Material

Material to build projects such as enclosures, protoboards, breadboards, cables and wiring.

1738 results Sort by

Load previous

Kitronik :MOVE Motor Klaw Kit Kitronik #5696 The :MOVE Motor Klaw provides a fun and easy to install addition to the Kitronik :MOVE Motor buggy for microbit. It has been carefully designed to have the ability to fit both vertically and horizontally with one bolt. Included are two types of Klaw attachments for each of these builds.
In stock
€ 10,40 Incl. VAT
9g 180° Micro Servo (1.6kg) DFRobot #SER0006 Do you need a servo for a tiny little project? Or are you seeking for an affordable solution? This mini servo is quite impressive, it does quite the job for a large range of tasks. Only weights 9 grams and gives you a 1.6kg cm torque. Pretty strong regarding its size.
In stock
€ 5,50 Incl. VAT
Pure Copper Heatsink Pack x 5 DFRobot #FIT0506 This high quality, low profile, pure copper heatsink is a perfect solution for cooling off small surface-mount components such as stepper motor drivers, SOCs or a LattePanda. The pure copper increases heat dissipation and transfer to keep your device running cooler in warm environments.
In stock
€ 5,90 Incl. VAT
Raspberry PI 4 Heatsink Set (3pcs) Black Cytron #HD-HS-RPI4-3B Raspberry Pi is a Single Board Computer that can run many programs and it has many applications. It too will heat up when the processor is running like any other computer motherboard and will heat up very fast during full operation or overlocked.
In stock
€ 2,60 Incl. VAT
ESP32 Thing Stackable Header Set Sparkfun #PRT-14311 Boost your Sparkfun ESP32 Thing's versatility with the Stackable Header Set. Extend functionality, connect to various shields, and reduce clutter with the unique stackable design. Includes 2x 20-pin headers.
In stock
€ 2,40 Incl. VAT
Set of 2 insulated screwdrivers + voltage tester - 3 stuks totaal Toolland #HSET22 This screwdriver set contains the 3 most important screwdrivers for your toolbox. The set contains 2 insulated screwdrivers (- and +) and a voltage tester.
In stock
€ 7,20 Incl. VAT
Magnetizer / demagnetizer Velleman #VTMD Velleman VTMD Magnetizer/Demagnetizer - magnetizes and demagnetizes a wide range of tools. Ideal for handling screws and other metal objects. Compact and durable, perfect for any job.
In stock
€ 3,40 Incl. VAT
Teensy Stackable Header Kit (Extended) Sparkfun #PRT-17152 Boost your Teensy 4.1, 3.6, or 3.5 development board's functionality with our Teensy Stackable Header Kit (Extended). Ideal for prototyping, circuit development, and promoting organized workspace. Compatible with various Teensy boards.
In stock
€ 3,50 Incl. VAT
Sale
-30 %
Transcend 64GB microSD Premium 400x Class 10 UHS-I + Adapter - 60MB/s Transcend #TS64GUSDU1 This is one of the best performing MicroSDHC cards (Class 10 U1) with 64GB memory. The microSD card comes with an SD card adapter.All microSDHC cards have passed a full compatibility and reliability test.
In stock
€ 14,70 € 10,30 Incl. VAT
Sale
-30 %
Transcend 16GB microSD High-Endurance - 20MB/s Transcend #TS16GUSDHC10V This durable microSDXC / SDHC card with 16GB memory from Transcend is aimed at automotive video recorders, security cameras and surveillance systems.
In stock
€ 16,70 € 11,70 Incl. VAT
Sale
-30 %
Transcend RDF5 SD / microSD Card Reader - USB 3.1 - Wit Transcend #TS-RDF5W This (micro) SD card reader is designed to deliver high data transfer rates. The card reader has a USB 3.1 Gen 1 interface and support for both SDHC / SDXC and microSDHC / SDXC cards.
In stock
€ 11,75 € 8,25 Incl. VAT
Spare soldering tip pointed 1mm - for VTSSC50N Velleman #BITC50N2 The Vellemen BITC50N2 has a 1mm pointed tip, this soldering tip is therefore very suitable for finer soldering work. This Velleman soldering tip is suitable for the soldering iron of the Velleman VTSSC50N soldering station.
In stock
€ 2,95 Incl. VAT
Gravity: TT Motor Encoders Kit DFRobot #SEN0038 This encoders kit are designed for TT motors. It provides the rotation degree of the wheels. Encoder uses non-contact method to convert the angular displacement signals. Best fit with Micro DC Geared Motor.It includes encoders, plastic tube, paper-mediated gasket etc.
In stock
€ 15,65 Incl. VAT
TT Geared Motor with Back Shaft (160rpm 6v L Shape) DFRobot #FIT0016 This is a TT Micro DC Geared Motor with Back Shaft working at 6V with 160rpm. The TT motor series the most popular DC motors for DIY enthusiasts. It is designed to easily incorporate the DFRobot Encoder.
In stock
€ 4,25 Incl. VAT
Eurocard 1 hole per island - 100x80mm - FR4 Velleman #ECS1/2 This 100mm x 80mm printed circuit board has separate islands which are not connected, which gives the freedom to make any circuit.
In stock
€ 5,70 Incl. VAT
Eurocard full line cartridge - 100x80mm - FR4 Velleman #ECL1/2 This 100mm x 80mm printed circuit board has full lines running the length of the PCB Eurocard is a European standard format for printed circuit boards (PCB) cards that can be plugged together in a standard chassis which in turn can be mounted in a 19 inch rack .
In stock
€ 6,05 Incl. VAT
Eurocard 3 holes per island - 100x160mm - FR4 Velleman #ECS3 This 160mm x 100mm printed circuit board has islands which are connected per 3, making it easier to make connections and less wire / solder is needed than with separate islands.
In stock
€ 8,95 Incl. VAT
Eurocard 2 holes per island - 100x160mm - FR4 Velleman #ECS2 This 160mm x 100mm PCB has islands which are connected per 2, making it easier to make connections and less wire / solder is needed than with separate islands.
In stock
€ 7,20 Incl. VAT
Eurocard IC patroon - 100x160mm - FR4 Velleman #ECI This 160mm x 100mm PCB has islands in an IC pattern, making it very easy to make circuits with many ICs.
In stock
€ 8,25 Incl. VAT
Eurocard 1 hole per island - 100x160mm - FR4 Velleman #ECS1 This 160mm x 100mm PCB has separate islands which are not connected, which gives the freedom to make whatever circuit you want.
In stock
€ 8,95 Incl. VAT
Eurocard full line cartridge - 100x160mm - FR4 Velleman #ECL This 160mm x 100mm printed circuit board has solid lines running the length of the PCB Eurocard is a European standard format for printed circuit boards (PCB) cards that can be plugged together in a standard chassis which in turn can be mounted in a 19 inch rack .
In stock
€ 15,00 Incl. VAT
Thermo-electric pellet coil module 6A 15.4V 67 ° Velleman #PELTIER2 This peltier module has a maximum current of 6A with a voltage of 15.4V. Thermoelectric Peltier modules use electricity to create a temperature difference between the two ceramic sides.
In stock
€ 12,10 Incl. VAT
Thermo-electric pellet coil module 3A 15.4V 65 ° Velleman #PELTIER1 Thermoelectric Peltier modules use electricity to create a temperature difference between the two ceramic sides. One side gets cold and the other gets hot when powered.
In stock
€ 12,75 Incl. VAT
Flexible Qwiic Cable - 500mm Sparkfun #PRT-17257 Maximize your prototyping with the 500mm Sparkfun Flexible Qwiic Cable. Ideal for interconnecting Qwiic enabled components with its 4-conductor, 1mm JST termination. User-friendly color-coding system and flexible design for tight spaces.
In stock
€ 4,00 Incl. VAT
Flexible Qwiic Cable - Female Jumper (4-pin) Sparkfun #CAB-17261 Sparkfun's Flexible Qwiic Cable - Female Jumper (4-pin) is a versatile adapter for easy, error-free electronic connections. Ideal for connecting Qwiic components to male pins, this highly flexible cable is also perfect for attaching a logic analyzer to your I2C system.
In stock
€ 2,95 Incl. VAT
Flexible Qwiic Cable - 100mm Sparkfun #PRT-17259 Get the versatile Sparkfun Flexible Qwiic Cable, a 100mm long, 4-conductor cable with color-coded wires for easy setup. Ideal for connecting Qwiic enabled components, it's flexible, compact, and perfect for tight spaces.
In stock
€ 2,70 Incl. VAT
Flexible Qwiic Cable - 200mm Sparkfun #PRT-17258 SparkFun's Flexible Qwiic Cable - 200mm is a 4-conductor, 1mm JST termination cable ideal for connecting Qwiic-enabled components. Its highly flexible material and color-coded wires ensure easy identification and superior use in tight spaces.
In stock
€ 2,90 Incl. VAT
Battery charger module for lithium batteries 1A - 2 pcs Velleman #WPM321 Based on TP4056, the VMA321 is a complete linear constant current / constant voltage charger for lithium ion single cell batteries.
In stock
€ 5,95 Incl. VAT
Gravity: Vibration Motor Module For Arduino DFRobot #DFR0440 Have you ever wondered how to implement a vibration motor in your project, like you would find in a mobile phone?
In stock
€ 4,25 Incl. VAT
Reduced
-47 %
Gravity: Digital Crash Sensor (Right) DFRobot #SEN0138-R A miniature snap-action switch (right lever), also trademarked and frequently known as a micro switch, is an electric switch that is actuated by very little physical force.
In stock
€ 4,85 € 2,55 Incl. VAT
Reduced
-47 %
Gravity: Digital Crash Sensor (Left) DFRobot #SEN0138-L A miniature snap-action switch (left lever), also trademarked and frequently known as a micro switch, is an electric switch that is actuated by very little physical force.
In stock
€ 4,85 € 2,55 Incl. VAT
Start-stop timer (1s - 60h) Whadda #WMT141 This timer has a wide time range from 1s to 60 hours and uses an animated indication.
In stock
€ 19,95 Incl. VAT
Velleman Soldering tin - 1mm - rasin core - 250g Velleman #SOLD250G This solder wire with 60% Sn and 40% Pb comes on a handy spool of 250 grams and is perfect for both small and larger projects. With a melting point of 185°C and a rosin core for smoother soldering, this is the ideal tool for serious soldering jobs.
In stock
€ 24,95 Incl. VAT
Kitronik White USB Lamp Kit Kitronik #2132 Build a computer desk lamp or ornament using this simple board. This kit is in a white version. The board takes power from a USB port and the light can be turned on / off with the on board switch.Features:White LED USB Lamp Kit.
In stock
€ 3,90 Incl. VAT
Electro-Fashion, Push Button Switch Kitronik #2708 This sewable push switch from Kitronik can be used to activate your e-textiles project whilst it is pressed down (the circuit is broken as soon as pressure on the switch is released). It has two connection points to which the conductive thread is connected.
In stock
€ 1,65 Incl. VAT
Electro-Fashion, Slide Switch Kitronik #2709 This sewable two position miniature slide switch from Kitronik allows LEDs to be turned on or off in your e-textiles projects. It has two connection points to which the conductive thread is connected.
In stock
€ 1,75 Incl. VAT
Electro-Fashion, Latching Switch Coin Cell Holder Kitronik #2752 Electro-Fashion, Latching Switch Coin Cell Holder. Includes a 3V coin cell battery holder and latching switch on the same PCB. This provides power and switch capabilities to an e-textiles project on the same board.
In stock
€ 3,50 Incl. VAT
Sale

Electro-Fashion Starter Pack, Standard Cell Holder Kitronik #2729 This pack is a great way to get started with E-Textiles.We have selected a number of products from our Electro-Fashion range, including three of our ultra-slim LEDs and two seperate power boards.
In stock
€ 12,70 Incl. VAT
Electro-Fashion, Light Sensing Coin Cell Holder Kitronik #2721 This board allows LEDs to be turned on automatically when it is dark. On one side of the board is the coin cell holder, which takes a CR2032 coin cell as well as a small on-off slide switch. On the other side of the board is the light sensor.
In stock
€ 4,90 Incl. VAT
Electro-Fashion, Latching Switch Kitronik #2753 Introducing the Electro-Fashion, Latching Switch: easily turn your e-textiles projects on and off with the click of a button! The switch latches meaning you press once to turn the power on, and again to turn the power off.
In stock
€ 3,40 Incl. VAT
Kitronik Solderless TT Motor Adapter Board Kitronik #2594 The solderless TT motor adapter board is probably the best way of adding a TT motor to a project. Hands up if you've ever partially melted a motor or destroyed a lug whilst trying to solder wires to one? /raises hand... Not anymore!
In stock
€ 1,90 Incl. VAT
Female-Female 2.54 to 2.0mm ribbon cable - 20cm - 40 pieces These jumper wires have a twist! Instead of going from 0.1 "/ 2.54mm pitch headers to breadboard or something, these are 2.54mm to 2.0mm!
In stock
€ 3,35 Incl. VAT
Raspberry Pi 4 power supply - USB-C, 5.1V, 3A - EU Plug - Black Raspberry Pi #SC0213-Black The Raspberry Pi 4 USB-C Power Supply in black is designed for stable and efficient power supply to your Raspberry Pi 4. Easy to connect and reliable.
In stock
€ 9,95 Incl. VAT
Button with led - Red - momentary - metal 16mm Metal button with a mounting diameter of 16mm. This button has a red LED illuminated ring, which works on 12V via a separate circuit. In addition to the 2 LED connections, this button has 3 contact points, NO, Common and NC.
In stock
€ 5,20 Incl. VAT
Button with led - White - momentary - metal 16mm Metal button with a mounting diameter of 16mm. This button has a white LED illuminated ring, which works on 12V via a separate circuit. In addition to the 2 LED connections, this button has 3 contact points, NO, Common and NC.
In stock
€ 5,20 Incl. VAT
Button with LED - Green - locking - metal 16mm Metal button with a mounting diameter of 16mm. This button has a green LED illuminated ring, which works on 12V via a separate circuit. In addition to the 2 LED connections, this button has 3 contact points, NO, Common and NC.
In stock
€ 4,90 Incl. VAT
Button with LED - Red - locking - metal 16mm Metal button with a mounting diameter of 16mm. This button has a red LED illuminated ring, which works on 12V via a separate circuit. In addition to the 2 LED connections, this button has 3 contact points, NO, Common and NC.
In stock
€ 4,50 Incl. VAT
Button with led - White - locking - metal 16mm Metal button with a mounting diameter of 16mm. This button has a white LED illuminated ring, which works on 12V via a separate circuit. In addition to the 2 LED connections, this button has 3 contact points, NO, Common and NC.
In stock
€ 4,80 Incl. VAT
Ferrite clamp 3.5mm suppression filter Ferrite suppression filter with clamp mechanism for clamping on a (data) cable of maximum 3.5 mm. The filter ensures that the device receives less interference from external sources, such as wireless transmitters.
In stock
€ 2,20 Incl. VAT
Ferrite clamp 5mm suppression filter Ferrite suppression filter with clamp mechanism for clamping on a (data) cable of maximum 5mm. The filter ensures that the device receives less interference from external sources, such as wireless transmitters.
In stock
€ 1,80 Incl. VAT

Viewed 50 of 1738 productsShow more

Customer reviews about Material



RademakerCopper Tape - 5mm (50ft) Great stuff
Margriet de GraafCopper Tape - 5mm (50ft) Quite narrow tape, but it works well for making a circuit (for making a Christmas card with LED light).
MarkCopper tape 5mm self-adhesive - 50 meters Works very well
Evelyn25X25mm 3M Double Sided Adhesive Thermal Tape - 10pcs Sticks well and seems to dissipate heat well, time will tell.