Material

Material to build projects such as enclosures, protoboards, breadboards, cables and wiring.

1933 results Sort by

Load previous

Pololu Nylon Spacer: 6mm Length, 4mm OD, 2.7mm ID (50-Pack) Pololu #1972 Keep your components separated with this 50-pack of 6mm-long (0.24") nylon spacers. These spacers have an outer diameter (OD) of 4 mm (0.16") and an inner diameter (ID) of 2.7 mm (0.11"), and they work with #2 and M2 screws.
In stock
€ 3,10 Incl. VAT
Pololu Nylon Spacer: 10mm Length, 4mm OD, 2.7mm ID (25-Pack) Pololu #1974 Keep your components separated with this 25-pack of 10mm-long (0.39") nylon spacers. These spacers have an outer diameter (OD) of 4 mm (0.16") and an inner diameter (ID) of 2.7 mm (0.11"), and they work with #2 and M2 screws.
In stock
€ 2,55 Incl. VAT
Pololu Nylon Spacer: 22mm Length, 4mm OD, 2.7mm ID (10-Pack) Pololu #1978 Keep your components separated with this 10-pack of 22mm-long (7/8") nylon spacers. These spacers have an outer diameter (OD) of 4 mm (0.16") and an inner diameter (ID) of 2.7 mm (0.11"), and they work with #2 and M2 screws.
In stock
€ 2,35 Incl. VAT
Pololu Magnetic Encoder Pair Kit with Side-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18V Pololu #4761 Magnetic Encoder Pair Kit with Side-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18V. Add quadrature encoders to your micro metal gearmotors (extended back shaft version required) with this kit that uses a magnetic disc and hall effect sensors to provide 12 counts per revolution of the...
In stock
€ 10,55 Incl. VAT
Pololu Magnetic Encoder Pair Kit with Top-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18V Pololu #4760 Magnetic Encoder Pair Kit with Top-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18V. Add quadrature encoders to your micro metal gearmotors (extended back shaft version required) with this kit that uses a magnetic disc and hall effect sensors to provide 12 counts per revolution of the...
In stock
€ 13,45 Incl. VAT
Adafruit USB DIY Slim Connector Shell - MicroB Plug Adafruit #1826 Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. This is the 'slim' version of the DIY MicroB Male connector.
In stock
€ 1,60 Incl. VAT
Kitronik 2x AAA Battery Box with Switch and JST Connector Kitronik #2225 This 2 x AAA Battery box features a slide and click cover, built in on/off switch the 150mm leads terminate in a JST connector.
In stock
€ 2,15 Incl. VAT
DFRobot Solar Power Manager Micro (2V 160mA Solar Panel Included) DFRobot #DFR0579 Solar Power Manager Micro is a micro power, high-efficiency solar power management module, designed for powering IoT based low-power wireless sensors or controllers with 1V~3V small size solar panels.
In stock
€ 21,50 Incl. VAT
Sparkfun USB 3.1 Cable A to C - (3 Foot/0.91 meter) Sparkfun #CAB-14743 Upgrade to the Sparkfun USB 3.1 Cable A to C - 3 Foot (~1 meter) for high-speed data transfers and efficient charging. Reliable, robust and ideal for laptop users. Superior performance in a convenient length.
In stock
€ 9,35 Incl. VAT
Sparkfun Reversible USB A to C Cable - 0.3m Sparkfun #CAB-15426 Discover the Sparkfun Reversible USB A to C Cable. Measuring 0.3m, it's perfect for USB 2.0 connections and supports speeds and charging up to 2A. Ideal for smaller applications.
In stock
€ 7,30 Incl. VAT
DFRobot MTO1804 Brushless DC Motor (CW) DFRobot #FIT0633 Designed for multi-rotor wings, this brushless DC motor is a boon for all drone enthusiasts. The brushless DC motor has the following features: capable of outputting large torques at low speeds and...
In stock
€ 31,25 Incl. VAT
DFRobot Brushless DC Motor MTO1804 (CCW) DFRobot #FIT0632 Designed for multi-rotor projects, this brushless DC motor is a boon for all drone enthusiasts. The brushless DC motor has the following features: capable of outputting large torques at low speeds...
In stock
€ 31,25 Incl. VAT
Kitronik 1xAA battery Cage with Leads Kitronik #2231-01 This battery cage houses a single AA battery and is barely bigger than the battery it is designed to hold.
In stock
€ 1,25 Incl. VAT
Opencircuit 24V High Torque motor - 10RPM - 75KG - with Square Gearbox Metal gearmotor with wormwheel driver. The motor has a speed of 10RPM and can be powered by 24V. The motor has a really hight torque power of 75kg.cm.
In stock
€ 28,50 Incl. VAT
Sale
-49 %
Camelion CR1220 button cell battery 3V - 35mAh - 5 pieces Camelion #CR1220C CR1220 button cell battery 3V - 35mAh - 5 piecesSpecificationsLast name. spanning: 3.0VType. capacity: 35mAhIEC: CR1220Dimensions: 12.5 x 2.0mmPackaging: 5 pieces in blister packaging
In stock
€ 4,85 € 2,45 Incl. VAT
Sparkfun USB Female Type C Connector Sparkfun #COM-15111 Upgrade your electronics with Sparkfun's 16-pin USB Female Type C Connector. Designed for easy insertion and reliable connection, it's perfect for smartphones, laptops, and DIY projects. Requires PTH and SMD soldering.
In stock
€ 5,10 Incl. VAT
Whadda Screws, nuts, spacers and washers set including storage box Whadda #WCS400 This Velleman screw, nut, standoff, and washer set is perfect for mounting your electronic projects. The set includes nylon and brass parts in different sizes, nickel-plated brass screws and nuts, nickel-plated brass M3 size washers, and comes in a sturdy plastic storage box.
In stock
€ 12,10 Incl. VAT
Whadda Push buttons and switches set - including storage box Whadda #WCS300 A set with push buttons and switches in different sizes, colors and shapes.
In stock
€ 26,40 Incl. VAT
Cytron Cable Cover and Management Sleeve 16mm 1 meter Cytron #WR-CC-16MM Cable Cover and Management Sleeve 16mm 1 meter ease you to keep your electronics cable or wires to be more tidied,managed and protected.
In stock
€ 2,35 Incl. VAT
Opencircuit Nichrome 80 Round Wire 0.5mm - 24 AWG - 5.55Ω - 7.5 meter Cr20Ni80 is usually used for high temperature furnaces in the heat treating, ceramics, glass, steel, and electronic industries.SpecificationsMaterial: Nichrome (Cr20Ni80)Main Color: Silver Tone.OD:0.5mmLength:7.5m
In stock
€ 4,45 Incl. VAT
Velleman Connector set for low voltage applications - including storage box Velleman #VCS200 Assemble your own connectors with the Velleman Connectors Set for Low-Voltage Applications. Includes a variety of connectors, heat shrink tubes, and a handy storage box.
In stock
€ 18,50 Incl. VAT
Opencircuit JST XH Female Crimp Terminal 22AWG - 100 stuks JST XH Female Crimp Terminas for 22AWG wire size in a set of 100 pcs. JST XH connectors have a pitch of 2.5mm and are mainly used to connect power to a printed circuit board.
In stock
€ 3,55 Incl. VAT
Cytron PC104 Header Pin (2x20) Cytron #CN-PH-PC104 2X20 bus connector that compatible with PC/104 industry standard designed for stacking boards with a common bus.
In stock
€ 2,15 Incl. VAT
Opencircuit Magnet tape, 750 x 25 x 2mm Opencircuit #56471 Very handy magnetic tape for attaching all kinds of small parts to different surfaces. The self-adhesive magnetic tape is 75 cm long, and can easily be shortened to any desired length.
In stock
€ 3,15 Incl. VAT
McPower Mirror tool, telescope 16-70cm, Ø mirror 50mm McPower #1533539 The McPower Mirror Tool with telescope function is ideal for inspections in hard-to-reach places. The telescope has a range of 16-70cm and a 50mm mirror. It's compact and lightweight, perfect for professionals.
In stock
€ 3,55 Incl. VAT
Cytron Push Button Panel Mount 12MM with Wire (20cm) Cytron #SW-PBM-12R-W OK, this item is pretty simple yet practical - it's a panel mount pushbutton with red button on top, no LEDs, no bells & whistles.
In stock
€ 0,65 Incl. VAT
Feetech Linear Actuator Kit - Feetech FS90 Feetech #FS90 Our new Linear Actuator converts the circular movement of a 180 degree servo (supplied) into motion in a straight line, one way and then the other. It can be mounted to a project to provide either horizontal or vertical movement.
In stock
€ 7,80 Incl. VAT
Opencircuit Ventilator 40x20mm 24V 2pin - glijlager 40x40mm fan to create an airflow that keeps components cooler. This fan runs on 24V and has a connector with 2 pins.
In stock
€ 3,90 Incl. VAT
Kitronik Heat Shrink Mini Reel - 2.4mm, 11 meter Kitronik #2432 This handy real of heat shrink has 11 meter of heat shrink with a thickness of 2,4mm. It shrinks to around half the size when heated.
In stock
€ 17,00 Incl. VAT
Sparkfun Heatsink Compound Sparkfun #PRT-09599 Boost heat dissipation with Sparkfun Heatsink Compound. Ideal for voltage regulators, MOSFETs, & more. High thermal conductivity, low evaporation & bleed rate for consistent performance.
In stock
€ 4,45 Incl. VAT
Opencircuit 5W Full Spectrum USB LED Lamp For Plant Growing The LED Plant Grow Lamp contains 27 LEDs(18 red LEDs + 9 blue LEDs) gives off targeted wavelengths (including 460nm and 660nm) light to help accelerate the growth of indoor plants, foliage p
In stock
€ 10,55 Incl. VAT
Velleman Replacement Soldering Tip for the VTSI30 Velleman #BITSI30 The Velleman - BITSI30 is a spare part for the VTSI30: HIGH-Q soldering iron 30W / 230V. This soldering tip features a conical shape, a straight shaft, and a closed end. It's made of metal and weighs 6.5 grams. Ideal for precision soldering and desoldering.
In stock
€ 4,20 Incl. VAT
Itead Zigbee CC2531 USB Dongle Itead #CC2531 USB dongle To run zigbee2mqtt for the control of SONOFF Zigbee products like BASICZBR3, S31 Lite Zb in your home automation system, a CC2531 USB dongle integration is recommended.
In stock
€ 7,75 Incl. VAT
Pimoroni Extended Pi Standoffs Pimoroni #COM2102 Need a little extra height for your project? These extended standoffs give the extra clearance you need!The standoffs have a 2.5mm screw at one end, which could be used to pass through a Raspberry Pi or other PCB and have a screw attached for a secure fit.
In stock
€ 4,75 Incl. VAT
Pimoroni M2.5 Standoffs for Pi HATs - Black Plated - Pack of 2 Pimoroni #COM2100 Our standoffs are engineered specifically to keep your Pi HAT or pHAT snug and supported on your Pi while also keeping the two boards separated. They're the perfect companion for any Pi HAT/pHAT combo. Contents2 x 10mm M2.5 F-F standoff4 x 6mm screw
In stock
€ 2,55 Incl. VAT
Pololu Breakout for JST SH-Style Connector, 6-Pin Male Side-Entry Pololu #4772 This simple board serves as an adapter between a JST SH-style 6-pin male connector and breadboard-compatible 0.1″-pitch through holes.
In stock
€ 1,80 Incl. VAT
Pololu 6-Pin Female-Female JST SH-Style Cable 63cm Pololu #4769 This 63 cm (25″) cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor Encoders with top-entry connectors and with side-entry connectors as well as our breakout boards with top-entry and side-entry...
In stock
€ 5,25 Incl. VAT
Pololu 6-Pin Female-Female JST SH-Style Cable 16cm Pololu #4766 This 16 cm (6.3″) cable has six 28 AWG wires and 6-pin female JST SH-type connectors on both ends. These connectors work with our Micro Metal Gearmotor Encoders with top-entry connectors and with side-entry connectors as well as our breakout boards with top-entry and side-entry...
In stock
€ 3,40 Incl. VAT
PJRC WIZ820io & Micro SD Card Adaptor PJRC #WIZ820_SD_ADAPTOR This adaptor allows you to easily use gigabytes of SD card flash memory and/or a Wiznet WIZ850io or WIZ820io ethernet module with Teensy LC, 3.0, 3.1, 3.2, 3.5 and 3.6.
In stock
€ 2,45 Incl. VAT
PJRC Ethernet Kit for Teensy 4.1 PJRC #ETHERNET_KIT This kit has all the parts needed to connect to the Ethernet port on Teensy 4.1.This kit includes an Ethernet MagJack, bare circuit board, ribbon cable assembly, 2 header pins, and a capacitor. DIY soldering is required.
In stock
€ 8,65 Incl. VAT
Kitronik :MOVE Motor Klaw Kit Kitronik #5696 The :MOVE Motor Klaw provides a fun and easy to install addition to the Kitronik :MOVE Motor buggy for microbit. It has been carefully designed to have the ability to fit both vertically and horizontally with one bolt. Included are two types of Klaw attachments for each of these builds.
In stock
€ 9,20 Incl. VAT
Cytron Raspberry PI 4 Heatsink Set (3pcs) Black Cytron #HD-HS-RPI4-3B Raspberry Pi is a Single Board Computer that can run many programs and it has many applications. It too will heat up when the processor is running like any other computer motherboard and will heat up very fast during full operation or overlocked.
In stock
€ 2,60 Incl. VAT
Opencircuit Female header 20 pin - 2.54mm - 5 stuks This set of 5 female headers with 20 pins and a 2.54 mm pitch is perfect for those looking for versatile and reliable connection options for electronic projects. They are compatible with standard breadboards.
In stock
€ 2,60 Incl. VAT
Sparkfun ESP32 Thing Stackable Header Set Sparkfun #PRT-14311 Boost your Sparkfun ESP32 Thing's versatility with the Stackable Header Set. Extend functionality, connect to various shields, and reduce clutter with the unique stackable design. Includes 2x 20-pin headers.
In stock
€ 2,75 Incl. VAT
Velleman Magnetizer / demagnetizer Velleman #VTMD Velleman VTMD Magnetizer/Demagnetizer - magnetizes and demagnetizes a wide range of tools. Ideal for handling screws and other metal objects. Compact and durable, perfect for any job.
In stock
€ 3,40 Incl. VAT
Sparkfun Teensy Stackable Header Kit (Extended) Sparkfun #PRT-17152 Boost your Teensy 4.1, 3.6, or 3.5 development board's functionality with our Teensy Stackable Header Kit (Extended). Ideal for prototyping, circuit development, and promoting organized workspace. Compatible with various Teensy boards.
In stock
€ 2,90 Incl. VAT
Opencircuit Print terminal blocks 4 pole green - 2.54mm pitch - 5 pieces This set of 5 green terminal blocks with 4 connection points and a 2.54mm pitch is perfect for standard experimental boards and breadboards. They offer a strong connection with wire sizes ranging from 14 to 22 AWG.
In stock
€ 3,50 Incl. VAT
Sale
-30 %
Transcend RDF5 SD / microSD Card Reader - USB 3.1 - Wit Transcend #TS-RDF5W This (micro) SD card reader is designed to deliver high data transfer rates. The card reader has a USB 3.1 Gen 1 interface and support for both SDHC / SDXC and microSDHC / SDXC cards.
In stock
€ 11,75 € 8,25 Incl. VAT
Velleman Spare soldering tip pointed 1mm - for VTSSC50N Velleman #BITC50N2 The Vellemen BITC50N2 has a 1mm pointed tip, this soldering tip is therefore very suitable for finer soldering work. This Velleman soldering tip is suitable for the soldering iron of the Velleman VTSSC50N soldering station.
In stock
€ 2,95 Incl. VAT
DFRobot TT Geared Motor with Back Shaft (160rpm 6v L Shape) DFRobot #FIT0016 This is a TT Micro DC Geared Motor with Back Shaft working at 6V with 160rpm. The TT motor series the most popular DC motors for DIY enthusiasts. It is designed to easily incorporate the DFRobot Encoder.
In stock
€ 4,00 Incl. VAT

Viewed 50 of 1933 productsShow more

Customer reviews about Material



MarkOpencircuit Copper tape 5mm self-adhesive - 50 meters Works very well
RademakerSparkfun Copper Tape - 5mm (50ft) Great stuff
EvelynOpencircuit 25X25mm 3M Double Sided Adhesive Thermal Tape - 10pcs Sticks well and seems to dissipate heat well, time will tell.
Margriet de GraafSparkfun Copper Tape - 5mm (50ft) Quite narrow tape, but it works well for making a circuit (for making a Christmas card with LED light).