

Menu

Order before 23:59, same day shipping Free shipping from € 100,- Customer rating: 4.9 / 5 Excellent serviceBusinesses Contact

JST PH - 2.0mm

This is a thin, low profile connector with a pitch of 2.0mm, 8.0mm high after mounting and 4.5mm wide.

JST SH - 1.0mm JST GH - 1.25mm JST ZH - 1.5mm JST PH - 2.0mm JST XH - 2.5mm JST SM - 2.5mm

16 results Sort by

JST-PH 2-Pin SMT Right Angle Breakout Board Adafruit #1862 A simple 2-pin connector soldered onto a breadboard-friendly breakout. This is compatible with the "JST PH 2-pin" connector. Mates perfectly with all our 1-cell LiPoly and LiIon batteries as well as our 6V coin cell holder and 3xAAA battery pack.
In stock
€ 1,70 Incl. VAT
3 x AAA Battery Holder with On/Off Switch and 2-Pin JST Adafruit #727 This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. We spec'd these out because the box is slim, and 3 AAA's add up to about 3.3-4.5V, a very similar range to Lithium Ion/polymer (Li-Ion) batteries and have an on-off switch.
In stock
€ 4,00 Incl. VAT
2xAAA Battery Cage with JST Connector Kitronik #2271 This 2xAAA Battery Cage with JST connector is compatible with the Igloo, PICAXE wearable module and the BBC micro:bit.
In stock
€ 1,50 Incl. VAT
2x AAA Battery Box with Switch and JST Connector Kitronik #2225 This 2 x AAA Battery box features a slide and click cover, built in on/off switch the 150mm leads terminate in a JST connector.
In stock
€ 2,15 Incl. VAT
Gravity: Digital Sensor Cable for Arduino - 50cm (10 Pack) DFRobot #FIT0756 This high-quality 50cm digital sensor cable is equipped with a 3-pin PH2.0 plug connector on one side and a 3-pin DuPont connector on the other side.
In stock
€ 7,10 Incl. VAT
Gravity: Analog Sensor Cable for Arduino - 50cm (10 Pack) DFRobot #FIT0769 This high-quality 50cm analog sensor cable is equipped with a 3-pin PH2.0 plug connector on one side and a 3-pin DuPont connector on the other side.
In stock
€ 7,10 Incl. VAT
Battery Holder 2xAA with Cover and Switch - JST Connector Sparkfun #PRT-09925 Boost your battery-powered projects with the compact, efficient Sparkfun 2xAA Battery Holder. Features a secure cover, ON/OFF switch, and a JST-XH connector for reliable power supply.
In stock
€ 1,35 Incl. VAT
JST-PH Battery Extension Cable - 500mm Adafruit #1131 By popular demand, we now have a handy extension cord for all of our JST-terminated battery packs (such as our LiIon/LiPoly and 3xAAA holders). One end has a JST-PH socket, and the other end has a matching plug. Between the two, 500mm of color coded wire.
Delivered in 10 to 30 days
€ 3,70 Incl. VAT
JST PH 2,3,4,5 Pin connector Kit - 2.0mm - 230 pieces This JST PH connector kit contains a total of 80 JST connectors (40 male and 40 female) with 150 pin terminals. The kit contains 20 x 2 pin (male + female), 20 x 3 pin (male + female), 20 x 4 pin (male + female) and 10 x 5 pin (male + female) connectors.
Out of stock
€ 5,55 Incl. VAT
3-Pin Female JST PH-Style Cable (30 cm) for Sharp Distance Sensors Pololu #117 This 12-inch (30-cm) cable has 26 AWG wires and a 3-pin female JST PH-style connector that works with Sharp analog distance sensors that have mating PH connectors. The other ends of the wires are unterminated; they can be cut to length to match your application.
Delivered in 5 to 14 days
€ 2,00 Incl. VAT
Gravity: Digital Sensor Cable for Arduino (10 Pack) DFRobot #FIT0011 The digital sensor cables are especially designed for our popular IO Expansion shield and sensors. It connects most of our digital sensor to the IO board. This price includes 10 pieces of cables.Specification Length:30cm (12 in)Maximum voltage:
Delivered in 5 to 10 days
€ 5,90 Incl. VAT
Gravity: Analog Sensor Cable for Arduino (10 Pack) DFRobot #FIT0031 The analog sensor cables are especially designed for our popular IO Expansion shield and sensors. It connects most of our analog sensor to the IO board. This price includes 10 pieces of cables.
Delivered in 5 to 10 days
€ 4,85 Incl. VAT
Gravity: 4Pin I2C/UART Sensor Cable (10pcs) DFRobot #FIT0513 The Gravity 4Pin I2C/UART sensor cable is a standard Gravity series 4-Pin cable with 30cm length.One side is PH2.0-4p connector and the other side is XH2.54 DuPont port. it is compatible with standard breadboard pin pitch, which makes it easy to make a DIY application.
Delivered in 5 to 10 days
€ 7,10 Incl. VAT
4-pin JST PH to JST SH Cable - STEMMA to QT / Qwiic Adafruit #4424 Are you a maker in the midst of a STEMMA dilemma? This 200mm long 4-wire cable is a fantastic chimera-cable fitted with STEMMA QT / Sparkfun Qwiic JST SH on one end, and STEMMA JST PH connectors on...
Delivered in 10 to 30 days
€ 1,10 Incl. VAT
PH2.0 connector Kit - 2.0mm DFRobot #FIT0299 This kit includes PHR-2，PHR-3 and PHR-4 housing (20 units each), through-hole type shrouded header (20 units each) and crimp contact (100 units).
Delivered in 5 to 10 days
€ 11,00 Incl. VAT
Battery Holder - 2xAA (JST-PH) Sparkfun #PRT-14299 Get the reliable Sparkfun Battery Holder - 2xAA (JST-PH) for your projects. Ideal for electronics enthusiasts and engineers, it offers a stable power source and easy integration.
Delivered in 5 to 10 days
€ 1,75 Incl. VAT

The 3 most popular JST PH - 2.0mm



Order before 23:59, same day shipping Free shipping from € 100,- Customer rating: 4.9 / 5 Excellent service