Material

Material to build projects such as enclosures, protoboards, breadboards, cables and wiring.

1948 results Sort by

Load previous

Reduced
-40 %
Opencircuit Print terminal block 2 pole blue - 5.12mm pitch - 10 pieces Opencircuit This set of 10 blue terminal blocks with 2 connection points and a 5.12mm pitch is specifically designed for standard experimental boards. They offer a strong and reliable connection with wire sizes ranging from 14 to 22 AWG.
In stock
€ 2,50 € 1,50 Incl. VAT
Reduced
-39 %
Opencircuit 433MHz RF Antennas - 5 pcs Opencircuit A set of 5 pieces of 433MHz RF antennas. These antennas are designed to boost the signal on the 433MHz band with a gain of 2.15dBi. They are ideal for wireless communication projects and other applications requiring a stronger signal.
In stock
€ 2,80 € 1,70 Incl. VAT
Reduced
-40 %
Opencircuit USB 2.0 male connectors - 5 pcs Opencircuit This set of 5 USB 2.0 male connectors is ideal for making your own USB cables. They are user-friendly and ensure reliable data and power transmission. Convenient for multiple electronic projects.
In stock
€ 2,25 € 1,35 Incl. VAT
Reduced
-40 %
Opencircuit Ventilator 25mm 12V 2pin Opencircuit 25x25x10mm fan to create an airflow that keeps components cooler. This fan works on 12V and has a connector with 2 pins.
In stock
€ 3,65 € 2,20 Incl. VAT
Reduced
-39 %
Opencircuit Project box - white - 47x37x18mm Opencircuit Plastic housing with the dimensions 47x37x18mm. This housing has a white color and is suitable to conceal a switch or other small electronics.
In stock
€ 2,70 € 1,65 Incl. VAT
Reduced
-40 %
Opencircuit Project box - black - 47 x 37 x 18mm Opencircuit This black plastic housing measuring 46x35.20x18mm is specifically designed to neatly and safely store a switch or other small electronic components.
In stock
€ 2,75 € 1,65 Incl. VAT
Reduced
-41 %
Opencircuit 4x AA battery holder with switch Opencircuit This is a battery holder for 4x AA batteries. This battery holder has an on / off switch. With the sturdy housing, a battery can be easily clicked off and on without having to glue the battery to the...
In stock
€ 2,20 € 1,30 Incl. VAT
Reduced
-40 %
Pololu Sanyo Pancake Stepper Motor: Bipolar, 200 Steps/Rev, 3.5V, 1 A/Phase Pololu #2298 This pancake bipolar stepping motor from Sanyo has a 1.8° step angle (200 steps/revolution). Each phase draws 1 A at 3.5 V, allowing for a holding torque of 850 g-cm (12 oz-in). The motor has four color-coded wires terminated with bare leads: red and yellow connect to one coil.
In stock
€ 104,95 € 63,00 Incl. VAT
Reduced
-40 %
Opencircuit Mini USB cable 50 cm blue Opencircuit This mini USB cable is suitable for connecting the Arduino Nano or other peripheral equipment to the computer. This USB cable has a thick shielded jacket to protect the USB connection against external interference.
In stock
€ 3,00 € 1,80 Incl. VAT
Reduced
-38 %
Opencircuit IC socket 20 pins - 10 pieces Opencircuit Set of 10 plastic feet for ICs with 20 pins. Simple and practical for installing integrated circuits in your projects, without complications.
In stock
€ 1,30 € 0,80 Incl. VAT
Reduced
-40 %
Opencircuit IC socket 18 pins - 10 pcs Opencircuit Boost your electronics projects with our set of 10 pieces 18-pin IC sockets. Secure and stable connections guaranteed. Ideal for microcontroller projects, prototyping, repair, DIY electronics and more. Durable, reliable and easy to install. Get your essential components now!
In stock
€ 1,75 € 1,05 Incl. VAT
Reduced
-40 %
Opencircuit Experiment print 3x7cm double-sided - 5 pieces Opencircuit A set of 5 handy experimental prints of 3x7cm that are etched on both sides. Because the prints can connect on both sides, it is very easy to make connections. The prints have 24 x 10 holes with 8 pads on both sides (not connected).
In stock
€ 2,85 € 1,70 Incl. VAT
Reduced
-40 %
Opencircuit Aluminum heatsink 25x25x5mm - 5 pieces Opencircuit This set includes 5 aluminium heatsinks with dimensions of 25 x 25 x 5 mm. These heatsinks are perfect for cooling various electronic components. They are made from high-quality aluminium for optimal heat dissipation. Note: these heatsinks are not self-adhesive and do not have a sticky strip, so you'll need to use another method for attachment.
In stock
€ 2,65 € 1,60 Incl. VAT
Reduced
-39 %
Opencircuit Desoldeer lint 3,0mm 1,5m Opencircuit 3.0mm wide solder ribbon. This soldering ribbon is extremely suitable for soldering soldering errors or to get components loose.
In stock
€ 3,60 € 2,20 Incl. VAT
Reduced
-40 %
Opencircuit Aluminum heatsink 100x20x6mm - 2 pieces Opencircuit This is a set of 2 aluminum heatsinks with dimensions of 100 x 20 x 6mm. These larger heatsinks are designed to effectively lower the temperature of electrical components. They achieve this by spreading the generated heat over a larger surface area, thereby extending the lifespan and reliability of the components.
In stock
€ 2,50 € 1,50 Incl. VAT
Reduced
-39 %
Opencircuit DC Plug angle male 2.1x5.5mm - 5 pieces Opencircuit This set includes 5 DC Plug connectors specifically designed with a 90-degree angle, offering unique flexibility when connecting your devices. The plugs have dimensions of 2.1mm x 5.5mm, ensuring a reliable and consistent fit.
In stock
€ 2,80 € 1,70 Incl. VAT
Reduced
-40 %
Opencircuit Alligator Clips 28mm - 5x Red and 5x Black Opencircuit Set of 10 alligator clips (5x black, 5x red) measuring 28mm, with insulated handles. Ideal for making electrical connections.
In stock
€ 2,40 € 1,45 Incl. VAT
Reduced
-40 %
Opencircuit Double Sided Prototyping PCB 6x8cm - 2 pieces Opencircuit A very handy prototyping PCB of 6x8cm which is fully plated at both sides. The print has 21 x 27 holes with 18 pads on both sides (not electrically connected). The thickness of the PCB is 1.2mm.
In stock
€ 3,25 € 1,95 Incl. VAT
Reduced
-41 %
Opencircuit Female JST connector with 100mm wire - 5 pieces Opencircuit This set of 5 female JST connectors with a 100mm wire length is ideal for projects involving rechargeable battery packs, 3D printers, and servos. They offer a reliable and durable connection.
In stock
€ 2,70 € 1,60 Incl. VAT
Reduced
-40 %
Opencircuit Tumbler switch illuminates 12V 20A - Blue Opencircuit Tumbler switch with blue lighting and a maximum load of 12V / 20A. The switch has a built-in diameter of 11.5 mm and a hard plastic housing.
In stock
€ 2,60 € 1,55 Incl. VAT
Reduced
-41 %
Opencircuit Tumbler switch illuminates 12V 20A - Red Opencircuit Tumbler switch with red lighting and a maximum load of 12V / 20A. The switch has a built-in diameter of 11.5 mm and a hard plastic housing.
In stock
€ 2,45 € 1,45 Incl. VAT
Reduced
-38 %
Opencircuit Tumbler switch illuminates 12V 20A - Yellow Opencircuit Tumbler switch with yellow lighting and a maximum load of 12V / 20A. The switch has a built-in diameter of 11.5 mm and a hard plastic housing.
In stock
€ 2,60 € 1,60 Incl. VAT
Reduced
-40 %
Opencircuit Micro USB to dip adapter 5pin Opencircuit This is a micro USB to dip adapter. This adapter is suitable for 5 pins and a pin spacing (pitch) of 2.54mm.
In stock
€ 2,40 € 1,45 Incl. VAT
Reduced
-40 %
Opencircuit Female USB 3.0 naar dip adapter 9pin Opencircuit This is a female USB 3.0 to dip adapter. This adapter is suitable for 9 pins and a pin distance (pitch) of 2.54mm.
In stock
€ 2,90 € 1,75 Incl. VAT
Reduced
-40 %
Opencircuit PVC Hose 6mm transparent - 2 meters - including clamp Opencircuit This hose has an outer diameter of 6mm and an inner diameter of 4mm. The hose is made of strong and flexible PVC with a transparent color.
In stock
€ 3,65 € 2,20 Incl. VAT
Reduced
-40 %
Opencircuit Female header 40 pin - 1.27mm - 5 stuks Opencircuit Set of 5 female headers with 40 pins and a pin spacing of 1.27 mm, suitable for various electronic applications.
In stock
€ 3,50 € 2,10 Incl. VAT
Reduced
-39 %
Opencircuit Female header 2x5 pin - 2.54mm - 10 pcs Opencircuit This set of 10 female headers with 2x5 pins and a 2.54 mm pitch is an excellent choice for various electronic projects. They are compatible with standard breadboards and ensure a reliable and stable connection.
In stock
€ 2,20 € 1,35 Incl. VAT
Reduced
-40 %
Opencircuit Tactile buttons SMD 3x6x2.5mm - 25 pieces Opencircuit A set of 25 tactile SMD buttons. The dimensions are: 3mm x 6mm x 2.5mm. These are SMD push buttons, which means that they can be soldered directly onto the surface of the PCB, so without wires or...
In stock
€ 2,15 € 1,30 Incl. VAT
Reduced
-40 %
Opencircuit Brass M3 standoff 40mm + 6mm - 10 pieces Opencircuit Protect your PCBs with this set of 10 brass standoffs featuring M3 threading, each measuring 40mm in length with 6mm of threading.
In stock
€ 3,75 € 2,25 Incl. VAT
Reduced
-40 %
Opencircuit 3.7V lipo battery protection board Opencircuit Small board to protect lithium batteries (3.7V) against complete discharge, short circuit and extracting too much current (3A).
In stock
€ 2,50 € 1,50 Incl. VAT
Reduced
-39 %
Opencircuit Rocker switch 12V round with blue lamp Opencircuit Rocker on-off button in round version with built-in blue lamp. This switch has a built-in diameter of 20 mm and an outer diameter of 23 mm.
In stock
€ 2,70 € 1,65 Incl. VAT
Reduced
-39 %
Opencircuit Fuse holder with wire (22AWG) Opencircuit Fuse holder with 10 cm (22AWG) wire on both sides. The fuse holder is suitable for glass 5x20mm fuses with a maximum break-through current of 15A.
In stock
€ 2,80 € 1,70 Incl. VAT
Reduced
-40 %
Opencircuit Experiment print 7x9cm - 5 pieces Opencircuit Set of 5 single-sided prototyping boards with 744 pads and a 30-block grid. Ideal for quick prototyping, component testing, and small-scale projects.
In stock
€ 3,10 € 1,85 Incl. VAT
Reduced
-39 %
Opencircuit 5V 160mA solar panel Opencircuit Solar panel with a voltage of max 5V and a current of max 160mA. This panel has a maximum power of 0.8W.
In stock
€ 4,45 € 2,70 Incl. VAT
Reduced
-39 %
Opencircuit 9V battery holder with switch Opencircuit This 9V battery holder contains a built-in switch to connect the connected circuit of the battery. The housing is made of sturdy plastic with a lid that can be slid over the battery for a seamless...
In stock
€ 2,80 € 1,70 Incl. VAT
Reduced
-40 %
Opencircuit 6 x AA battery holder DC plug - 9V Opencircuit This 6 x AA (9V) plastic battery holder has a 2.1mm DC plug connector of 24cm long. With the sturdy housing, a battery can be easily clicked off and on without having to glue the battery to the...
In stock
€ 2,75 € 1,65 Incl. VAT
Reduced
-39 %
Opencircuit IC Female header 40 pin 2,54mm - 5 stuks Opencircuit Set of 5 Female IC headers with 40 pins and a pin spacing of 2.54 mm. Breakable per pin for flexible applications. Not compatible with standard male/female headers.
In stock
€ 3,60 € 2,20 Incl. VAT
Reduced
-40 %
Opencircuit Crown stone strip 10A - 5 pieces Opencircuit A set of 5 terminal block strips. There are 12 connections of 10A on the terminal block strip, which can be removed from the strip per piece. Suitable for various wire diameters and temperatures.
In stock
€ 4,05 € 2,45 Incl. VAT
Reduced
-39 %
Opencircuit Female headers angled 40 pin 2.54mm - 5 pieces Opencircuit This set of 5 right-angle female headers with 40 pins and a 2.54 mm pitch is ideal for various electronic projects. They are compatible with standard breadboards and offer extra flexibility thanks to their right-angle design.
In stock
€ 2,95 € 1,80 Incl. VAT
Reduced
-40 %
Opencircuit Solenoid slot 6V Opencircuit This electromagnetic (solenoid) push-pull switch works on 6V with a current of up to 1A. This solenoid contains a pin which is retracted about 10 mm when voltage is applied. The pulling force is around 1500 grams.
In stock
€ 8,20 € 4,95 Incl. VAT
Reduced
-40 %
FEETECH Ultra-High-Torque, High-Voltage Digital Giant Servo FT5335M Feetech #FT5335M The FEETECH FT5335M servo is all about torque. This 1/4-scale digital servo can deliver an incredible 550 oz-in of torque at 7.4 V or 480 oz-in at 6 V thanks to its powerful motor and all-metal gear train. The FT5335M is a high-voltage servo, offering an operating voltage range of 6 V to 7.4 V.
In stock
€ 79,80 € 47,90 Incl. VAT
Reduced
-40 %
Opencircuit Dupont wire kit 310 delig Opencircuit The Dupont Wire Kit - 310 pieces is a comprehensive set of Dupont terminals for creating custom jumper cables. Suitable for 18-26AWG wires, it includes a variety of pin configurations and comes neatly packed in a plastic storage box.
In stock
€ 5,50 € 3,30 Incl. VAT
Reduced
-39 %
Opencircuit Tumble switch - On / On - 5 pieces Opencircuit This set includes 5 toggle switches specifically designed for versatile use. The switches are of the on-on type and have two positions: On (p1) and On (p3). They are ideal for various applications where you want to control the power supply without completely turning it off. With a maximum rating of 6A and 125VDC, these switches are robust and reliable.
In stock
€ 3,20 € 1,95 Incl. VAT
Reduced
-39 %
Pololu 0.1" (2.54mm) Crimp Connector Housing: 1x5-Pin 10-Pack Pololu #1904 These five-pin housings work with our wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 10.
In stock
€ 2,85 € 1,75 Incl. VAT
Reduced
-40 %
Opencircuit Tactile buttons 6x6x6mm - SMD - 25 pieces Opencircuit Set of 25 tactile buttons measuring 6x6x6mm with SMD footprint. Suitable for surface mounting and various electronic projects.
In stock
€ 2,85 € 1,70 Incl. VAT
Reduced
-40 %
Adafruit Stacking Headers for Feather - 12-pin and 16-pin female headers Adafruit #2830 Transform your Feather board into a versatile prototyping powerhouse with these two female stacking headers, enabling easy breadboard attachment and additional top circuitry.
In stock
€ 1,75 € 1,05 Incl. VAT
Reduced
-41 %
Opencircuit Mini USB 2.0 cable male connector - 5 pieces Opencircuit This set of 5 male mini USB connectors is perfect for creating your own custom-length USB cables. They are easy to use and ensure reliable data and power transmission. Suitable for multiple electronic projects.
In stock
€ 2,30 € 1,35 Incl. VAT
Reduced
-40 %
Pololu Mini MOSFET Slide Switch with Reverse Voltage Protection, LV Pololu #2810 This breadboard-compatible module is an alternative to bulky power switches. It uses a small integrated slide switch to control a high-side power MOSFET that can deliver continuous currents up to around 6 A at 2 V to 20 V.
In stock
€ 5,75 € 3,45 Incl. VAT
Reduced
-40 %
Adafruit JST-PH 2-Pin SMT Right Angle Breakout Board Adafruit #1862 This 2-pin connector on a breakout board ensures seamless integration for projects. Compatible with JST PH 2-pin, it pairs with multiple power sources, enhancing versatility and simplifying assembly.
In stock
€ 2,25 € 1,35 Incl. VAT
Reduced
-39 %
Itead Sonoff - IP66 Waterproof Case Itead #IM171017001 This IP66 waterproof housing is made of ABS plastic and has a transparent window. The housing is suitable for Sonoff, Sonoff RF, Sonoff POW, Sonoff TH16, Sonoff TH10, Sonoff Dual and Sonoff G1.
In stock
€ 5,95 € 3,60 Incl. VAT

Viewed 50 of 1948 productsShow more

Customer reviews about Material



Margriet de GraafSparkfun Copper Tape - 5mm (50ft) Quite narrow tape, but it works well for making a circuit (for making a Christmas card with LED light).
RademakerSparkfun Copper Tape - 5mm (50ft) Great stuff
EvelynOpencircuit 25X25mm 3M Double Sided Adhesive Thermal Tape - 10pcs Sticks well and seems to dissipate heat well, time will tell.
MarkOpencircuit Copper tape 5mm self-adhesive - 50 meters Works very well

Material

Customer reviews about Material

Recently viewed items