Motors

DC motoren, stepper motors, servomotors and other mechanics with motor, like (water)pumps.

Lineare motors Stepping motor Vibration motors Servo motors Solenoid motors DC motors Gearmotors Brushless Electric Motors Accessories for motors Pumps

273 results Sort by

21x25mm DC motor 17000RPM This small DC motor in 130 format has a diameter of 21mm and a length of 25mm. The motor can be controlled with a voltage between 3V and 6V, whereby the motor at 3V has a 17000 RPM. The shaft has a diameter of 2 mm and a length of 9 mm.
In stock
€ 2,60 Incl. VAT
Aluminum servo arm mounting Servo arm mounting for standard servomotors (40 × 20 × 36mm), such as the MG995 and MG996R. This disc has 4 holes for M3 nuts for mounting (included).
In stock
€ 2,30 Incl. VAT
Mini submersible pump 2.5V - 6V Small pump to move water or other liquid. This submersible pump is placed in the liquid, where a hose of 7.5 mm can be placed at the outlet can be connected to propel the water up to 1 meter.
In stock
€ 12,95 Incl. VAT
Deal
-29 %
5mm to 8mm drive shaft adapter 5mm to 8mm drive shaft adapter, which can be used to make the shaft of a motor compatible with the larger (or smaller) shafts.
In stock
€ 2,45 € 1,75 Incl. VAT
0834 Flat vibration motors - 5 pcs A set of 5 flat vibration motors. These small 8mm vibration motors give a lot of power despite their size.
In stock
€ 3,90 Incl. VAT
50 mm L stepper motor support This black steel mounting bracket fixes the usual stepper motors to your project. This bracket places the stepper motor at a 90 degree angle with a solid connection.
In stock
€ 3,15 Incl. VAT
DC Geared Motor 1:120 Small and cheap DC motor with a gearbox ratio of 1: 120. The gearbox has a reduction in speed, which gives the engine much more power. These engines are ideal for robot platforms, such as robot cars.
In stock
€ 3,00 Incl. VAT
Electric solenoid mini slot 12VDC Electric lock with a mechanism of 10 mm. When 12V is set on this switch, the lock is pulled in within 1 second. When the tension is released, the lock springs out again.
In stock
€ 5,50 Incl. VAT
12V pomp waterproof 240L/H Brushless water pump with an input voltage of 12V. This pump has a separate entrance and exit, which makes this pump suitable for watertight systems such as water cooling.
In stock
€ 9,95 Incl. VAT
Deal
-20 %
28BYJ-48 12V stepper motor 4-phase 5-wire Small but powerful stepper motor. This force can be explained by the gearbox that is mounted on it. This makes this engine specialized in power and precision. This stepper motor is controlled by means of 4 phase with 5 wires, it is even possible to switch the motor 2 phase.
In stock
€ 2,95 € 2,35 Incl. VAT
Peristaltic pump 12V This peristaltic pump is a fast and powerful pump with a different operation than the known pumps. Because this pump pushes the liquid through the hose through a peristaltic movement, the pump itself never comes into contact with the liquid.
In stock
€ 10,65 Incl. VAT
Push-pull solenoid 12V This electromagnetic (solenoid) push-pull switch works on 12V with a current of up to 1A. This solenoid contains a pin which is retracted about 10 mm when voltage is applied. The tensile force is around 600 grams. When the solenoid voltage is removed ...
In stock
€ 5,15 Incl. VAT
Electric lock around 12V Electric lock with a round mechanism of 15 mm. When 12V is set on this switch, the lock is pulled in 10 mm within 1 second. When the tension is released, the lock springs out again.
In stock
€ 12,10 Incl. VAT
DM-S0306D Servo continue rotatie 3KG This DM-S0306D servo motor can run without limit, making it suitable for many applications such as wheels, rotors and other 360 ° applications. The servo has a torque of 3 kg at 4.8 V and a speed of 0.13 sec / 60 degrees.
In stock
€ 9,30 Incl. VAT
Mini pomp 2,5V - 6V Small pump to move water or other liquid. This pump can be placed outside the liquid, whereby a hose of 7.5 mm can be connected to the inlet and outlet. Since this pump is not completely watertight, it is advisable not to place it in the liquid.
In stock
€ 3,95 Incl. VAT
FEETECH FS90R Micro Continuous Rotation Servo Pololu #2820 The FS90R is a micro-sized servo that has been built by FEETECH (formerly known as Fitec) specifically for continuous rotation. At 6 V, it has a maximum rotation speed of around 130 RPM (no-load) and can produce up to 21 oz-in (1.5 kg-cm) of torque.
In stock
€ 7,20 Incl. VAT
FEETECH High-Torque Servo FS5115M Pololu #3426 The FS5115M is a standard-size analog servo from FEETECH can deliver more than twice the torque of the other same-size servos with plastic gears thanks to its powerful motor and all-metal gear train. The output shaft is supported by two ball bearings for reduced friction.
In stock
€ 22,60 Incl. VAT
PVC Hose 6mm transparent - 2 meters - including clamp This hose has an outer diameter of 6mm and an inner diameter of 4mm. The hose is made of strong and flexible PVC with a transparent color.
In stock
€ 3,85 Incl. VAT
Solenoid slot 6V This electromagnetic (solenoid) push-pull switch works on 6V with a current of up to 1A. This solenoid contains a pin which is retracted about 10 mm when voltage is applied. The pulling force is around 1500 grams.
In stock
€ 7,95 Incl. VAT
L-Bracket 37D Metalen Gearmotors (2-Pack) Pololu #1084 These aluminum gearmotor brackets let you mount Pololu’s 37D mm metal gearmotors to your project. The brackets are sold in pairs, and each bracket includes six M3 screws for securing the motor to the bracket.
In stock
€ 10,35 Incl. VAT
FEETECH Sub-Micro Servo FS0403 Pololu #3421 The FS0403 analog sub-micro servo from FEETECH is a great tiny actuator for a small robot mechanism. Servo horns and associated hardware are included.Key specs at 6 V: 0.08 sec/60°, 10 oz-in (0.7 kg-cm), 5 g.
In stock
€ 7,80 Incl. VAT
Stepper motor bracket 42x60mm - horizontal This black steel mounting bracket fixes the usual stepper motors to your project. This bracket puts the stepper motor in a horizontal position.
In stock
€ 3,15 Incl. VAT
Pololu 20D mm Metal Gearmotor Bracket Pair Pololu #1138 These aluminum gearmotor brackets let you securely mount our 20D mm metal gearmotors. The brackets are sold in pairs, and each bracket includes two M2.5 screws for securing the motor to the bracket.
In stock
€ 8,40 Incl. VAT
Pololu Micro Metal Gearmotor Bracket Pair - Black Pololu #989 This compact bracket enables convenient mounting of popular, Sanyo-style micro metal gearmotors. The black plastic bracket encloses the otherwise exposed gears, and the mounting tabs capture the nuts for easy installation.
In stock
€ 3,55 Incl. VAT
FEETECH Continuous Rotation Servo FS5106R Pololu #3430 The FS5106R is a standard-sized servo that has been built by FEETECH specifically for continuous rotation, making it an easy way to get your robot moving. It features two ball bearings on the output shaft for reduced friction, and it offers easy access to the rest-point adjustment potentiometer.
In stock
€ 19,95 Incl. VAT
FEETECH Standard Servo FS5106B Pololu #3425 The FS5106B is a general-purpose, low-cost standard analog servo from FEETECH. Two ball bearings help reduce friction and improve performance. Servo horns and associated hardware are included.Key specs at 6 V: 0.16 sec/60°, 83 oz-in (6 kg-cm), 41 g.
In stock
€ 18,75 Incl. VAT
FEETECH Sub-Micro Servo FS0307 Pololu #3420 The FS0307 analog sub-micro servo from FEETECH is a great tiny actuator for a small robot mechanism. Servo horns and associated hardware are included.Key specs at 6 V: 0.09 sec/60°, 8 oz-in (0.6 kg-cm), 4.4 g.
In stock
€ 9,95 Incl. VAT
42x24mm Micro Motor (280) 3~12V DC This small 280 micro DC motor operates at a voltage between 3V and 12V and has a rotation speed between 1500 and 15000 rpm. The stall current of this motor is 1.8A. The shaft has a diameter of 2 mm and a length of 11 mm.
In stock
€ 2,95 Incl. VAT
Brushed DC Motor: 130-Size, 3V, 17kRPM, 4A Stall Pololu #1592 Brushed DC Motor: 130-Size, 3V, 17kRPM, 4A Stall.This high-power, 130-size brushed DC motor can be used as a direct replacement for lower-power 130-size motors to get more torque and speed out of your gearmotor, but it will also draw more current and typically wear out faster.
In stock
€ 3,40 Incl. VAT
700:1 Sub-Micro Plastic Planetary Gearmotor 6Dx21L mm Pololu #2359 This tiny, cylindrical gearmotor consists of a coreless brushed DC motor and a 700:1 plastic planetary gearbox. The entire assembly has a diameter of just 6 mm (0.24″) and an extremely light weight of 1.3 g (0.046 oz), making it a great actuator for miniature robots and very small mechanisms.
In stock
€ 20,45 Incl. VAT
Slip Ring with Flange - 22mm diameter, 6 wires, max 240V @ 2A Adafruit #736 With this 22mm diameter slip ring assembly, your electronics can now twist and turn safely. Add wheel encoders, 360 degree sensors, rotating LEDs, rotors and more!
In stock
€ 16,95 Incl. VAT
FEETECH FS90-FB Micro Servo with Position Feedback Pololu #3436 This version of the FS90 micro servo from FEETECH is specially modified to provide access to the feedback potentiometer through a fourth (green) wire, allowing you to directly measure the position of the output.
In stock
€ 11,95 Incl. VAT
Micro Metal Gearmotor to LEGO® Axle Adaptor (pack of 4) Pimoroni #PIM132 This little dingus connects our popular micro metal gearmotors to a standard LEGO® axle - ideal for making your brick creations move autonomously! Injection moulded from snazzy purple plastic they are made in the UK.
In stock
€ 5,10 Incl. VAT
Electric solenoid door lock 12VDC This beautiful door lock operates on a voltage of 12V and keeps the door closed as long as there is voltage on the lock. When the voltage is removed (for example due to a power failure), the lock opens automatically, so that no one gets trapped.
In stock
€ 29,95 Incl. VAT
Pololu 25D mm Metal Gearmotor Bracket Pair Pololu #2676 These aluminum gearmotor brackets let you securely mount Pololu’s 25D mm metal gearmotors to your project. The brackets are sold in pairs, and each bracket includes two M3 screws for securing the motor to the bracket.
In stock
€ 9,75 Incl. VAT
Solarbotics RM2 (high-power motor for GM2/3/8/9) Pololu #611 Need more power out of your gear motor? This is a high-power brushed DC motor that fits in the same form factor as used by the GM2/3/8/9 style gear motors.
In stock
€ 3,95 Incl. VAT
Reduced
-18 %
14×4.5mm Wheel Pair for Sub-Micro Plastic Planetary Gearmotors Pololu #2356 These tiny plastic wheels have rubber tires and are compatible with 2 mm diameter shafts, such as the ones on our sub-micro plastic gearmotors. The outer diameter of the wheel is 14 mm and the tire is 4.5 mm wide. These wheels are sold in pairs.
In stock
€ 3,35 € 2,75 Incl. VAT
250:1 Metal Gearmotor 20Dx46L mm 12V CB Pololu #3482 These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 12V brushed DC motor with long-life carbon brushes combined with a 250:1 metal spur gearbox.
In stock
€ 23,30 Incl. VAT
Reduced
-17 %
380:1 Micro Metal Gearmotor HP 6V Pololu #4794 This gearmotor is a miniature high-power, 6 V brushed DC motor with a 379.17:1 metal gearbox. This version has stainless steel gearbox plates instead of the standard brass ones for increased durability and resistance to wear from radial loads.
In stock
€ 24,30 € 20,05 Incl. VAT
FEETECH Sub-Micro Servo FS0403-FB with Position Feedback Pololu #3438 This version of the FS0403 sub-micro servo from FEETECH is specially modified to provide access to the feedback potentiometer through a fourth (green) wire, allowing you to directly measure the position of the output.
In stock
€ 13,65 Incl. VAT
FEETECH Mini Servo FT1117M-FB with Position Feedback Pololu #3440 This version of the FT1117M miniature servo from FEETECH is specially modified to provide access to the feedback potentiometer through a fourth (green) wire, allowing you to directly measure the position of the output.
In stock
€ 16,85 Incl. VAT
Hobby Motor - Gear Sparkfun #ROB-11696 Get Sparkfun's Hobby Motor for high-speed, low-resistance projects. Operates at 1.0-3.0VDC, handles up to 12VDC. Ideal for versatile applications. Refer to M260 datasheet for details.
In stock
€ 2,80 Incl. VAT
Reduced
-18 %
Micro Metal Gearmotor Bracket Extended pair - 2 pcs Pololu #1089 This compact bracket allows easy mounting of popular micro metal gearmotors. The white plastic bracket encloses the otherwise visible gears and with the mounting holes the bracket can be easily installed.
In stock
€ 7,30 € 6,00 Incl. VAT
Servo Extension Cable 12" Male - Female Pololu #2184 This 12-inch (300-mm), flat cable can be used to extend the leads of many common RC hobby servos. It has 22-AWG wires, and both the male and female cable ends are compatible with both JR- and Futaba-style connectors, allowing it to work in either system or as an adapter between systems.
In stock
€ 4,05 Incl. VAT
172:1 Metal Gearmotor 25Dx56L mm HP 6V Pololu #1577 This gearmotor consists of a high-power, 6 V brushed DC motor combined with a 171.79:1 metal spur gearbox. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in diameter and extends 12.5 mm from the face plate of the gearbox.
In stock
€ 36,80 Incl. VAT
DC Geared Motor 1:90 - Metal gears This is a small DC motor with a gearbox ratio of 1:90 and metal gears. The gearbox has a reduction in speed, which gives the engine much more power.
In stock
€ 5,30 Incl. VAT
Electric Solenoid Lock DFRobot #FIT0620 This is a high-quality electric solenoid lock with steel-made case and steel casting parts. It adopts solid and durable latch hook which assured a long usage life over 500 thousands times.
In stock
€ 10,30 Incl. VAT
70:1 Metal Gearmotor 37Dx54L mm 12V (Helical Pinion) Pololu #4744 This gearmotor is a powerful brushed DC motor with 70:1 metal gearbox intended for operation at 12 V. The gearbox is composed mainly of spur gears, but it features helical gears for the first stage for reduced noise and improved efficiency.
In stock
€ 26,45 Incl. VAT
MTO1804 Brushless DC Motor (CW) DFRobot #FIT0633 Designed for multi-rotor wings, this brushless DC motor is a boon for all drone enthusiasts. The brushless DC motor has the following features: capable of outputting large torques at low speeds and...
In stock
€ 72,10 Incl. VAT
Brushless DC Motor MTO1804 (CCW) DFRobot #FIT0632 Designed for multi-rotor projects, this brushless DC motor is a boon for all drone enthusiasts. The brushless DC motor has the following features: capable of outputting large torques at low speeds...
In stock
€ 41,30 Incl. VAT

Viewed 50 of 273 productsShow more

DC motoren, stepper motors, servomotors and other mechanics with motor, like (water)pumps.

Customer reviews about Motors



Lars12V 180L / H water pump with bracket Good thing and very cheap. is supper fast
Seppe28BYJ-48 5V stepper motor 4-phase 5-wire Does as expected
WouterAir pump 5V - 12V Perfect. Good quality and delivered within 1 day. I have added Opencircuit to my favourites.
John5V / 12V Waterpump 240L/H Meets expectation
Glenn van den Mini submersible pump 2.5V - 6V Works fine
Anonymous42x24mm Micro Motor (280) 3~12V DC Working completely well.
John b21x25mm DC motor 17000RPM Before
DionTowerPro SG90 9G micro servo motor - 180° Great for 1:10 model building!