Material

Material to build projects such as enclosures, protoboards, breadboards, cables and wiring.

1710 results Sort by

Load previous

Reduced
-50 %
Pololu Servo Extension Cable 12" Male - Female Pololu #2184 This 12-inch (300-mm), flat cable can be used to extend the leads of many common RC hobby servos. It has 22-AWG wires, and both the male and female cable ends are compatible with both JR- and Futaba-style connectors, allowing it to work in either system or as an adapter between systems.
In stock
€ 6,50 € 3,25 Incl. VAT
Reduced
-50 %
Pololu Solarbotics GM2 224:1 Gear Motor Offset Output Pololu #180 This 224:1 gearmotor (gearbox with brushed DC motor) has a low-current motor and provides power and speed that is comparable to an RC servo at a fraction of the cost.
In stock
€ 17,20 € 8,60 Incl. VAT
Reduced
-50 %
Pololu 499:1 Metal Gearmotor 25Dx58L mm LP 6V Pololu #1591 This gearmotor consists of a low-power, 6 V brushed DC motor combined with a 498.87:1 metal spur gearbox. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in diameter and extends 12.5 mm from the face plate of the gearbox.
In stock
€ 41,85 € 20,95 Incl. VAT
Reduced
-49 %
Nitto Denko Nitto - insulation tape - red - 19 mm x 20 m Nitto Denko #1045N-RPC This roll of red insulation tape is suitable for marking cables, fuses or a route for your line-follow robot. Unlike other tapes, insulating tape has no electrical conductivity.
In stock
€ 1,95 € 1,00 Incl. VAT
Reduced
-49 %
Nitto Denko Nitto - insulation tape - yellow - 19 mm x 20 m Nitto Denko #1045N-JPC This roll of yellow insulation tape is suitable for marking cables, fuses or a route for your line-follow robot. Unlike other tapes, insulating tape has no electrical conductivity.
In stock
€ 1,95 € 1,00 Incl. VAT
Reduced
-50 %
Opencircuit SN-01B Crimping Tool 20-28AWG - 0.08 / 0.5mm2 Opencircuit This crimping pliers with 0.08 / 0.5mm bits are suitable for attaching JST, Molex / dupont terminals and connectors to a wire end of 20 to 28AWG.
In stock
€ 13,55 € 6,80 Incl. VAT
Reduced
-50 %
Kitronik Smart Materials Range - Polymorph, 100g Pack Kitronik #4376 This bag (100g) of Polymorph is a very popular smart material that has Educational and practical uses. It is a thermoplastic with a low melting temperature and a long working time. Students and crafters can create a huge range of useful products, using it for decorative and practical items.
In stock
€ 6,80 € 3,40 Incl. VAT
Reduced
-50 %
Pololu 9.7:1 Metal Gearmotor 25Dx48L mm HP 12V Pololu #3202 This gearmotor consists of a high-power, 12 V brushed DC motor combined with a 9.68:1 metal spur gearbox. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in diameter and extends 12.5 mm from the face plate of the gearbox.
In stock
€ 46,05 € 23,05 Incl. VAT
Reduced
-50 %
Adafruit Break-away 0.1" 36-pin strip male header - Black - 10 pack Adafruit #392 Versatile breakaway headers for electronics, offering 36 pins with 0.1" pitch. Easily separable, stackable, and gold-plated for durability. Ideal for component connections and prototyping.
In stock
€ 6,95 € 3,50 Incl. VAT
Reduced
-50 %
Adafruit Break-away 0.1" 36-pin strip male header - Rainbow Combo 10 Pack Adafruit #4154 Pack of ten 36-pin 0.1" pitch break-away male headers in vibrant candy colors. Includes 2 each of red, yellow, white, green, and blue. Perfect for soldering, connecting, and prototyping.
In stock
€ 6,95 € 3,50 Incl. VAT
Reduced
-50 %
Pololu 12mm Hex Wheel Adapter for 6mm Shaft, Extended (2-Pack) Pololu #2687 These 35 mm long aluminum adapters convert a 6 mm diameter shaft to a 12 mm hex shaft that is compatible with many common hobby RC wheels.
In stock
€ 12,55 € 6,30 Incl. VAT
Reduced
-49 %
Pololu Nylon Spacer: 4mm Length, 4mm OD, 2.7mm ID (50-Pack) Pololu #1971 Keep your components separated with this 50-pack of 4mm-long (0.16") nylon spacers. These spacers have an outer diameter (OD) of 4 mm (0.16") and an inner diameter (ID) of 2.7 mm (0.11"), and they work with #2 and M2 screws.
In stock
€ 4,65 € 2,35 Incl. VAT
Reduced
-49 %
Pololu Nylon Spacer: 6mm Length, 4mm OD, 2.7mm ID (50-Pack) Pololu #1972 Keep your components separated with this 50-pack of 6mm-long (0.24") nylon spacers. These spacers have an outer diameter (OD) of 4 mm (0.16") and an inner diameter (ID) of 2.7 mm (0.11"), and they work with #2 and M2 screws.
In stock
€ 4,65 € 2,35 Incl. VAT
Reduced
-49 %
Pololu Nylon Spacer: 10mm Length, 4mm OD, 2.7mm ID (25-Pack) Pololu #1974 Keep your components separated with this 25-pack of 10mm-long (0.39") nylon spacers. These spacers have an outer diameter (OD) of 4 mm (0.16") and an inner diameter (ID) of 2.7 mm (0.11"), and they work with #2 and M2 screws.
In stock
€ 3,65 € 1,85 Incl. VAT
Reduced
-50 %
Pololu Magnetic Encoder Pair Kit with Side-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18V Pololu #4761 Magnetic Encoder Pair Kit with Side-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18V. Add quadrature encoders to your micro metal gearmotors (extended back shaft version required) with this kit that uses a magnetic disc and hall effect sensors to provide 12 counts per revolution of the...
In stock
€ 12,50 € 6,25 Incl. VAT
Reduced
-50 %
Pololu Magnetic Encoder Pair Kit with Top-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18V Pololu #4760 Magnetic Encoder Pair Kit with Top-Entry Connector for Micro Metal Gearmotors, 12 CPR, 2.7-18V. Add quadrature encoders to your micro metal gearmotors (extended back shaft version required) with this kit that uses a magnetic disc and hall effect sensors to provide 12 counts per revolution of the...
In stock
€ 12,55 € 6,30 Incl. VAT
Reduced
-50 %
Opencircuit GY-370 DC high torque motor - DC24V 30RPM - with square gearbox Opencircuit Metal gearmotor with worm gear transmission. The motor has a speed of 30 RPM and can be powered by 24V.
In stock
€ 10,55 € 5,30 Incl. VAT
Reduced
-49 %
Cytron Cable Cover and Management Sleeve 16mm 1 meter Cytron #WR-CC-16MM Cable Cover and Management Sleeve 16mm 1 meter ease you to keep your electronics cable or wires to be more tidied,managed and protected.
In stock
€ 2,25 € 1,15 Incl. VAT
Reduced
-50 %
Velleman Connector set for low voltage applications - including storage box Velleman #VCS200 Assemble your own connectors with the Velleman Connectors Set for Low-Voltage Applications. Includes a variety of connectors, heat shrink tubes, and a handy storage box.
In stock
€ 22,95 € 11,50 Incl. VAT
Reduced
-49 %
Cytron PC104 Header Pin (2x20) Cytron #CN-PH-PC104 2X20 bus connector that compatible with PC/104 industry standard designed for stacking boards with a common bus.
In stock
€ 2,05 € 1,05 Incl. VAT
Reduced
-50 %
Opencircuit Magnet tape, 750 x 25 x 2mm Opencircuit #56471 Very handy magnetic tape for attaching all kinds of small parts to different surfaces. The self-adhesive magnetic tape is 75 cm long, and can easily be shortened to any desired length.
In stock
€ 3,00 € 1,50 Incl. VAT
Sale
-90 %
McPower Mirror tool, telescope 16-70cm, Ø mirror 50mm McPower #1533539 The McPower Mirror Tool with telescope function is ideal for inspections in hard-to-reach places. The telescope has a range of 16-70cm and a 50mm mirror. It's compact and lightweight, perfect for professionals.
In stock
€ 3,35 € 0,35 Incl. VAT
Reduced
-54 %
Cytron Push Button Panel Mount 12MM with Wire (20cm) Cytron #SW-PBM-12R-W OK, this item is pretty simple yet practical - it's a panel mount pushbutton with red button on top, no LEDs, no bells & whistles.
In stock
€ 0,65 € 0,30 Incl. VAT
Reduced
-50 %
Opencircuit Ventilator 40x20mm 24V 2pin - glijlager Opencircuit 40x40mm fan to create an airflow that keeps components cooler. This fan runs on 24V and has a connector with 2 pins.
In stock
€ 3,70 € 1,85 Incl. VAT
Reduced
-50 %
Kitronik Heat Shrink Mini Reel - 1.6mm, 12 meter Kitronik #2431 This handy real of heat shrink has 12 meter of heat shrink with a thickness of 1,6mm. It shrinks to around half the size when heated.
In stock
€ 15,10 € 7,55 Incl. VAT
Reduced
-50 %
Kitronik Heat Shrink Mini Reel - 2.4mm, 11 meter Kitronik #2432 This handy real of heat shrink has 11 meter of heat shrink with a thickness of 2,4mm. It shrinks to around half the size when heated.
In stock
€ 16,20 € 8,10 Incl. VAT
Reduced
-50 %
Kitronik :MOVE Motor Klaw Kit Kitronik #5696 The :MOVE Motor Klaw provides a fun and easy to install addition to the Kitronik :MOVE Motor buggy for microbit. It has been carefully designed to have the ability to fit both vertically and horizontally with one bolt. Included are two types of Klaw attachments for each of these builds.
In stock
€ 11,30 € 5,65 Incl. VAT
Reduced
-50 %
Cytron Raspberry PI 4 Heatsink Set (3pcs) Black Cytron #HD-HS-RPI4-3B Raspberry Pi is a Single Board Computer that can run many programs and it has many applications. It too will heat up when the processor is running like any other computer motherboard and will heat up very fast during full operation or overlocked.
In stock
€ 2,50 € 1,25 Incl. VAT
Reduced
-50 %
Opencircuit Female header 20 pin - 2.54mm - 5 stuks Opencircuit This set of 5 female headers with 20 pins and a 2.54 mm pitch is perfect for those looking for versatile and reliable connection options for electronic projects. They are compatible with standard breadboards.
In stock
€ 2,50 € 1,25 Incl. VAT
Reduced
-49 %
Sparkfun Teensy Stackable Header Kit (Extended) Sparkfun #PRT-17152 Boost your Teensy 4.1, 3.6, or 3.5 development board's functionality with our Teensy Stackable Header Kit (Extended). Ideal for prototyping, circuit development, and promoting organized workspace. Compatible with various Teensy boards.
In stock
€ 2,55 € 1,30 Incl. VAT
Reduced
-49 %
Opencircuit Print terminal blocks 4 pole green - 2.54mm pitch - 5 pieces Opencircuit This set of 5 green terminal blocks with 4 connection points and a 2.54mm pitch is perfect for standard experimental boards and breadboards. They offer a strong connection with wire sizes ranging from 14 to 22 AWG.
In stock
€ 3,35 € 1,70 Incl. VAT
Reduced
-50 %
DFRobot TT Geared Motor with Back Shaft (160rpm 6v L Shape) DFRobot #FIT0016 This is a TT Micro DC Geared Motor with Back Shaft working at 6V with 160rpm. The TT motor series the most popular DC motors for DIY enthusiasts. It is designed to easily incorporate the DFRobot Encoder.
In stock
€ 4,90 € 2,45 Incl. VAT
Reduced
-50 %
Velleman Thermo-electric pellet coil module 6A 15.4V 67 ° Velleman #PELTIER2 This peltier module has a maximum current of 6A with a voltage of 15.4V. Thermoelectric Peltier modules use electricity to create a temperature difference between the two ceramic sides.
In stock
€ 12,10 € 6,05 Incl. VAT
Reduced
-50 %
Velleman Thermo-electric pellet coil module 3A 15.4V 65 ° Velleman #PELTIER1 Thermoelectric Peltier modules use electricity to create a temperature difference between the two ceramic sides. One side gets cold and the other gets hot when powered.
In stock
€ 12,10 € 6,05 Incl. VAT
Reduced
-50 %
Sparkfun Flexible Qwiic Cable - 50mm Sparkfun #PRT-17260 Get the Sparkfun Flexible Qwiic Cable, a 50mm 4-conductor cable designed for Qwiic components. Its highly flexible insulation makes it adaptable for various applications. Color-coded wires for easy setup.
In stock
€ 2,20 € 1,10 Incl. VAT
Sale
-50 %
Chibitronics Love to Code: Chibi Scope & Alligator Clips Chibitronics #T001 CT-LTC-SCOPE The Chibi Scope is a tiny screen designed to help you understand what’s going on inside your Chibi Chip. It’s an essential tool for educators, and for intermediate and above coders.
In stock
€ 50,80 € 25,40 Incl. VAT
Reduced
-49 %
Opencircuit 25X25mm 3M Double Sided Adhesive Thermal Tape - 10pcs Opencircuit Double sided adhesive tape for heatsinks and cooling fins. The tape is pre-cut in squares of 25mm X 25mm with a thickness of 0.15mm.
In stock
€ 2,25 € 1,15 Incl. VAT
Reduced
-50 %
DFRobot Gravity: Vibration Motor Module For Arduino DFRobot #DFR0440 Have you ever wondered how to implement a vibration motor in your project, like you would find in a mobile phone?
In stock
€ 3,50 € 1,75 Incl. VAT
Reduced
-50 %
DFRobot Gravity: Digital Crash Sensor (Right) DFRobot #SEN0138-R A miniature snap-action switch (right lever), also trademarked and frequently known as a micro switch, is an electric switch that is actuated by very little physical force.
In stock
€ 2,80 € 1,40 Incl. VAT
Reduced
-49 %
Kitronik Electro-Fashion, Switched Coin Cell Holder - CR2032 Kitronik #2711 This specially designed e-textiles coin cell holder from Kitronik has large connection points for the conductive thread. These are clearly marked to show the battery polarity.
In stock
€ 1,85 € 0,95 Incl. VAT
Reduced
-49 %
Kitronik Sewable Miniature Coin Cell Holder - CR1220 Kitronik #2718 This specially designed coin cell holder has large connection points for the conductive thread. These are clearly marked to show the battery polarity.Contents:1 x Sewable Miniature Coin Cell Holder.
In stock
€ 1,95 € 1,00 Incl. VAT
Reduced
-50 %
Kitronik Electro-Fashion, Light Sensing Coin Cell Holder Kitronik #2721 This board allows LEDs to be turned on automatically when it is dark. On one side of the board is the coin cell holder, which takes a CR2032 coin cell as well as a small on-off slide switch. On the other side of the board is the light sensor.
In stock
€ 4,70 € 2,35 Incl. VAT
Reduced
-50 %
Opencircuit Female-Female 2.54 to 2.0mm ribbon cable - 20cm - 40 pieces Opencircuit These jumper wires have a twist! Instead of going from 0.1 "/ 2.54mm pitch headers to breadboard or something, these are 2.54mm to 2.0mm!
In stock
€ 3,20 € 1,60 Incl. VAT
Reduced
-51 %
Opencircuit DC Plug male + female set - 5.5mm x 2.1mm to crown stone Opencircuit This DC Plug adapter set comes with a male and female connector of 5.5mm x 2.1mm. The adapter extends to a terminal block, to which wires can easily be attached.
In stock
€ 2,45 € 1,20 Incl. VAT
Reduced
-49 %
Opencircuit Button with led - Red - momentary - metal 16mm Opencircuit Metal button with a mounting diameter of 16mm. This button has a red LED illuminated ring, which works on 12V via a separate circuit. In addition to the 2 LED connections, this button has 3 contact points, NO, Common and NC.
In stock
€ 4,95 € 2,50 Incl. VAT
Reduced
-49 %
Opencircuit Button with LED - Green - locking - metal 16mm Opencircuit Metal button with a mounting diameter of 16mm. This button has a green LED illuminated ring, which works on 12V via a separate circuit. In addition to the 2 LED connections, this button has 3 contact points, NO, Common and NC.
In stock
€ 4,65 € 2,35 Incl. VAT
Sale
-49 %
Opencircuit Button with LED - Red - locking - metal 16mm Opencircuit Metal button with a mounting diameter of 16mm. This button has a red LED illuminated ring, which works on 12V via a separate circuit. In addition to the 2 LED connections, this button has 3 contact points, NO, Common and NC.
In stock
€ 2,45 € 1,25 Incl. VAT
Reduced
-49 %
Opencircuit Button with led - White - locking - metal 16mm Opencircuit Metal button with a mounting diameter of 16mm. This button has a white LED illuminated ring, which works on 12V via a separate circuit. In addition to the 2 LED connections, this button has 3 contact points, NO, Common and NC.
In stock
€ 4,55 € 2,30 Incl. VAT
Reduced
-50 %
Opencircuit Ferrite clamp 3.5mm suppression filter Opencircuit Ferrite suppression filter with clamp mechanism for clamping on a (data) cable of maximum 3.5 mm. The filter ensures that the device receives less interference from external sources, such as wireless transmitters.
In stock
€ 2,10 € 1,05 Incl. VAT
Reduced
-49 %
Opencircuit Ferrite clamp 7mm suppression filter Opencircuit Ferrite suppression filter with clamp mechanism for clamping on a (data) cable of maximum 7mm. The filter ensures that the device receives less interference from external sources, such as wireless transmitters.
In stock
€ 2,35 € 1,20 Incl. VAT

Viewed 50 of 1710 productsShow more

Customer reviews about Material



Margriet de GraafSparkfun Copper Tape - 5mm (50ft) Quite narrow tape, but it works well for making a circuit (for making a Christmas card with LED light).
EvelynOpencircuit 25X25mm 3M Double Sided Adhesive Thermal Tape - 10pcs Sticks well and seems to dissipate heat well, time will tell.
RademakerSparkfun Copper Tape - 5mm (50ft) Great stuff