Account

Account overview

Add to order

Adding items to an placed order is very easy!
Add the forgotten item to the shopping cart and click "add to order".

More info

JST Connectors

JST connectors are used in many types of products, and commonly used by electronics hobbyists and consumer products for rechargeable battery packs, battery balancers, battery eliminator circuits, 3D printers, and radio controlled servos.

JST SH - 1.0mm JST GH - 1.25mm JST ZH - 1.5mm JST PH - 2.0mm JST XH - 2.5mm JST SM - 2.5mm

42 resultsSort by

Micro JST 2-Pin 1.25mm male/female connector paar - 5 stuks This is a set of 5 pairs of micro JST connectors, male and female. These micro JST connectors have a pitch (pin distance) of 1.25mm and have 2 wires. Contents: 5x male connectors, 5x female connectors
In stock
€ 2,70 Incl. VAT
JST-PH 2-Pin SMT Right Angle Breakout Board Adafruit #1862 A simple 2-pin connector soldered onto a breadboard-friendly breakout. This is compatible with the "JST PH 2-pin" connector. Mates perfectly with all our 1-cell LiPoly and LiIon batteries as well as our 6V coin cell holder and 3xAAA battery pack.
In stock
€ 2,00 Incl. VAT
JST XH 2,3,4 Pin connector Kit - 2.54mm - 100 pieces This JST XH connector kit contains a total of 100 JST connectors (50 male and 50 female). The kit contains 20 x 2 pin (male + female), 20 x 3 pin (male + female) and 10 x 4 pin (male + female) connectors.
In stock
€ 5,15 Incl. VAT
4-pin JST SM Plug + Receptacle Cable Set Adafruit #578 These 4-wire cables are 15cm long and come as a set, one side has a JST SM type connector plug on the end. The other side has a matching JST SM type receptacle connector. They are good for whenever you have 4 wires you want to be able to plug and unplug.
In stock
€ 2,45 Incl. VAT
2-pin JST SM Plug + Receptacle Cable Set Adafruit #2880 These 2-wire cables are 16cm long and come as a set. One side has a 2-pin JST SM type connector plug on the end. The other side has a matching 2-pin JST SM type receptacle connector. They are good for whenever you have 2 wires you want to be able to plug and unplug.
In stock
€ 1,40 Incl. VAT
3 x AAA Battery Holder with On/Off Switch and 2-Pin JST Adafruit #727 This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. We spec'd these out because the box is slim, and 3 AAA's add up to about 3.3-4.5V, a very similar range to Lithium Ion/polymer (Li-Ion) batteries and have an on-off switch.
In stock
€ 3,00 Incl. VAT
Qwiic Cable - Breadboard Jumper (4-pin) Sparkfun #PRT-14425 This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and a breadboard hookup pigtail on the other. This cable makes it easy to connect components with a Qwiic connector to a breadboard or an Arduino-based device’s pins.
In stock
€ 2,40 Incl. VAT
JST-PH Battery Extension Cable - 500mm Adafruit #1131 By popular demand, we now have a handy extension cord for all of our JST-terminated battery packs (such as our LiIon/LiPoly and 3xAAA holders). One end has a JST-PH socket, and the other end has a matching plug. Between the two, 500mm of color coded wire.
In stock
€ 3,55 Incl. VAT
SparkFun Qwiic Cable Kit Sparkfun #KIT-15081 The SparkFun Qwiic Connect System is constantly growing in popularity with makers. So to make it even easier to get started, we've assembled this Qwiic Cable Kit for everyone.
In stock
€ 12,55 Incl. VAT
2xAAA Battery Cage with JST Connector Kitronik #2271 This 2xAAA Battery Cage with JST connector is compatible with the Igloo, PICAXE wearable module and the BBC micro:bit.
In stock
€ 1,70 Incl. VAT
Qwiic Cable - 50mm Sparkfun #PRT-14426 This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well.Each Qwiic Cable's wires have been color coded to red, black, blue and yellow.
In stock
€ 2,10 Incl. VAT
Qwiic JST Connector - SMD 4-pin Sparkfun #PRT-14417 Here is a tiny 4-pin Qwiic 1mm JST connector. This connector is used on all of our Qwiic-based boards and can be used to create your own I2C-based device compatible with the Qwiic system. Additionally, this connector will mate with all of our Qwiic cables with a solid lock.
In stock
€ 1,60 Incl. VAT
JST PH 2,3,4,5 Pin connector Kit - 2.0mm - 230 pieces This JST PH connector kit contains a total of 80 JST connectors (40 male and 40 female) with 150 pin terminals. The kit contains 20 x 2 pin (male + female), 20 x 3 pin (male + female), 20 x 4 pin (male + female) and 10 x 5 pin (male + female) connectors.
In stock
€ 6,15 Incl. VAT
3-pin JST SM Plug + Receptacle Cable Set Adafruit #1663 These 3-wire cables are 163mm (6.4") long and come as a set. One cable has a JST SM type connector plug on the end. The other cable has a matching JST SM type receptacle connector. They are good for whenever you have 3 wires you want to be able to plug and unplug.
In stock
€ 2,05 Incl. VAT
2x AAA Battery Box with Switch and JST Connector Kitronik #2225 This 2 x AAA Battery box features a slide and click cover, built in on/off switch the 150mm leads terminate in a JST connector.The JST connector is that same type of connector found on the microbit making it an ideal powering solution for your microbit projects.
In stock
€ 2,05 Incl. VAT
JST XH Female Crimp Terminal 22AWG - 100 stuks JST XH Female Crimp Terminas for 22AWG wire size in a set of 100 pcs. JST XH connectors have a pitch of 2.5mm and are mainly used to connect power to a printed circuit board.
In stock
€ 3,40 Incl. VAT
Breakout for JST SH-Style Connector, 6-Pin Male Top-Entry Pololu #4770 Breakout for JST SH-Style Connector, 6-Pin Male Top-Entry.This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1″-pitch through holes.
In stock
€ 1,70 Incl. VAT
Clearance
-50 %
Gravity: Digital Sensor Cable for Arduino (10 Pack) DFRobot #FIT0011 The digital sensor cables are especially designed for our popular IO Expansion shield and sensors. It connects most of our digital sensor to the IO board. This price includes 10 pieces of cables.Specification Length:30cm (12 in)Maximum voltage:
In stock
€ 7,15 € 3,55 Incl. VAT
Clearance
-84 %
Gravity: Analog Sensor Cable for Arduino (10 Pack) DFRobot #FIT0031 The analog sensor cables are especially designed for our popular IO Expansion shield and sensors. It connects most of our analog sensor to the IO board. This price includes 10 pieces of cables.
In stock
€ 7,05 € 1,15 Incl. VAT
Gravity: 4Pin I2C/UART Sensor Cable (10pcs) DFRobot #FIT0513 The Gravity 4Pin I2C/UART sensor cable is a standard Gravity series 4-Pin cable with 30cm length.One side is PH2.0-4p connector and the other side is XH2.54 DuPont port. it is compatible with standard breadboard pin pitch, which makes it easy to make a DIY application.
In stock
€ 6,80 Incl. VAT
Flexible Qwiic Cable - 500mm Sparkfun #PRT-17257 This is a 500mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well.
In stock
€ 3,85 Incl. VAT
Flexible Qwiic Cable - 50mm Sparkfun #PRT-17260 This is a 50mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well.
In stock
€ 1,85 Incl. VAT
Flexible Qwiic Cable - Female Jumper (4-pin) Sparkfun #CAB-17261 This is a jumper adapter cable that comes pre-terminated with a female Qwiic JST connector on one end and female connectors on the other. The cable insulation is made from a highly malleable material making it more flexible than our original Qwiic cable particularly in tight spaces or enclosures.
In stock
€ 2,85 Incl. VAT
Flexible Qwiic Cable - 100mm Sparkfun #PRT-17259 This is a 100mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well.
In stock
€ 2,65 Incl. VAT
Flexible Qwiic Cable - 200mm Sparkfun #PRT-17258 This is a 200mm long 4-conductor cable with 1mm JST termination. It’s designed to connect Qwiic enabled components together but can be used for other applications as well.
In stock
€ 2,75 Incl. VAT
Wemos I2C Kabel 100mm SH1.0 4p Lolin This 100mm cable has a SH1.0 4p connector on both ends. The cable is suitable for the I2C headers of the Wemos modules and shields.
In stock
€ 1,55 Incl. VAT
Micro JST 3-Pin 1.25mm male/female connector paar - 5 stuks This is a set of 5 pairs of micro JST connectors, male and female. These micro JST connectors have a pitch (pin distance) of 1.25mm and have 3 wires.Contents:5x male connectors5x female connectors
In stock
€ 2,85 Incl. VAT
Clearance
-67 %
Gravity: Digital Sensor Cable for Arduino - 50cm (10 Pack) DFRobot #FIT0756 This high-quality 50cm digital sensor cable is equipped with a 3-pin PH2.0 plug connector on one side and a 3-pin DuPont connector on the other side.
In stock
€ 9,40 € 3,10 Incl. VAT
Clearance
-67 %
Gravity: Analog Sensor Cable for Arduino - 50cm (10 Pack) DFRobot #FIT0769 This high-quality 50cm analog sensor cable is equipped with a 3-pin PH2.0 plug connector on one side and a 3-pin DuPont connector on the other side.
In stock
€ 9,40 € 3,10 Incl. VAT
XH2.5 connector Kit - 2.5mm DFRobot #FIT0255 This kit includes XH-2, XH-3, and XH-4 housing (20 units each), through-hole type shrouded header (20 units each), and crimp contact (100 units).
In stock
€ 10,05 Incl. VAT
PH2.0 connector Kit - 2.0mm DFRobot #FIT0299 This kit includes PHR-2，PHR-3 and PHR-4 housing (20 units each), through-hole type shrouded header (20 units each) and crimp contact (100 units).
In stock
€ 10,60 Incl. VAT
5p JST Led strip connector set 2x male + 2x female This Led strip connector set is suitable for an RGBW or digital (WS2813) LED strip. The set comes with a male and female connector with a length of approximately 10 cm.
Out of stock
€ 2,90 Incl. VAT
3-Pin Female JST ZH-Style Cable (30cm) for Sharp GP2Y0A51 Distance Sensors Pololu #2411 This 12-inch (30-cm) cable has 28 AWG wires and a 3-pin female JST ZH-style connector that mates with the 3-pin connector on Sharp GP2Y0A51 analog distance sensors. The other ends of the wires are unterminated; they can be cut to length to match your application.
Delivered in 5 to 30 days
€ 2,20 Incl. VAT
3-Pin Female JST PH-Style Cable (30 cm) for Sharp Distance Sensors Pololu #117 This 12-inch (30-cm) cable has 26 AWG wires and a 3-pin female JST PH-style connector that works with Sharp analog distance sensors that have mating PH connectors. The other ends of the wires are unterminated; they can be cut to length to match your application.
Delivered in 5 to 30 days
€ 2,00 Incl. VAT
Breakout for JST SH-Style Connector, 6-Pin Male Side-Entry Pololu #4772 This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1″-pitch through holes.
Delivered in 5 to 30 days
€ 1,70 Incl. VAT
6-Pin Female-Female JST SH-Style Cable 40cm Pololu #4768 This 40 cm (16″) cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor Encoders with top-entry connectors and with side-entry connectors as well as our breakout boards with top-entry and side-entry connectors.
Delivered in 5 to 30 days
€ 3,10 Incl. VAT
6-Pin Female-Female JST SH-Style Cable 63cm Pololu #4769 This 63 cm (25″) cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor Encoders with top-entry connectors and with side-entry connectors as well as our breakout boards with top-entry and side-entry connectors.
Delivered in 5 to 30 days
€ 3,70 Incl. VAT
6-Pin Female-Female JST SH-Style Cable 25cm Pololu #4767 This 25 cm (10″) cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor Encoders with top-entry connectors and with side-entry connectors as well as our breakout boards with top-entry and side-entry connectors.
Delivered in 5 to 30 days
€ 2,80 Incl. VAT
6-Pin Female-Female JST SH-Style Cable 16cm Pololu #4766 This 16 cm (6.3″) cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor Encoders with top-entry connectors and with side-entry connectors as well as our breakout boards with top-entry and side-entry connectors.
Delivered in 5 to 30 days
€ 3,15 Incl. VAT
6-Pin Female-Female JST SH-Style Cable 10cm Pololu #4765 This 10 cm (4″) cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends.
Delivered in 5 to 30 days
€ 2,70 Incl. VAT
4-pin JST PH to JST SH Cable - STEMMA to QT / Qwiic Adafruit #4424 Are you a maker in the midst of a STEMMA dilemma? This 200mm long 4-wire cable is a fantastic chimera-cable fitted with STEMMA QT / Sparkfun Qwiic JST SH on one end, and STEMMA JST PH connectors on the other.
Delivered in 10 to 30 days
€ 1,55 Incl. VAT
TFT e-Paper Cable 10P 200mm 20cm for WEMOS SH1.0 10P double head cable Lolin JST-SH1.0 10P TFT e-Paper Cable with a length of 200mm for WEMOS pro modules.
Delivered in 14 to 40 days
€ 1,90 Incl. VAT

Ordered today, delivered Tuesday Free shipping from € 100,- Customer rating: 4.8 / 5 Excellent service