Material

Material to build projects such as enclosures, protoboards, breadboards, cables and wiring.

1820 results Sort by

Load previous

Rocker switch 12V round with blue lamp Rocker on-off button in round version with built-in blue lamp. This switch has a built-in diameter of 20 mm and an outer diameter of 23 mm.
In stock
€ 2,85 Incl. VAT
Copper tape 5mm self-adhesive - 50 meters Copper tape with a width of 5 mm with an adhesive layer on the bottom. This tape is made of 99.98% copper with a thickness of 30 microns, which makes this tape very well guided.
In stock
€ 5,00 Incl. VAT
Silicone Hose 2.4x4mm transparent - 2 meter This hose has an outside diameter of 4 mm and an inside diameter of 2.4 mm. The hose is made of strong and flexible silicone with a transparent color and is suitable for peristaltic pumps.
In stock
€ 5,25 Incl. VAT
Fuse holder with wire (22AWG) Fuse holder with 10 cm (22AWG) wire on both sides. The fuse holder is suitable for glass 5x20mm fuses with a maximum break-through current of 15A.
In stock
€ 1,50 Incl. VAT
Experiment print 7x9cm - 5 pieces Set of 5 single-sided prototyping boards with 744 pads and a 30-block grid. Ideal for quick prototyping, component testing, and small-scale projects.
In stock
€ 3,25 Incl. VAT
5V 160mA solar panel Solar panel with a voltage of max 5V and a current of max 160mA. This panel has a maximum power of 0.8W.
In stock
€ 4,65 Incl. VAT
9V battery holder with switch This 9V battery holder contains a built-in switch to connect the connected circuit of the battery. The housing is made of sturdy plastic with a lid that can be slid over the battery for a seamless...
In stock
€ 1,40 Incl. VAT
2x3 AA battery holder - 9V This 2x3 x AA (9V) plastic battery holder has a connector of 24cm long. With the sturdy housing, a battery can be easily clicked off and on without having to glue the battery to the project.
In stock
€ 2,60 Incl. VAT
6 x AA battery holder DC plug - 9V This 6 x AA (9V) plastic battery holder has a 2.1mm DC plug connector of 24cm long. With the sturdy housing, a battery can be easily clicked off and on without having to glue the battery to the...
In stock
€ 2,90 Incl. VAT
IC Female header 40 pin 2,54mm - 5 stuks Set of 5 Female IC headers with 40 pins and a pin spacing of 2.54 mm. Breakable per pin for flexible applications. Not compatible with standard male/female headers.
In stock
€ 3,80 Incl. VAT
Crown stone strip 10A - 5 pieces A set of 5 terminal block strips. There are 12 connections of 10A on the terminal block strip, which can be removed from the strip per piece. Suitable for various wire diameters and temperatures.
In stock
€ 4,25 Incl. VAT
Female headers angled 40 pin 2.54mm - 5 pieces This set of 5 right-angle female headers with 40 pins and a 2.54 mm pitch is ideal for various electronic projects. They are compatible with standard breadboards and offer extra flexibility thanks to their right-angle design.
In stock
€ 3,10 Incl. VAT
Solenoid slot 6V This electromagnetic (solenoid) push-pull switch works on 6V with a current of up to 1A. This solenoid contains a pin which is retracted about 10 mm when voltage is applied. The pulling force is around 1500 grams.
In stock
€ 6,35 Incl. VAT
Soldering tin - 0.5mm - rasin core - 100g Our Soldering Tin 63/37 0.5mm 100g with 2.0% flux is ideal for various jobs. Enjoy good flow and bonding without the high costs. Perfect for hobbyists and professionals.
In stock
€ 4,90 Incl. VAT
Terminal block 10p with protective cap 15A This terminal block with 10 connection points can withstand 600V and 15A. Because this terminal block can withstand high voltages, it is supplied with a removable protective cover for protection.
In stock
€ 1,60 Incl. VAT
FEETECH Ultra-High-Torque, High-Voltage Digital Giant Servo FT5335M Feetech #FT5335M The FEETECH FT5335M servo is all about torque. This 1/4-scale digital servo can deliver an incredible 550 oz-in of torque at 7.4 V or 480 oz-in at 6 V thanks to its powerful motor and all-metal gear train. The FT5335M is a high-voltage servo, offering an operating voltage range of 6 V to 7.4 V.
In stock
€ 73,20 Incl. VAT
0.1" (2.54mm) Crimp Connector Housing: 1x5-Pin 10-Pack Pololu #1904 These five-pin housings work with our wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 10.
In stock
€ 2,10 Incl. VAT
Universal Aluminum Mounting Hub for 6mm Shaft, M3 Holes (2-Pack) Pololu #1999 These universal aluminum mounting hubs allow you to mount custom wheels and mechanisms to 6 mm diameter motor shafts. The set includes two hubs, four M3 set screws for securing the hubs to motor shafts, and one 1.5 mm Allen wrench for use with the set screws.
In stock
€ 10,65 Incl. VAT
Aluminum Scooter Wheel Adapter for 5mm Shaft Pololu #2673 This two-part aluminum assembly mounts directly to 5 mm diameter motor output shafts like those on many of our stepper motors and allows you to drive most scooter, skateboard, inline skate,
In stock
€ 6,65 Incl. VAT
Tactile buttons 6x6x5mm 2p - 25 pieces Set of 25 tactile push buttons measuring 6x6x5mm with two legs. Suitable for various electronic applications.
In stock
€ 2,75 Incl. VAT
Tactile buttons 6x6x6mm - SMD - 25 pieces Set of 25 tactile buttons measuring 6x6x6mm with SMD footprint. Suitable for surface mounting and various electronic projects.
In stock
€ 3,00 Incl. VAT
Tansparant frame for the W1209 temperature-controlled relay Tansparant frame for the W1209 temperature controlled relay.[product display] 11170 [/ product display]
In stock
€ 1,50 Incl. VAT
Soldering tin - 0.3mm - rasin core - 10g Budget-friendly 10-gram roll of solder tin with a 0.3mm diameter. 63/37 composition with a resin core for optimal flow. Ideal for smaller and detailed soldering tasks.
In stock
€ 3,75 Incl. VAT
Micro JST 2-Pin 1.25mm male/female connector paar - 5 stuks This set of 5 pairs of micro JST connectors with a 1.25mm pitch and 2 wires is perfect for creating compact and reliable connections in electronic projects. The set includes both 5 male and 5 female connectors.
In stock
€ 2,90 Incl. VAT
SN-48B Crimping tool 16-26AWG - 0.5 / 1 / 1.5 mm2 The SN-48B Crimping Pliers is an essential and versatile instrument, designed for both DIY enthusiasts and professionals who strive for reliable and durable electrical connections.
In stock
€ 12,45 Incl. VAT
Mini MOSFET Slide Switch with Reverse Voltage Protection, SV Pololu #2811 This breadboard-compatible module is an alternative to bulky power switches. It uses a small integrated slide switch to control a high-side power MOSFET that can deliver continuous currents up to...
In stock
€ 5,00 Incl. VAT
Adafruit Perma-Proto Full-sized Breadboard PCB - 3 pcs Adafruit #590 Customers have asked us to carry basic perf-board, but we never liked the look of most basic perf: its always crummy quality, with pads that flake off and no labeling.
In stock
€ 24,30 Incl. VAT
Feather Stacking Headers - 12-pin and 16-pin female headers Adafruit #2830 These two Female Stacking Headers alone are, well, lonely. But pair them with any of our Feather boards and you're in business!
In stock
€ 1,40 Incl. VAT
Mini USB 2.0 cable male connector - 5 pieces This set of 5 male mini USB connectors is perfect for creating your own custom-length USB cables. They are easy to use and ensure reliable data and power transmission. Suitable for multiple electronic projects.
In stock
€ 2,40 Incl. VAT
Mini MOSFET Slide Switch with Reverse Voltage Protection, LV Pololu #2810 This breadboard-compatible module is an alternative to bulky power switches. It uses a small integrated slide switch to control a high-side power MOSFET that can deliver continuous currents up to around 6 A at 2 V to 20 V.
In stock
€ 4,10 Incl. VAT
Raspberry Pi Aluminum Heatsink set - 3 pcs This heatsink set for the Raspberry PI 2 and Raspberry PI 3 consists of 2 heatsinks of 8.9 mm x 9.3 mm and 1 heatsink of 14.3 mm x 13.9 mm. This set can be used for better heat dissipation of the Raspberry PI, which increases the lifespan and performance.
In stock
€ 1,35 Incl. VAT
JST-PH 2-Pin SMT Right Angle Breakout Board Adafruit #1862 A simple 2-pin connector soldered onto a breadboard-friendly breakout. This is compatible with the "JST PH 2-pin" connector. Mates perfectly with all our 1-cell LiPoly and LiIon batteries as well as our 6V coin cell holder and 3xAAA battery pack.
In stock
€ 1,70 Incl. VAT
JST XH 2,3,4 Pin connector Kit - 2.54mm - 100 pieces The JST XH 2,3,4 Pin Connector Kit - 2.54mm - 100 pieces offers a versatile range of connectors for various applications like power supplies, battery connections, and signal transmission. Known for their durability, secure locking mechanism, and heat resistance.
In stock
€ 6,30 Incl. VAT
Mini Pushbutton Power Switch with Reverse Voltage Protection, LV Pololu #2808 Mini Pushbutton Power Switch with Reverse Voltage Protection, LV.The Pololu Pushbutton Power Switches are sophisticated power control alternatives to bulky mechanical switches.
In stock
€ 4,45 Incl. VAT
Mini USB cable 100cm blue - 30AWG This mini USB cable of 1 meter is suitable for connecting the Arduino Nano or other peripheral equipment to the computer. This USB cable has a thick shielded jacket to protect the USB connection against external interference.
In stock
€ 2,90 Incl. VAT
0.1" (2.54mm) Crimp Connector Housing: 1x2-Pin 25-Pack Pololu #1901 These two-pin housings work with our wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and sol
In stock
€ 2,35 Incl. VAT
0.1" (2.54mm) Crimp Connector Housing: 2x2-Pin 10-Pack Pololu #1910 These 2×2-pin housings work with our wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 10.
In stock
€ 1,90 Incl. VAT
0.1" (2.54mm) Crimp Connector Housing: 2x3-Pin 10-Pack Pololu #1911 These 2×3-pin housings work with our wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 10.
In stock
€ 2,10 Incl. VAT
0.1" (2.54mm) Crimp Connector Housing: 2x4-Pin 10-Pack Pololu #1912 These 2×4-pin housings work with our wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 10.
In stock
€ 2,30 Incl. VAT
0.1" (2.54mm) Crimp Connector Housing: 2x5-Pin 5-Pack Pololu #1913 These 2×5-pin housings work with our wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 5.
In stock
€ 2,10 Incl. VAT
Stranded Wire: White, 20 AWG, 40 Feet Pololu #2659 High-quality 20 AWG flexible copper wire in white, suitable for various electronic applications. Comes on a 40-foot spool and offers better flexibility than solid wire. Spool designed with a side tab for easy storage. UL 1007 compliant.
In stock
€ 11,15 Incl. VAT
L-Bracket 37D Metalen Gearmotors (2-Pack) Pololu #1084 These aluminum gearmotor brackets let you mount Pololu’s 37D mm metal gearmotors to your project. The brackets are sold in pairs, and each bracket includes six M3 screws for securing the motor to the bracket.
In stock
€ 10,30 Incl. VAT
Snap-Action Switch with 16.3mm Roller Lever: 3-Pin, SPDT, 5A Pololu #1404 This single-pole, double-throw (SPDT) momentary switch can be used as a general-purpose micro switch or tactile bump sensor for your robot. The switch body dimension is 20.0 x 6.4 x 10.2 mm, and the 16.3mm lever arm is has a roller at the tip.
In stock
€ 2,55 Incl. VAT
Snap-Action Switch with 15.6mm Bump Lever: 3-Pin, SPDT, 5A Pololu #1405 This single-pole, double-throw (SPDT) momentary switch can be used as a general-purpose micro switch or tactile bump sensor for your robot. The switch body dimension is 20.0 x 6.4 x 10.2 mm, and the 15.6mm lever arm has a semicircular bump at the tip that simulates a roller.
In stock
€ 2,45 Incl. VAT
Pololu Aluminum Scooter Wheel Adapter for 6mm Shaft Pololu #2674 This two-part aluminum assembly mounts directly to 6 mm diameter motor output shafts like those on our 37D mm gearmotors and allows you to drive most scooter, skateboard, inline skate, and other common wheels that are compatible with popular 608 ball bearings.
In stock
€ 6,65 Incl. VAT
Ventilator 25mm 5V 2pin 25x25x7mm fan to create an airflow that keeps components cooler. This fan works on 5V and has a connector with 2 pins.
In stock
€ 4,15 Incl. VAT
3-C Battery holder Pololu #1158 This battery holder is suitable for 3 C batteries, which are slightly wider than the well-known AA batteries. With the sturdy housing, a battery can be easily clicked off and on without having to glue the battery to the project.
In stock
€ 4,10 Incl. VAT
Tumbler switch - on / off / on auto-return - 2 pieces Set of 2 switches with 3 positions that automatically spring back to the 'off' position. Ideal for motor control and other applications requiring momentary action.
In stock
€ 2,65 Incl. VAT
Desoldeer lint 1,5mm 1,5m Solder ribbon 1.5mm wide to solve soldering errors or to get components loose. This solder ribbon comes on a roll of 1.5 meter ribbon.
In stock
€ 1,65 Incl. VAT
Hook-up Wire Spool Set - 22AWG Stranded-Core - 10 x 25ft Adafruit #3175 This is a box of ten 25ft spools of stranded-core wire. Stranded-core wire is best used for wiring jigs where there's bending or movement expected. It also works well with terminal blocks. It's not great for use with breadboards (without tinning).
In stock
€ 25,60 Incl. VAT

Viewed 50 of 1820 productsShow more

Customer reviews about Material



Evelyn25X25mm 3M Double Sided Adhesive Thermal Tape - 10pcs Sticks well and seems to dissipate heat well, time will tell.
Margriet de GraafCopper Tape - 5mm (50ft) Quite narrow tape, but it works well for making a circuit (for making a Christmas card with LED light).
RademakerCopper Tape - 5mm (50ft) Great stuff
MarkCopper tape 5mm self-adhesive - 50 meters Works very well