Sensor modules
Sensor modules are modular PCBs with one or more sensors and the supporting electronics. These sensors can easily be connected to a microcontroller such as the Arduino to read the values.251 resultsSort by
- HC-SR04 Ultrasonic distance detection module The HC-SR04 module measures distance to objects by means of ultrasonic reflection. This is done by firing pulses of 40 kHz to the environment, after which the time required to receive the reflected signals is measured. 10 for € 2,09 ea. 25 for € 1,96 ea. 50 for € 1,83 ea. 100 for € 1,70 ea. 500 for € 1,57 ea. More information In stock Sold per piece€ 2,25 Incl. VATAdd to cart
- Magnetic switch module This module measures magnetic fields and gives a signal at an adjustable switching point. The magnetic switch works at 3.3V and 5V, whereby the sensitivity can be adjusted with the potentiometer. 10 for € 2,42 ea. 25 for € 2,29 ea. 50 for € 2,15 ea. 100 for € 2,01 ea. 500 for € 1,88 ea. More information In stock Sold per piece€ 2,55 Incl. VATAdd to cart
- PIR motion detection module This PIR (Pyroelectric Infrared Motion) module is an infrared sensor, with supporting components generating a digital signal when motion occurs. 10 for € 2,24 ea. 25 for € 2,11 ea. 50 for € 1,98 ea. 100 for € 1,85 ea. 500 for € 1,72 ea. More information In stock Sold per piece€ 2,40 Incl. VATAdd to cart
- Infrared object detection module This module makes it possible to register reflection at a fixed distance. The distance can be set by bending the LEDs more towards each other or apart. In addition, the sensitivity can be set using the potentiometer at which the output becomes high. 10 for € 1,65 ea. 25 for € 1,54 ea. 50 for € 1,42 ea. 100 for € 1,31 ea. 500 for € 1,19 ea. More information In stock Sold per piece€ 1,80 Incl. VATAdd to cart
- Ground humidity sensor module This is a simple humidity sensor, which can be used to measure the humidity in the ground. This makes it possible for the Arduino to give a notification if the plant needs water. This module has both the possibility of digital and analog output. 10 for € 1,89 ea. 25 for € 1,77 ea. 50 for € 1,64 ea. 100 for € 1,52 ea. 500 for € 1,40 ea. More information In stock Sold per piece€ 2,05 Incl. VATAdd to cart
- Regen sensor module Well-functioning rain sensor. Including opamp (amplifier) circuit so that the sensor can work as a switch. It is also possible to connect the rain sensor directly to the Arduino via the analog input. 10 for € 1,85 ea. 25 for € 1,73 ea. 50 for € 1,61 ea. 100 for € 1,49 ea. 500 for € 1,37 ea. More information In stock Sold per piece€ 2,00 Incl. VATAdd to cart
- Sound detection sensor module This module acts as a switch with sound as input. When a sound is detected above the set sensitivity, this module briefly signals. This module can be used as a blow sensor or a trigger when too much noise is made. 10 for € 2,02 ea. 25 for € 1,90 ea. 50 for € 1,77 ea. 100 for € 1,65 ea. 500 for € 1,52 ea. More information In stock Sold per piece€ 2,15 Incl. VATAdd to cart
- Spanningsdeler module Simple voltage divider module. This module simply contains 2 resistors that divide the supplied voltage by 5. This makes it possible to measure a voltage with the arduino that is 5 times higher than the voltage that the arduino itself is working on. 10 for € 1,67 ea. 25 for € 1,56 ea. 50 for € 1,44 ea. 100 for € 1,32 ea. 500 for € 1,21 ea. More information In stock Sold per piece€ 1,80 Incl. VATAdd to cart
- MQ-135 air quality sensor This module contains a sensor to detect the concentrations of various harmful gases in the air. The MQ-135 can record gas concentrations from 300 to 5000ppm. This module ordered both an analog output and a digital output, which triggers an adjustable concentration. 10 for € 2,34 ea. 25 for € 2,22 ea. 50 for € 2,08 ea. 100 for € 1,96 ea. 500 for € 1,82 ea. More information In stock Sold per piece€ 2,50 Incl. VATAdd to cart
- PCF8591 AD / DA Converter module This AD (analog / digital) / DA (digital / analog) module can serve as a bridge between digital and analog. With an analog input of 0V - 5V, a value of 8 bit is generated, which is sent again by means of the I2C protocol. 10 for € 2,37 ea. 25 for € 2,29 ea. 50 for € 2,20 ea. 100 for € 2,12 ea. 500 for € 2,03 ea. More information In stock Sold per piece€ 2,50 Incl. VATAdd to cart
- TCRT5000 Infrared line detection module This line detection module uses the TCRT5000 (emitter and detector combo) to detect the reflection of a material at a distance of 0 to 3 cm. This module provides both analog and digital output for easy use. 10 for € 1,80 ea. 25 for € 1,68 ea. 50 for € 1,56 ea. 100 for € 1,45 ea. 500 for € 1,32 ea. More information In stock Sold per piece€ 1,95 Incl. VATAdd to cart
- Temperature controlled relay 12V - W1209 This temperature-controlled relay that, as the name suggests, contains a relay that is activated at a preset temperature. The supplied probe, which contains an accurate thermistor, measures the current temperature with an interval of 2Hz. 10 for € 3,56 ea. 25 for € 3,39 ea. 50 for € 3,22 ea. 100 for € 3,05 ea. 500 for € 2,88 ea. More information In stock Sold per piece€ 3,75 Incl. VATAdd to cart
- -19 % GP2Y1010AU0F dust sensor module The GP2Y1010AU0F dust sensor module measures the number of dust particles in the air with a sensitivity of 0.1mg / M3. 10 for € 1,84 ea. 25 for € 1,77 ea. 50 for € 1,70 ea. 100 for € 1,64 ea. 500 for € 1,57 ea. More information In stock Sold per piece€ 2,35 € 1,90 Incl. VATAdd to cart
- 9-DOF (gyroscope, accelerometer, magnetometer) module This compact 9DOF (degrees of freedom) board contains 3 sensors to measure speed, rotation and the magnetic poles. This module is very useful for balancing robots, helicopters or even quadcopters. It is also possible to simulate the functionality comparable to the Wii mote. 10 for € 7,54 ea. 25 for € 7,28 ea. 50 for € 7,03 ea. 100 for € 6,77 ea. 500 for € 6,52 ea. More information In stock Sold per piece€ 7,80 Incl. VATAdd to cart
- BH1750FVI digital light sensor module (GY-302) The BH1750FVI is a calibrated digital light sensor that measures the intensity of the ambient light and stores it as a 16-bit number. This sensor can measure the light intensity between 0 and 65535 Lux (L). 10 for € 2,32 ea. 25 for € 2,19 ea. 50 for € 2,05 ea. 100 for € 1,92 ea. 500 for € 1,79 ea. More information In stock Sold per piece€ 2,45 Incl. VATAdd to cart
- Digital thermometer with display This digital thermometer has a probe of approximately 80 cm. The thermometer also has a measuring range between -50 and + 110 ° C and works on 2 x LR44 (1.5V) batteries. 10 for € 3,31 ea. 25 for € 3,16 ea. 50 for € 3,- ea. 100 for € 2,85 ea. 500 for € 2,70 ea. More information In stock Sold per piece€ 3,50 Incl. VATAdd to cart
- Radar motion detection sensor module, 3.3V - 20V This economical and highly sensitive motion detection module uses the doppler effect to detect motion. Unlike the PIR sensor, this sensor is not that easy to fool. At a frequency of 5.8 GHz, signals are transmitted in 360 degrees, which are reflected back ... 10 for € 3,84 ea. 25 for € 3,68 ea. 50 for € 3,50 ea. 100 for € 3,34 ea. 500 for € 3,18 ea. More information In stock Sold per piece€ 4,05 Incl. VATAdd to cart
- ACS711EX Current Sensor Carrier -15.5A to +15.5A Pololu #2452 This board is a simple carrier of Allegro’s ±15.5 A ACS711 Hall effect-based linear current sensor with overcurrent fault output, which offers a low-resistance (~0.6 mΩ) current path and electrical isolation up to 100 V. This version accepts a bidirectional current input with a magnitude... 10 for € 3,49 ea. 25 for € 3,32 ea. 50 for € 3,16 ea. 100 for € 2,98 ea. 500 for € 2,81 ea. More information In stock Sold per piece€ 3,70 Incl. VATAdd to cart
- ADS1115 16 Bit ADC Module For microcontrollers without an analog-to-digital converter (such as a RaspBerry Pi or Orange Pi), the ADS1115 offers the solution with 16-bit precision at 860 samples / second over I2C. The module works on 2V to 5V and has a selectable address, so there are 4 modules on an I2C bus ... 10 for € 5,36 ea. 25 for € 5,15 ea. 50 for € 4,95 ea. 100 for € 4,75 ea. 500 for € 4,55 ea. More information In stock Sold per piece€ 5,60 Incl. VATAdd to cart
- Pololu Carrier with Sharp GP2Y0A60SZLF Analog Distance Sensor 10-150cm, 5V Pololu #2474 The GP2Y0A60SZ distance sensor from Sharp offers a wide detection range of 4″ to 60″ (10 cm to 150 cm) and a high update rate of 60 Hz. The distance is indicated by an analog voltage, so only a single analog input is required to interface with the module. 10 for € 12,45 ea. 25 for € 12,23 ea. 50 for € 12,- ea. 100 for € 11,77 ea. 500 for € 11,54 ea. More information In stock Sold per piece€ 12,70 Incl. VATAdd to cart
- MH-Z14A Carbon dioxide sensor - 5000ppm The MH-Z14 Carbon Dioxide sensor accurately measures the carbon particles in the air through infrared light. 10 for € 32,72 ea. 25 for € 31,87 ea. 50 for € 31,02 ea. 100 for € 30,16 ea. 500 for € 29,32 ea. More information In stock Sold per piece€ 33,60 Incl. VATAdd to cart
- VL53L0X Time-of-Flight Distance Sensor Carrier with Voltage Regulator, 200cm Max Pololu #2490 This sensor module contains the ST's VL53L0X laser-ranging sensor, which can measure the distance to an object up to 2 meters. The VL53L0X uses time-of-flight measurements with infrared pulses so that the distance can be measured accurately and independently of the color of the object. 10 for € 8,35 ea. 25 for € 8,12 ea. 50 for € 7,89 ea. 100 for € 7,67 ea. 500 for € 7,44 ea. More information In stock Sold per piece€ 8,60 Incl. VATAdd to cart
- Tansparant frame for the W1209 temperature-controlled relay Tansparant frame for the W1209 temperature controlled relay. 10 for € 1,82 ea. 25 for € 1,70 ea. 50 for € 1,58 ea. 100 for € 1,46 ea. 500 for € 1,34 ea. More information In stock Sold per piece€ 1,95 Incl. VATAdd to cart
- VL6180X Time-of-Flight Distance Sensor Carrier with Voltage Regulator, 60cm max Pololu #2489 This sensor is a carrier/breakout board for ST’s VL6180X proximity and ambient light sensor, which measures the range to a target object up to 20 cm away (or 60 cm with reduced resolution). 10 for € 7,08 ea. 25 for € 6,93 ea. 50 for € 6,78 ea. 100 for € 6,64 ea. 500 for € 6,49 ea. More information In stock Sold per piece€ 7,25 Incl. VATAdd to cart
- Adafruit PT100 RTD Temperature Sensor Amplifier - MAX31865 Adafruit #3328 Adafruit PT100 RTD Temperature Sensor Amplifier - MAX31865.For precision temperature sensing, nothing beats a Platinum RTD. More information In stock Sold per piece€ 18,15 Incl. VATAdd to cart
- Electret Microphone Amplifier - MAX4466 with Adjustable Gain Adafruit #1063 Add an ear to your project with this well-designed electret microphone amplifier. This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on. More information In stock Sold per piece€ 6,85 Incl. VATAdd to cart
- BME280 1.8 - 5V Digital temperature, humidity and air pressure sensor module The BME280 is a 3-in-1 sensor which can measure the temperature, humidity and air pressure and communicates via an SPI or I2C interface. This module contains a level shifter, so that it can be connected to a voltage between 1.8 V and 5 V. 10 for € 13,80 ea. 25 for € 13,39 ea. 50 for € 12,99 ea. 100 for € 12,60 ea. 500 for € 12,19 ea. More information In stock Sold per piece€ 14,20 Incl. VATAdd to cart
- -18 % MPL3115A2 - I2C Barometric Pressure/Altitude/Temperature Sensor Adafruit #1893 This pressure sensor from Freescale is a great low-cost sensing solution for precision measurement of barometric pressure and altitude. The MPL3115A2 has a typical 1.5 Pascal resolution, which can resolve altitude at 0.3 meters (compare to the BMP180 which can do 0.17m). More information In stock Sold per piece€ 2,80 € 2,30 Incl. VATAdd to cart
- -17 % MinIMU-9 v5 Gyro, Accelerometer, and Compass (LSM6DS33 and LIS3MDL Carrier) Pololu #2738 The Pololu MinIMU-9 v5 is an inertial measurement unit (IMU) that packs an LSM6DS33 3-axis gyro and 3-axis accelerometer and an LIS3MDL 3-axis magnetometer onto a tiny 0.8″ × 0.5″ board. 10 for € 4,33 ea. 25 for € 4,28 ea. 50 for € 4,22 ea. 100 for € 4,17 ea. 500 for € 4,12 ea. More information In stock Sold per piece€ 5,30 € 4,40 Incl. VATAdd to cart
- Analog UV Light Sensor Breakout - GUVA-S12SD Adafruit #1918 Extend your light-sensing spectrum with this analog UV sensor module. It uses a UV photodiode, which can detect the 240-370nm range of light (which covers UVB and most of UVA spectrum). More information In stock Sold per piece€ 8,00 Incl. VATAdd to cart
- ADXL345 3-axis Accelerometer (GY-291) The ADXL345 accelerometer is a small and efficient sensor with a high resolution (13-bit) that can measure an acceleration of up to ± 16g. The module can be accessed via the I2C or SPI protocol and can be supplied with a voltage between 3V and 5V. 10 for € 3,30 ea. 25 for € 3,15 ea. 50 for € 2,99 ea. 100 for € 2,83 ea. 500 for € 2,67 ea. More information In stock Sold per piece€ 3,50 Incl. VATAdd to cart
- NTC 10K 1 meter cable This cable with an NTC probe with a length of 1 meter is suitable for the w1209 and w1401 temperature controlled relays. 10 for € 1,89 ea. 25 for € 1,76 ea. 50 for € 1,64 ea. 100 for € 1,52 ea. 500 for € 1,40 ea. More information In stock Sold per piece€ 2,05 Incl. VATAdd to cart
- -18 % ACS714 Current Sensor Carrier -30A to +30A Pololu #1187 This board is a simple carrier of Allegro’s ±30A ACS714 Hall effect-based linear current sensor, which offers a low-resistance (~1.2 mΩ) current path and electrical isolation up to 2.1 kV RMS. 10 for € 4,78 ea. 25 for € 4,68 ea. 50 for € 4,57 ea. 100 for € 4,47 ea. 500 for € 4,37 ea. More information In stock Sold per piece€ 5,95 € 4,90 Incl. VATAdd to cart
- Flora Color Sensor with White Illumination LED - TCS34725 Adafruit #1356 Flora Color Sensor with White Illumination LED - TCS34725.Your electronics can now see in dazzling color with this lovely color light sensor. We found the best color sensor on the market, the TCS34725, which has RGB and Clear light sensing elements. More information In stock Sold per piece€ 8,00 Incl. VATAdd to cart
- Adafruit Universal Thermocouple Amplifier MAX31856 Breakout Adafruit #3263 Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference, as well as calculations to handle any non-linearities. For a long time we've suggested our MAX31855K breakout, which works great but is only for K-type thermocouples. More information In stock Sold per piece€ 15,10 Incl. VATAdd to cart
- ADS1115 16-Bit ADC - 4 Channel with Programmable Gain Amplifier Adafruit #1085 For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1115 provides 16-bit precision at 860 samples/second over I2C. The chip can be configured as 4 single-ended input channels, or two differential channels. More information In stock Sold per piece€ 14,20 Incl. VATAdd to cart
- ADS1015 12-Bit ADC - 4 Channel with Programmable Gain Amplifier Adafruit #1083 For microcontrollers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1015 provides 12-bit precision at 3300 samples/second over I2C. The chip can be configured as 4 single-ended input channels, or two differential channels. More information In stock Sold per piece€ 9,40 Incl. VATAdd to cart
- Adafruit AS7262 6-Channel Visible Light / Color Sensor Breakout Adafruit #3779 The colors of the rainbow, so pretty in the skyAre also in this sensor, controlled by you and I!Detect trees of green, and red roses too with the new Adafruit AS7262 6-Channel Visible Light / Color Sensor Breakout. More information In stock Sold per piece€ 19,20 Incl. VATAdd to cart
- BME680 Breakout - Air Quality, Temperature, Pressure, Humidity Sensor Pimoroni #PIM357 The state-of-the-art BME680 breakout lets you measure temperature, pressure, humidity, and indoor air quality, and is Raspberry Pi and Arduino-compatible! Use this breakout to monitor every aspect of your indoor environment. 10 for € 17,61 ea. 25 for € 17,16 ea. 50 for € 16,69 ea. 100 for € 16,24 ea. 500 for € 15,79 ea. More information In stock Sold per piece€ 18,10 Incl. VATAdd to cart
- VCNL4010 Proximity/Light sensor Adafruit #466 The VCNL4010 sensor is a nice way to add a small-distance proximity sensor to your microcontroller project. For longer distances (in the range of cm, you can use a SHARP IR distance sensor, but those are only good if the object is over 10 cm away. More information In stock Sold per piece€ 7,20 Incl. VATAdd to cart
- INA219 High Side DC Current Sensor Breakout - 26V ±3.2A Max Adafruit #904 This breakout board will solve all your power-monitoring problems. Instead of struggling with two multimeters, you can just use the handy INA219B chip on this breakout to both measure both the high side voltage and DC current draw over I2C with 1% precision. More information In stock Sold per piece€ 9,60 Incl. VATAdd to cart
- -17 % Sharp GP2Y0A41SK0F Analog Distance Sensor 4-30cm Pololu #2464 The GP2Y0A41SK0F Sharp analog distance sensor features a detection range of 1.5″ to 12″ (4 cm to 30 cm). The shorter range gives you higher resolution measurements, and the lower minimum detection distance makes this sensor great for detecting very close objects. 10 for € 2,05 ea. 25 for € 1,97 ea. 50 for € 1,90 ea. 100 for € 1,82 ea. 500 for € 1,75 ea. More information In stock Sold per piece€ 2,60 € 2,15 Incl. VATAdd to cart
- Thermocouple Amplifier MAX31855 breakout board (MAX6675 upgrade) Adafruit #269 Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. The MAX31855K does everything for you, and can be easily interfaced with any microcontroller, even one without an analog input. More information In stock Sold per piece€ 13,65 Incl. VATAdd to cart
- SparkFun Load Cell Amplifier - HX711 Sparkfun #SEN-13879 The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. 10 for € 9,13 ea. 25 for € 8,88 ea. 50 for € 8,63 ea. 100 for € 8,37 ea. 500 for € 8,12 ea. More information In stock Sold per piece€ 9,40 Incl. VATAdd to cart
- -17 % SparkFun Load Sensor Combinator Sparkfun #BOB-13878 The SparkFun Load Sensor Combinator is a bare PCB that combines four load sensors into a standard four-wire Wheatstone bridge configuration. If you open up an electronic bathroom scale, you’ll find a large rat's nest of wires. 10 for € 0,22 ea. 25 for € 0,21 ea. 50 for € 0,20 ea. 100 for € 0,19 ea. 500 for € 0,18 ea. More information In stock Sold per piece€ 0,30 € 0,25 Incl. VATAdd to cart
- Laser detection sensor module This detection sensor module is a simple breakout with an input voltage of 5V. The sensor is supplied separately and can easily be connected to the module header. When a laser points on the sensor, the sensor output becomes high (5V). 10 for € 2,14 ea. 25 for € 2,02 ea. 50 for € 1,89 ea. 100 for € 1,76 ea. 500 for € 1,63 ea. More information In stock Sold per piece€ 2,30 Incl. VATAdd to cart
- Air quality, CO2, temperature and humidity sensor - CCS811 HDC1080 This module combines 2 powerful chips to measure the air quality, humidity and temperature in an environment. This makes the module a compact solution for projects where the quality of the air in a room must be monitored. The module works with 3.3V and communicates via I2C. 10 for € 24,90 ea. 25 for € 24,23 ea. 50 for € 23,56 ea. 100 for € 22,90 ea. 500 for € 22,23 ea. More information In stock Sold per piece€ 25,60 Incl. VATAdd to cart
- ACHS-7125 Current Sensor Carrier -50A to +50A Pololu #4034 This board is a simple carrier of Broadcom’s bidirectional ±50A ACHS-7124 Hall effect-based linear current sensor, which offers a low-resistance (~0.7 mΩ) current path and electrical isolation up to 3 kV RMS. 10 for € 3,96 ea. 25 for € 3,83 ea. 50 for € 3,70 ea. 100 for € 3,57 ea. 500 for € 3,44 ea. More information In stock Sold per piece€ 4,10 Incl. VATAdd to cart
- Gravity: Analog Turbidity Sensor For Arduino DFRobot #SEN0189 The arduino turbidity sensor detects water quality by measuring level of turbidity. It is able to detect suspended particles in water by measuring the light transmittance and scattering rate which changes with the amount of total suspended solids (TSS) in water. 10 for € 8,40 ea. 25 for € 8,16 ea. 50 for € 7,93 ea. 100 for € 7,69 ea. 500 for € 7,46 ea. More information In stock Sold per piece€ 8,65 Incl. VATAdd to cart
- Gravity: Analog pH Sensor/Meter Kit V2 DFRobot #SEN0161-V2 DFRobot Gravity: Analog pH meter V2 is specifically designed to measure the pH of the solution and reflect the acidity or alkalinity. It is commonly used in various applications such as aquaponics, aquaculture, and environmental water testing. 10 for € 37,01 ea. 25 for € 36,10 ea. 50 for € 35,18 ea. 100 for € 34,27 ea. 500 for € 33,36 ea. More information In stock Sold per piece€ 37,95 Incl. VATAdd to cart
