Material

Material to build projects such as enclosures, protoboards, breadboards, cables and wiring.

1833 results Sort by

Load previous

GX12-2P Connector 2-Pin - male + female - built-in This plug is 12mm in circumference and has 2 channels through which signals can be sent. With the metal exterior with sealing ring, this connector is not easily damaged or 'accidentally' pulled out.
In stock
€ 1,80 Incl. VAT
Mean Well SGA12E09-P1J power supply - 9V 1,33A Mean well #SGA12E09-P1J The Mean Well SGA12E09-P1J 9V 1.33A adapter ensures safe and reliable power for your electronics with EU plug, 80% efficiency, and comprehensive protection against overload, overvoltage, and overheating.
In stock
€ 14,00 Incl. VAT
Mean Well GST25E05-P1J power supply - 5V 4A Mean well #GST25E05-P1J This AC / DC adapter can be connected directly to the powersocket with a European plug. The adapter generates 5VDC with a maximum current of 4A and an efficiency around 80%.
In stock
€ 20,35 Incl. VAT
Nitto - insulation tape - black - 19 mm x 20 m Nitto Denko #1045N-NPC This roll of black insulation tape is suitable for marking cables, fuses or a route for your line-follow robot. Unlike other tapes, insulating tape has no electrical conductivity.
In stock
€ 2,70 Incl. VAT
Nitto - insulation tape - red - 19 mm x 20 m Nitto Denko #1045N-RPC This roll of red insulation tape is suitable for marking cables, fuses or a route for your line-follow robot. Unlike other tapes, insulating tape has no electrical conductivity.
In stock
€ 2,70 Incl. VAT
Nitto - insulation tape - yellow - 19 mm x 20 m Nitto Denko #1045N-JPC This roll of yellow insulation tape is suitable for marking cables, fuses or a route for your line-follow robot. Unlike other tapes, insulating tape has no electrical conductivity.
In stock
€ 2,70 Incl. VAT
DC Geared Motor 1:90 - Metal gears This is a small DC motor with a gearbox ratio of 1:90 and metal gears. The gearbox has a reduction in speed, which gives the engine much more power.
In stock
€ 5,30 Incl. VAT
DC Geared Motor 1:48 This small DC motor has a gearbox ratio of 1:48. The gearbox has a reduction in speed, which gives the engine much more power. These motors are ideal for robotic platforms, such as robotic cars. They go well with the 65mm rubber wheel.
In stock
€ 2,75 Incl. VAT
USB micro-B to USB-C adapter (Black) Raspberry Pi #RPI-ADP-USBC-B As Raspberry Pi 4 Model B comes with USB type C for power input, this adapter will enable you to use the existing power adapter (USB micro B) to power this latest single board computer.
In stock
€ 2,40 Incl. VAT
SN-01B Crimping Tool 20-28AWG - 0.08 / 0.5mm2 This crimping pliers with 0.08 / 0.5mm bits are suitable for attaching JST, Molex / dupont terminals and connectors to a wire end of 20 to 28AWG.
In stock
€ 14,25 Incl. VAT
16GB Memory Stick, Uncased Kitronik #4115 This is a 16GB USB 2.0 Flash Drive/Memory Stick, uncased. As it is sold without the case, this 16GB memory stick is ideal for school projects can design their own, or for hobbyists looking to add their own unique touch to an every day piece of hardware. Features:Uncased for full customisation.
In stock
€ 9,25 Incl. VAT
Electric Solenoid Lock DFRobot #FIT0620 This is a high-quality electric solenoid lock with steel-made case and steel casting parts. It adopts solid and durable latch hook which assured a long usage life over 500 thousands times.
In stock
€ 9,95 Incl. VAT
Magnet Compartment Parts Box DFRobot #FIT0402 This is a nice parts box for tiny electronic components such as capacitors, resistors and connectors. You can keep all of them well arranged in this non-toxic lightweight parts box. The surface is also non-skid treated to make it handy to grip.
In stock
€ 1,65 Incl. VAT
Semi Flexible Monocrystalline Solar Panel (6V 1A) DFRobot #FIT0600 Tap into renewable energy with this waterproof, A-class monocrystalline solar panel. Efficient, lightweight, and easy to attach to backpacks, it ensures reliable power supply even in the rain.
In stock
€ 26,30 Incl. VAT
SONOFF Micro - 5V Wireless USB Smart Adaptor Itead #M0802010006 Did you miss any device out when your list of smart home devices continues to grow? For example, USB small devices like LED light strip, USB desktop fan, USB desktop lamp, USB water pump and more.
In stock
€ 6,90 Incl. VAT
9.7:1 Metal Gearmotor 25Dx48L mm HP 12V Pololu #3202 This gearmotor consists of a high-power, 12 V brushed DC motor combined with a 9.68:1 metal spur gearbox. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in diameter and extends 12.5 mm from the face plate of the gearbox.
In stock
€ 36,80 Incl. VAT
Mini HDMI cable Raspberry Pi #RPI-037 The officially-branded Raspberry Pi mini-HDMI to HDMI cable, perfect for your Pi Zero or Zero W. Specifications1m lengthCompatible with Raspberry Pi Zero and Zero WFully triple-shielded for increased noise immunity
In stock
€ 4,15 Incl. VAT
Break-away 0.1" 36-pin strip male header - Black - 10 pack Adafruit #392 Breakaway header is like the duct tape of electronics. Its great for connecting things together, soldering to perf-boards, fits into any breakout or breadboard, etc. We go through these guys real fast, and thought that given how handy they are, we'd offer them in a pack of ten!
In stock
€ 5,25 Incl. VAT
Break-away 0.1" 36-pin strip male header - Rainbow Combo 10 Pack Adafruit #4154 In this world nothing can be said to be certain, except we need headers, headers, and more headers!Each pack contains ten candy-colored 36-pin 0.1" pitch break-away male headers.
In stock
€ 5,25 Incl. VAT
12mm Hex Wheel Adapter for 3mm Shaft (2-Pack) Pololu #2682 These 17 mm long aluminum adapters convert a 3 mm diameter shaft to a 12 mm hex shaft that is compatible with many common hobby RC wheels.
In stock
€ 8,40 Incl. VAT
12mm Hex Wheel Adapter for 6mm Shaft, Extended (2-Pack) Pololu #2687 These 35 mm long aluminum adapters convert a 6 mm diameter shaft to a 12 mm hex shaft that is compatible with many common hobby RC wheels.
In stock
€ 8,20 Incl. VAT
Nylon Spacer: 4mm Length, 4mm OD, 2.7mm ID (50-Pack) Pololu #1971 Keep your components separated with this 50-pack of 4mm-long (0.16") nylon spacers. These spacers have an outer diameter (OD) of 4 mm (0.16") and an inner diameter (ID) of 2.7 mm (0.11"), and they work with #2 and M2 screws.
In stock
€ 2,55 Incl. VAT
Nylon Spacer: 6mm Length, 4mm OD, 2.7mm ID (50-Pack) Pololu #1972 Keep your components separated with this 50-pack of 6mm-long (0.24") nylon spacers. These spacers have an outer diameter (OD) of 4 mm (0.16") and an inner diameter (ID) of 2.7 mm (0.11"), and they work with #2 and M2 screws.
In stock
€ 3,10 Incl. VAT
Nylon Spacer: 10mm Length, 4mm OD, 2.7mm ID (25-Pack) Pololu #1974 Keep your components separated with this 25-pack of 10mm-long (0.39") nylon spacers. These spacers have an outer diameter (OD) of 4 mm (0.16") and an inner diameter (ID) of 2.7 mm (0.11"), and they work with #2 and M2 screws.
In stock
€ 2,55 Incl. VAT
Nylon Spacer: 12mm Length, 4mm OD, 2.7mm ID (25-Pack) Pololu #1975 Keep your components separated with this 25-pack of 12mm-long (0.47") nylon spacers. These spacers have an outer diameter (OD) of 4 mm (0.16") and an inner diameter (ID) of 2.7 mm (0.11"), and they work with #2 and M2 screws.
In stock
€ 2,55 Incl. VAT
Nylon Spacer: 22mm Length, 4mm OD, 2.7mm ID (10-Pack) Pololu #1978 Keep your components separated with this 10-pack of 22mm-long (7/8") nylon spacers. These spacers have an outer diameter (OD) of 4 mm (0.16") and an inner diameter (ID) of 2.7 mm (0.11"), and they work with #2 and M2 screws.
In stock
€ 2,35 Incl. VAT
Nylon Spacer: 25mm Length, 4mm OD, 2.7mm ID (10-Pack) Pololu #1979 Keep your components separated with this 10-pack of 25mm-long (0.98") nylon spacers. These spacers have an outer diameter (OD) of 4 mm (0.16") and an inner diameter (ID) of 2.7 mm (0.11"), and they work with #2 and M2 screws.
In stock
€ 2,50 Incl. VAT
Magnetic Encoder Pair Kit with Side-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18V Pololu #4761 Magnetic Encoder Pair Kit with Side-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18V. Add quadrature encoders to your micro metal gearmotors (extended back shaft version required) with this kit that uses a magnetic disc and hall effect sensors to provide 12 counts per revolution of the...
In stock
€ 10,55 Incl. VAT
Magnetic Encoder Pair Kit with Top-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18V Pololu #4760 Magnetic Encoder Pair Kit with Top-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18V. Add quadrature encoders to your micro metal gearmotors (extended back shaft version required) with this kit that uses a magnetic disc and hall effect sensors to provide 12 counts per revolution of the...
In stock
€ 13,45 Incl. VAT
USB DIY Slim Connector Shell - MicroB Plug Adafruit #1826 Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. This is the 'slim' version of the DIY MicroB Male connector.
In stock
€ 1,60 Incl. VAT
USB DIY Slim Connector Shell - A-M Plug Adafruit #1827 Make your own USB connections without slicing apart a USB cable and soldering those thin wires inside. This is the 'slim' version of the DIY USB-A Male connector.
In stock
€ 1,60 Incl. VAT
2x AAA Battery Box with Switch and JST Connector Kitronik #2225 This 2 x AAA Battery box features a slide and click cover, built in on/off switch the 150mm leads terminate in a JST connector.
In stock
€ 2,15 Incl. VAT
Solar Power Manager 5V DFRobot #DFR0559 The DFRobot Solar Power Manager series are designed for IoT projects and renewable energy projects, providing safe and high-efficiency embedded solar power management modules for makers and application engineers.
In stock
€ 9,50 Incl. VAT
Solar Power Manager Micro (2V 160mA Solar Panel Included) DFRobot #DFR0579 Solar Power Manager Micro is a micro power, high-efficiency solar power management module, designed for powering IoT based low-power wireless sensors or controllers with 1V~3V small size solar panels.
In stock
€ 19,50 Incl. VAT
USB 3.1 Cable A to C - (3 Foot/0.91 meter) Sparkfun #CAB-14743 Upgrade to the Sparkfun USB 3.1 Cable A to C - 3 Foot (~1 meter) for high-speed data transfers and efficient charging. Reliable, robust and ideal for laptop users. Superior performance in a convenient length.
In stock
€ 8,25 Incl. VAT
Reversible USB A to C Cable - 0.3m Sparkfun #CAB-15426 Discover the Sparkfun Reversible USB A to C Cable. Measuring 0.3m, it's perfect for USB 2.0 connections and supports speeds and charging up to 2A. Ideal for smaller applications.
In stock
€ 7,35 Incl. VAT
MTO1804 Brushless DC Motor (CW) DFRobot #FIT0633 Designed for multi-rotor wings, this brushless DC motor is a boon for all drone enthusiasts. The brushless DC motor has the following features: capable of outputting large torques at low speeds and...
In stock
€ 33,05 Incl. VAT
Brushless DC Motor MTO1804 (CCW) DFRobot #FIT0632 Designed for multi-rotor projects, this brushless DC motor is a boon for all drone enthusiasts. The brushless DC motor has the following features: capable of outputting large torques at low speeds...
In stock
€ 33,05 Incl. VAT
GY-370 DC high torque motor - DC24V 30RPM - with square gearbox Metal gearmotor with worm gear transmission. The motor has a speed of 30 RPM and can be powered by 24V.
In stock
€ 11,05 Incl. VAT
1xAA battery Cage with Leads Kitronik #2231-01 This battery cage houses a single AA battery and is barely bigger than the battery it is designed to hold.
In stock
€ 1,25 Incl. VAT
24V High Torque motor - 10RPM - 75KG - with Square Gearbox Metal gearmotor with wormwheel driver. The motor has a speed of 10RPM and can be powered by 24V. The motor has a really hight torque power of 75kg.cm.
In stock
€ 28,50 Incl. VAT
CR1220 button cell battery 3V - 35mAh - 5 pieces Camelion #CR1220C CR1220 button cell battery 3V - 35mAh - 5 pieces Specifications Nom. voltage: 3.0V Typ. Capacity: 35mAhIEC: CR1220Dimensions: 12.5 x 2.0mmPacking: 5 pieces in blister
In stock
€ 10,00 Incl. VAT
USB Female Type C Connector Sparkfun #COM-15111 Upgrade your electronics with Sparkfun's 16-pin USB Female Type C Connector. Designed for easy insertion and reliable connection, it's perfect for smartphones, laptops, and DIY projects. Requires PTH and SMD soldering.
In stock
€ 4,65 Incl. VAT
Multicolor Buttons - 4-pack Sparkfun #PRT-14460 Get Sparkfun's Multicolor Buttons - 4-pack for your projects. This versatile set includes red, blue, yellow, and green buttons with a unique, durable design. Perfect for custom game controllers, interactive installations, and prototypes.
In stock
€ 2,50 Incl. VAT
Screws, nuts, spacers and washers set including storage box Whadda #WCS400 This Velleman screw, nut, standoff, and washer set is perfect for mounting your electronic projects. The set includes nylon and brass parts in different sizes, nickel-plated brass screws and nuts, nickel-plated brass M3 size washers, and comes in a sturdy plastic storage box.
In stock
€ 13,00 Incl. VAT
SparkFun USB-C Breakout Sparkfun #BOB-15100 Maximize your project's power with the SparkFun USB-C Breakout. This compact, versatile board simplifies design and assembly, providing a powerful, reversible USB connection. Ideal for hardware design and device power solutions.
In stock
€ 9,00 Incl. VAT
Cable Cover and Management Sleeve 16mm 1 meter Cytron #WR-CC-16MM Cable Cover and Management Sleeve 16mm 1 meter ease you to keep your electronics cable or wires to be more tidied,managed and protected.
In stock
€ 2,35 Incl. VAT
Nichrome 80 Round Wire 0.5mm - 24 AWG - 5.55Ω - 7.5 meter Cr20Ni80 is usually used for high temperature furnaces in the heat treating, ceramics, glass, steel, and electronic industries.SpecificationsMaterial: Nichrome (Cr20Ni80)Main Color: Silver Tone.OD:0.5mmLength:7.5m
In stock
€ 4,45 Incl. VAT
3V-5V 0.2A Cooling Fan for RPi with Screws Cytron #FAN-0305-3008 This cooling fan with two wire connector interface for dual speed mode (3.3V and 5V DC) suitable for Raspberry Pi boards. Or if you want an enclosure for your Raspberry Pi 4, you can get those high demand RPi 4 Alminium Heatsink Case and Rpi 4 Acrylic Case at our store. Both of them have fan.
In stock
€ 4,05 Incl. VAT
Connector set for low voltage applications - including storage box Velleman #VCS200 Assemble your own connectors with the Velleman Connectors Set for Low-Voltage Applications. Includes a variety of connectors, heat shrink tubes, and a handy storage box.
In stock
€ 17,65 Incl. VAT

Viewed 50 of 1833 productsShow more

Customer reviews about Material



MarkCopper tape 5mm self-adhesive - 50 meters Works very well
RademakerCopper Tape - 5mm (50ft) Great stuff
Margriet de GraafCopper Tape - 5mm (50ft) Quite narrow tape, but it works well for making a circuit (for making a Christmas card with LED light).
Evelyn25X25mm 3M Double Sided Adhesive Thermal Tape - 10pcs Sticks well and seems to dissipate heat well, time will tell.