 (Qwiic) Sparkfun #SEN-15805 The SparkFun Qwiic TMP117 breakout is a high precision temperature sensor equipped with an I2C interface. It outputs temperature readings with high precision of ±0.1°C across the temperature range of -20°C to +50°Cs with no calibration and a maximum range from -55°C to 150°C. 10 for € 12,32 ea. 25 for € 11,99 ea. 50 for € 11,66 ea. 100 for € 11,34 ea. 500 for € 11,- ea. More information In stock Sold per piece€ 12,65 Incl. VATAdd to cart
- -18 % SparkFun Air Quality Sensor - SGP30 (Qwiic) Sparkfun #SEN-16531 The SparkFun SGP30 Air Quality Sensor provides information on the quality of the air in your room or house by monitoring the volatile organic compounds around the sensor. The SGP30 Air Quality Sensor can return valid indoor air quality (IAQ) readings within 15 seconds of powering up! 10 for € 9,16 ea. 25 for € 8,93 ea. 50 for € 8,70 ea. 100 for € 8,46 ea. 500 for € 8,23 ea. More information In stock Sold per piece€ 11,40 € 9,40 Incl. VATAdd to cart
- SparkFun Qwiic Soil Moisture Sensor Sparkfun #SEN-17731 The SparkFun Qwiic Soil Moisture Sensor is a simple breakout for measuring the moisture in soil and similar materials. The soil moisture sensor is pretty straightforward to use. The two large, exposed pads function as probes for the sensor, together acting as a variable resistor. 10 for € 8,93 ea. 25 for € 8,68 ea. 50 for € 8,43 ea. 100 for € 8,18 ea. 500 for € 7,93 ea. More information In stock Sold per piece€ 9,20 Incl. VATAdd to cart
- SparkFun Transparent Graphical OLED Breakout (Qwiic) Sparkfun #LCD-15173 The future is here! The SparkFun Qwiic Transparent Graphical OLED Breakout allows you to display custom images on a transparent screen using either SPI or I2C connections. 10 for € 30,08 ea. 25 for € 29,33 ea. 50 for € 28,58 ea. 100 for € 27,83 ea. 500 for € 27,08 ea. More information Out of stock Sold per piece€ 30,85 Incl. VATAdd to cart
- SparkFun Triad Spectroscopy Sensor - AS7265x (Qwiic) Sparkfun #SEN-15050 The SparkFun Triad Spectroscopy Sensor is a powerful optical inspection sensor also known as a spectrophotometer. Three AS7265x spectral sensors are combined alongside a visible, UV, and IR LEDs to illuminate and test various surfaces for light spectroscopy. 10 for € 63,75 ea. 25 for € 61,70 ea. 50 for € 59,64 ea. 100 for € 57,58 ea. 500 for € 55,53 ea. More information Delivered in 5 to 30 days Sold per piece€ 65,85 Incl. VATAdd to cart
- SparkFun Transparent OLED HUD Breakout (Qwiic) Sparkfun #LCD-15079 Clear screens are no longer a thing of the Sci-Fi world! The Qwiic Transparent OLED HUD is SparkFun's answer to all of your futuristic transparent HUD needs. Designed for use in vehicle heads-up displays, this OLED panel is brilliant in the dark but easily visible in daylight. 10 for € 104,79 ea. 25 for € 102,27 ea. 50 for € 99,76 ea. 100 for € 97,25 ea. 500 for € 94,74 ea. More information Out of stock Sold per piece€ 107,30 Incl. VATAdd to cart
- Qwiic JST Connector - SMD 4-pin Sparkfun #PRT-14417 Here is a tiny 4-pin Qwiic 1mm JST connector. This connector is used on all of our Qwiic-based boards and can be used to create your own I2C-based device compatible with the Qwiic system. Additionally, this connector will mate with all of our Qwiic cables with a solid lock. 10 for € 1,07 ea. 25 for € 1,- ea. 50 for € 0,94 ea. 100 for € 0,87 ea. 500 for € 0,81 ea. More information Delivered in 5 to 30 days Sold per piece€ 1,15 Incl. VATAdd to cart
- SparkFun Qwiic HAT for Raspberry Pi Sparkfun #DEV-14459 The SparkFun Qwiic HAT for Raspberry Pi is the quickest and easiest way to enter into SparkFun’s Qwiic ecosystem while still using that Raspberry Pi that you’ve come to know and love. 10 for € 6,42 ea. 25 for € 6,22 ea. 50 for € 6,04 ea. 100 for € 5,85 ea. 500 for € 5,65 ea. More information Delivered in 5 to 30 days Sold per piece€ 6,65 Incl. VATAdd to cart
- -17 % SparkFun Qwiic Twist - RGB Rotary Encoder Breakout Sparkfun #DEV-15083 The SparkFun Qwiic Twist is a digital RGB rotary encoder breakout that is also able to connect to our Qwiic Connect System. The Twist takes care of all the various interrupts, switches, PWM'ing of LEDs, and presents all those features over an easy-to-use I2C interface. 10 for € 19,59 ea. 25 for € 19,09 ea. 50 for € 18,60 ea. 100 for € 18,10 ea. 500 for € 17,59 ea. More information Delivered in 5 to 30 days Sold per piece€ 24,35 € 20,10 Incl. VATAdd to cart
- SparkFun Qwiic Pro Micro - USB-C (ATmega32U4) Sparkfun #DEV-15795 Here at SparkFun, we refuse to leave 'good enough' alone. That's why we're adding to our line-up of Arduino-compatible microcontrollers once more! The SparkFun Qwiic Pro Micro is a revision of the original Pro Micro and is, overall, functionally the same as the previous version. 10 for € 21,06 ea. 25 for € 20,20 ea. 50 for € 19,34 ea. 100 for € 18,49 ea. 500 for € 17,63 ea. More information Delivered in 5 to 30 days Sold per piece€ 21,95 Incl. VATAdd to cart
- SparkFun Qwiic Quad Solid State Relay Kit Sparkfun #KIT-16833 The SparkFun Qwiic Quad Solid State Relay Kit takes one of our favorite solid state relays and lets you place up to four of them on a single PCB to control all of them via I2C from your desired microcontroller. 10 for € 41,20 ea. 25 for € 40,20 ea. 50 for € 39,19 ea. 100 for € 38,17 ea. 500 for € 37,16 ea. More information Delivered in 5 to 30 days Sold per piece€ 42,25 Incl. VATAdd to cart
- SparkFun Grid-EYE Infrared Array Breakout - AMG8833 (Qwiic) Sparkfun #SEN-14607 Get ready to be able to see like the Predator! The SparkFun Grid-EYE Infrared Array Breakout board is an 8x8 thermopile array, meaning you have a square array of 64 pixels capable of independent temperature detection. It’s like having a thermal camera, just in a lower resolution. 10 for € 45,06 ea. 25 for € 43,96 ea. 50 for € 42,85 ea. 100 for € 41,75 ea. 500 for € 40,65 ea. More information Delivered in 5 to 30 days Sold per piece€ 46,20 Incl. VATAdd to cart
- SparkFun Qwiic GPIO Sparkfun #DEV-17047 Do you find yourself wishing that you had just a few more GPIO pins? What if you only need that one more pin? You could add another microcontroller to your project but that increases cost and complexity. Instead, you can use the Qwiic GPIO to add eight new pins to your Qwiic project! 10 for € 4,92 ea. 25 for € 4,77 ea. 50 for € 4,62 ea. 100 for € 4,46 ea. 500 for € 4,30 ea. More information Delivered in 5 to 30 days Sold per piece€ 5,10 Incl. VATAdd to cart
- Adafruit LSM6DSO32 6-DoF Accelerometer and Gyroscope Adafruit #4692 Behold, the ST LSM6DSO32: The latest in a long line of quality Accelerometer+Gyroscope 6-DOF IMUs from ST. This lil IMU is like a big sister to the LSM6DSOX, it has the same pin out and firmware - but the accelerometer component can go up to 32g instead of the normal 16g maximum. More information Delivered in 10 to 30 days Sold per piece€ 12,00 Incl. VATAdd to cart
- Adafruit MCP4728 Quad DAC with EEPROM Adafruit #4470 If you've ever said to yourself, "Gee, I wish I had four 12-bit DACs that came in a single package with the ability to save their settings to an EEPROM", well I have good news. The MCP4728 is the answer to your wishes! More information Out of stock Sold per piece€ 7,05 Incl. VATAdd to cart
- SparkFun Qwiic Flex Glove Controller Sparkfun #SEN-14666 Flex sensors are great for telling how bent something is in a project, but we’ve been running into issues with durability when using them in wearable applications like gloves. More information Delivered in 5 to 30 days Sold per piece€ 35,20 Incl. VATAdd to cart
- SparkFun Qwiic Mux Breakout - 8 Channel (TCA9548A) Sparkfun #BOB-16784 Do you have too many sensors with the same I2C address? Put them on the SparkFun Qwiic Mux Breakout to get them all talking on the same bus! The Qwiic Mux Breakout enables communication with multiple I2C devices that have the same address that makes it simple to interface with. More information Out of stock Sold per piece€ 9,60 Incl. VATAdd to cart
- SparkFun Qwiic Shield for Arduino Sparkfun #DEV-14352 The SparkFun Qwiic Shield is an easy-to-assemble board that provides a simple way to incorporate the Qwiic Connect System with your Arduino Uno. More information Delivered in 5 to 30 days Sold per piece€ 6,40 Incl. VATAdd to cart
- SparkFun RedBoard Qwiic Sparkfun #DEV-15123 At SparkFun we continually like to innovate, update, and improve even when it comes to our very own development boards. We have multiple versions of the SparkFun RedBoard in our catalog but none of them in an R3 form factor with a Qwiic connector on it to make I2C easy... until now! 10 for € 14,59 ea. 25 for € 14,21 ea. 50 for € 13,82 ea. 100 for € 13,44 ea. 500 for € 13,07 ea. More information Delivered in 5 to 30 days Sold per piece€ 15,00 Incl. VATAdd to cart
- SparkFun Qwiic Shield for Arduino Nano Sparkfun #DEV-16789 The SparkFun Qwiic Shield for Arduino Nano provides you with a quick and easy way to enter into SparkFun's Qwiic ecosystem with your Arduino Nano board. More information Delivered in 5 to 30 days Sold per piece€ 4,40 Incl. VATAdd to cart
- SparkFun RedBoard Turbo - SAMD21 Development Board Sparkfun #DEV-14812 If you’re ready to step up your Arduino game from older 8-bit/16MHz microcontrollers, the SparkFun RedBoard Turbo is a formidable alternative. At its heart, the RedBoard Turbo uses the ATSAMD21G18, which is an ARM Cortex M0+, 32-bit microcontroller that can run at up to 48MHz. More information Delivered in 5 to 30 days Sold per piece€ 20,80 Incl. VATAdd to cart
