We're open! Orders will be shipped today until around 2:00 PM. Merry Christmas Eve!
Qwiic Modules
In / output modules with a qwicc connector such as buttons, relays, diplays, MP3 players and actuators. Qwiic Modules Qwiic HATs, Shields, en Carrier Boards Qwiic Development Boards Qwiic Kits Qwiic sensors Qwiic compatible Qwiic wiring
100 results Sort by
- SparkFun High Precision Temperature Sensor - TMP117 (Qwiic) Sparkfun #SEN-15805 Get precise temperature readings with the SparkFun Qwiic TMP117 breakout. This high-precision sensor features an I2C interface, programmable temperature limits, and digital offset. Easy to connect and power-efficient, it's perfect for your system.Delivered in 5 to 10 days€ 21,00 Incl. VAT
- SparkFun Air Quality Sensor - SGP40 (Qwiic) Sparkfun #SEN-18345 Improve indoor air quality with the SparkFun SGP40 Air Quality Sensor. This robust device uses Sensirion's CMOSens® technology to provide a humidity-compensated VOC signal for accurate air quality measurement. With I²C interface and Qwiic connectors, it's easy to integrate with other devices.Delivered in 5 to 10 days€ 24,15 Incl. VAT
- SparkFun Humidity Sensor Breakout - SHTC3 (Qwiic) Sparkfun #SEN-16467 The SparkFun SHTC3 Humidity Sensor is a precise, cost-effective digital sensor for monitoring greenhouse climates, setting up humidor control systems, or weather station projects. It features I2C communication and Qwiic connectors for easy integration.Delivered in 5 to 10 days€ 16,25 Incl. VAT
- SparkFun Qwiic Thermocouple Amplifier - MCP9600 (PCC Connector) Sparkfun #SEN-16294 The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system. Inside the chip are two temperature sensors, one for the thermocouple itself (the hot junction) and one for the chip itself (the cold junction).Delivered in 5 to 10 days€ 49,50 Incl. VAT
- SparkFun Digital Temperature Sensor Breakout - TMP102 Sparkfun #SEN-13314 Get precise temperature readings with SparkFun's TMP102 Digital Temperature Sensor Breakout. Ideal for Arduino projects, it uses I²C communication for easy integration and supports up to four sensors for multi-point temperature reading.Delivered in 5 to 10 days€ 7,50 Incl. VAT
- SparkFun Pulse Oximeter and Heart Rate Sensor - MAX30101 & MAX32664 (Qwiic) Sparkfun #SEN-15219 The SparkFun Pulse Oximeter and Heart Rate Sensor is an I2C based biometric sensor, utilizing two chips from Maxim Integrated: the MAX32664 Biometric Sensor Hub and the MAX30101 Pulse Oximetry and Heart Rate Module.Delivered in 5 to 10 days€ 60,25 Incl. VAT
- SparkFun Capacitive Touch Slider - CAP1203 (Qwiic) Sparkfun #SEN-15344 Add a touch of innovation to your projects with the SparkFun Capacitive Touch Slider. With built-in touch pads, customizable sensitivity, and Qwiic compatibility, this product offers an engaging and unique user experience. No soldering required.Delivered in 5 to 10 days€ 10,00 Incl. VAT
- SparkFun LTE CAT M1/NB-IoT Shield - SARA-R4 Sparkfun #CEL-14997 Boost your Arduino's capabilities with the SparkFun LTE CAT M1/NB-IoT Shield. Offering global data networks access, this shield provides high-bandwidth cellular functionality for IoT projects. Features u-blox SARA-R410M-02B LTE Cat M1/NB-IoT modem and Molex 1462000001 SMD antenna.Delivered in 5 to 10 days€ 112,25 Incl. VAT
- SparkFun Qwiic Shield for Thing Plus Sparkfun #DEV-16790 "Maximize your Qwiic ecosystem with the SparkFun Qwiic Shield for Thing Plus. Compatible with Thing Plus or Feather boards and Arduino, it supports easy daisy chaining and reduces errors. Includes 4 Qwiic connectors, I²C Jumper, and GND Buses."Delivered in 5 to 10 days€ 6,50 Incl. VAT
- SparkFun Qwiic Shield for Teensy - Extended Sparkfun #DEV-17156 Explore the Qwiic ecosystem with the SparkFun Extended Qwiic Shield for Teensy. Designed for Teensy 4.1, 3.6, and 3.5 boards, it allows easy daisy chaining of Qwiic devices. Features a "PROG" button and I2C Jumper.Delivered in 5 to 10 days€ 3,00 Incl. VAT
- SparkFun MicroMod Asset Tracker Carrier Board Sparkfun #DEV-17272 Track, monitor and secure your assets with the SparkFun MicroMod Asset Tracker Carrier Board. Features u-blox SARA-R510M8S module for secure cloud LTE-M and NB-IoT data communication, integrated GNSS receiver, IMU for movement detection, and a digital microphone.Delivered in 5 to 10 days€ 190,75 Incl. VAT
- SparkFun moto:bit - micro:bit Carrier Board (Qwiic) Sparkfun #DEV-15713 SparkFun moto:bit - micro:bit Carrier Board (Qwiic) is a user-friendly robotics controller. Easily connect to servos, sensors, and circuits for a complete robotics platform. Ideal for coding, customizing, and controlling your micro:bit. Note: micro:bit not included.Delivered in 5 to 10 days€ 35,25 Incl. VAT
- SparkFun weather:bit - micro:bit Carrier Board (Qwiic) Sparkfun #DEV-15837 Get accurate weather data with SparkFun weather:bit, a carrier board designed for micro:bit. Features built-in sensors for temperature, humidity, pressure, and optional sensors for wind, rainfall, soil conditions. Easy micro:bit integration via edge connector.Delivered in 5 to 10 days€ 22,25 Incl. VAT
- SparkFun MicroMod Data Logging Carrier Board Sparkfun #DEV-16829 Versatile SparkFun MicroMod Data Logging Board offers a flexible, low-power data collection system. Features include a microSD socket, USB-C Connector, RTC Backup Battery, and Independent 3.3V regulators. Ideal for various projects.Delivered in 5 to 10 days€ 28,50 Incl. VAT
- SparkFun MicroMod ATP Carrier Board Sparkfun #DEV-16885 Explore the MicroMod ecosystem with the robust SparkFun MicroMod ATP Carrier Board. Features M.2 connector, USB-C, Qwiic-enabled I2C ports, and a backup battery for RTC. Perfect for applications requiring abundant GPIO.Delivered in 5 to 10 days€ 25,50 Incl. VAT
- SparkFun controller:bit - micro:bit Carrier Board (Qwiic) Sparkfun #DEV-16129 Transform your micro:bit into a fully functional controller system with the SparkFun controller:bit. Designed like a classic Nintendo controller, this versatile board is perfect for coding, creating robots, and controlling games. Note: micro:bit sold separately.Delivered in 5 to 10 days€ 16,60 Incl. VAT
- SparkFun MicroMod Machine Learning Carrier Board Sparkfun #DEV-16400 The MicroMod Machine Learning Carrier Board combines some of the features of our SparkFun Edge Board and SparkFun Artemis boards, but allows you the freedom to explore with any processor in the MicroMod lineup without the need for a central computer or web connection.Delivered in 5 to 10 days€ 28,50 Incl. VAT
- SparkFun MicroMod Input and Display Carrier Board Sparkfun #DEV-16985 Enhance your MicroMod projects with the SparkFun MicroMod Input and Display Carrier Board. Ideal for embedded games or data display, it features a 6.1cm TFT display, 6 LEDs, voltage regulator, microSD slot, and more. Easy to swap processors on the fly.Delivered in 5 to 10 days€ 76,00 Incl. VAT
- SparkFun RedBoard Artemis Nano Sparkfun #DEV-15443 We like to joke the Artemis Nano is a party on the front and business on the back. And that's by design! All the important LEDs, connectors, labels, and buttons are presented on the front for the best user experience with all the supporting circuitry on the rear of the board.Delivered in 5 to 10 days€ 24,75 Incl. VAT
- SparkFun Thing Plus - Artemis Sparkfun #WRL-15574 The SparkFun Artemis Thing Plus is a versatile development board with a Thing Plus footprint and Artemis module. Compatible with Arduino and featuring a USB-C connector for easy programming. It's equipped with 1MB flash, 384k RAM, and a built-in Bluetooth. Ideal for IoT projects.Delivered in 5 to 10 days€ 32,25 Incl. VAT
- SparkFun OpenLog Artemis Sparkfun #DEV-16832 "Maximize your project's data capture with the SparkFun OpenLog Artemis. This powerful, open-source data logger automatically logs data from a variety of sensors, including IMU, GPS, and Qwiic. Features built-in IMU, on-board RTC, and supports microSD cards up to 32GB."Delivered in 5 to 10 days€ 74,00 Incl. VAT
- SparkFun RedBoard Artemis ATP Sparkfun #DEV-15442 The RedBoard Artemis ATP is affectionately called 'All the Pins!' at SparkFun. The Artemis module has 48 GPIO and this board breaks out absolutely every one of them in a familiar Mega like form factor. What's with the silkscreen labels? They're all over the place.Delivered in 5 to 10 days€ 38,25 Incl. VAT
- SparkFun Thing Plus - ESP32 WROOM (Micro-B) Sparkfun #WRL-15663 "Maximize your IoT projects with the SparkFun ESP32 Thing Plus. This versatile, Feather-compatible board features a powerful ESP32-D0WDQ6 chip and Qwiic Connect System. Program it with Arduino IDE, connect without soldering, and enjoy its wide range of peripherals."Delivered in 5 to 10 days€ 31,00 Incl. VAT
- SparkFun LoRa Thing Plus - expLoRaBLE Sparkfun #WRL-17506 Get the versatile SparkFun expLoRaBLE Thing Plus development board, featuring NM180100 SiP, Ambiq Apollo3 microcontroller, Semtech SX1262 LoRa transceiver, and Qwiic Connect System. Supports 868MHz, 915MHz bands, and Bluetooth Low Energy.Delivered in 5 to 10 days€ 68,00 Incl. VAT
- SparkFun Thing Plus - ESP32 WROOM (U.FL) Sparkfun #WRL-17381 Boost your IoT projects with the SparkFun ESP32 Thing Plus with U.FL. This powerful MCU module features WiFi and Bluetooth, is adaptable for various applications, and simplifies prototyping with the Qwiic Connect System.Delivered in 5 to 10 days€ 31,50 Incl. VAT
- SparkFun Thing Plus - XBee3 Micro (Chip Antenna) Sparkfun #WRL-15454 Upgrade your wireless device development with the XBee3 Thing Plus. This compact, user-friendly solution combines XBee & Qwiic power, 20 I/O pins, and Lithium-Polymer Ion battery management. Ideal for rapid prototyping of connected devices.Delivered in 5 to 10 days€ 74,00 Incl. VAT
- SparkFun Thing Plus - XBee3 Micro (U.FL) Sparkfun #WRL-15435 Upgrade your wireless device development with the XBee3 Thing Plus. This compact design combines XBee & Qwiic, featuring 20 I/O pins, lithium polymer ion battery management, and a programmable XBee3 Micro Module with a 250Kbps RF. Ideal for quick prototyping and connected devices.Delivered in 5 to 10 days€ 69,75 Incl. VAT
- Sparkfun Alchitry Au+ FPGA Development Board (Xilinx Artix 7) Sparkfun #DEV-17514 Boost your FPGA projects with the Alchitry Au+ Development Board, featuring a robust Xilinx Artix 7 FPGA chip for complex applications. Equipped with 256MB DDR3 RAM, 102 IO pins, and a Qwiic connector for easy integration. Expandable with stackable "Elements".Delivered in 5 to 10 days€ 406,60 Incl. VAT
- Sparkfun Alchitry Au FPGA Development Board (Xilinx Artix 7) Sparkfun #DEV-16527 Explore the world of FPGA with the Alchitry Au FPGA Development Board by SparkFun. Featuring a Xilinx Artix 7 FPGA, 256MB DDR3 RAM, 102 3.3V logic level IO pins, and Qwiic connector for easy I2C integration. Expandable with stackable "Elements".Delivered in 5 to 10 days€ 135,75 Incl. VAT
- SparkFun RED-V Thing Plus - SiFive RISC-V FE310 SoC Sparkfun #DEV-15799 Get the cost-effective SparkFun RED-V Thing Plus, an open-source development board with Freedom E310 core and RISC-V ISA. Features USB-C connector, Feather compatibility, Qwiic connector, and 150MHz speed. Ideal for RISC-V projects.Delivered in 5 to 10 days€ 42,60 Incl. VAT
- Sparkfun Alchitry Cu FPGA Development Board (Lattice iCE40 HX) Sparkfun #DEV-16526 Begin your FPGA journey with the affordable Alchitry Cu FPGA Development Board by Sparkfun. Equipped with a Lattice iCE40 HX FPGA, 79 IO pins, 8 LEDs, a 100MHz onboard clock, and a Qwiic connector for easy I2C integration. Expandable with "Elements".Delivered in 5 to 10 days€ 66,25 Incl. VAT
- SparkFun RED-V RedBoard - SiFive RISC-V FE310 SoC Sparkfun #DEV-15594 "Experience open-source development with the SparkFun RED-V RedBoard. Features Freedom E310 SoC, RISC-V ISA, Arduino Uno R3 form factor, 32MB QSPI flash, USB-C, JTAG & Qwiic connectors. Ideal for prototyping & developing RISC‑V applications."Delivered in 5 to 10 days€ 45,70 Incl. VAT
- SparkFun NanoBeacon Lite Board - IN100 Sparkfun #WRL-21293 Get the SparkFun IN100 NanoBeacon Lite Board for low-energy BT beacon breakout. It's perfect for wireless sensor monitoring, asset tracking, and retail beacons. Features a coin cell battery holder, Qwiic connector, and a reset button. Ideal for prototyping applications.Delivered in 5 to 10 days€ 9,05 Incl. VAT
- SparkFun QwiicBus - EndPoint Sparkfun #COM-16988 Boost your I2C communication range with the SparkFun QwiicBus EndPoint. Featuring the PCA9615 IC, it transforms standard signals into four differential ones, extending reach up to 30.48 meters. Perfect for large sensor networks and noise-prone environments.Delivered in 5 to 10 days€ 18,50 Incl. VAT
- Sparkfun Alchitry Au FPGA Kit Sparkfun #KIT-16497 Explore FPGA with the Alchitry Au FPGA Kit from Sparkfun. Featuring a Xilinx Artix 7 FPGA, DDR3 RAM, and a variety of components for versatile applications. Perfect for both beginners and experienced users.Delivered in 5 to 10 days€ 179,00 Incl. VAT
- Sparkfun Alchitry Io Element Board Sparkfun #DEV-17278 Discover the world of digital design with the Alchitry Io Element Board. Ideal for beginners, it offers a hands-on experience with 4 7-segment LED digits, 5 push buttons, 24 LEDs, and 24 DIP switches. Perfect for use with Au and Cu FPGA Development Boards.Delivered in 5 to 10 days€ 37,10 Incl. VAT
- SparkFun MicroMod Alorium Sno M2 Processor Sparkfun #DEV-18030 SparkFun MicroMod Alorium Sno M2 Processor, a compact & versatile hardware, features Snō System on Module, 8-bit AVR instruction set, and FPGA platform. It's perfect for space-constrained applications and fully compatible with Arduino IDE.Delivered in 5 to 10 days€ 61,75 Incl. VAT
- SparkFun Qwiic EEPROM Breakout - 512Kbit Sparkfun #COM-18355 Get the SparkFun Qwiic EEPROM Breakout for cost-effective, additional storage space. Ideal for microcontrollers without EEPROM storage, it offers 512Kb storage and features 3 address jumpers. Perfect for storing GPS data and user settings.Delivered in 5 to 10 days€ 6,25 Incl. VAT
- Sparkfun Tsunami Super WAV Trigger - 25 Voice (Qwiic) Sparkfun #WIG-20636 "Enhance your audio projects with the Qwiic Tsunami Super WAV Trigger. This powerful module can play up to 25 mono or 13 stereo tracks simultaneously. It features 8 audio output channels, independent volume control, MIDI port, and seamless looping. Compatible with Arduino and Python libraries."Delivered in 5 to 10 days€ 105,00 Incl. VAT
- SparkFun Qwiic Wireless Speaker Kit Sparkfun #KIT-21773 Get the SparkFun Qwiic Wireless Speaker Kit for easy assembly of a wireless audio speaker. The kit includes pre-soldered header pins, ESP32 IoT RedBoard for wireless music streaming, and a high-quality WM8960 Audio Codec. Perfect for crafting your own wireless audio BT adapter.Delivered in 5 to 10 days€ 92,50 Incl. VAT
- SparkFun Qwiic MP3 Trigger Sparkfun #DEV-19030 "Play your favorite MP3s with ease using the SparkFun Qwiic MP3 Trigger. Connect to your system without soldering, load up to 255 tracks on a micro SD card, and control with simple I2C commands. Compatible with Arduino library and Qwiic ecosystem."Delivered in 5 to 10 days€ 24,75 Incl. VAT
- SparkFun Air Velocity Sensor Qwiic Kit - FS3000-1015 Sparkfun #KIT-21310 Get the SparkFun Air Velocity Sensor Qwiic Kit - FS3000-1015 to monitor airflow in data centers, HVAC systems, and more. This comprehensive kit includes a RedBoard Artemis Nano and a MEMS thermopile-based sensor with 12-bit resolution for accurate readings.Delivered in 5 to 10 days€ 86,50 Incl. VAT
The 3 most popular Qwiic Modules
