Electronics
Electronic components, sensors and independent modules for making circuits. Modules Resistors IC controllers Lighting Capacitors Transistors Protection components Diodes Binary ICs Potentiometers Sensors Sound Inductors Voltage regulators Oscillators Microcontrollers Fluid Control
2578 results Sort by
- Opencircuit 1N4003 200V 1A Rectifier diode - 50 stuks A set of 50 1N4003 rectifier diodes with a maximum forward voltage of 200V and a maximum current of 1A. Suitable for various applications such as voltage regulation and rectification in electronic circuits.Delivered in 14 to 30 days€ 3,00 Incl. VAT
- Opencircuit 1N4148 75V 300mA Small signal diode - 50 stuks This is a set of 50x 1N4148 small signal diodes with a maximum forward voltage of 75V and a maximum current of 300mA.Delivered in 14 to 30 days€ 2,60 Incl. VAT
- Opencircuit 10 to 6 pin USBASP adapter Annoying that the programmer has 10 pins, while the Arduino boards only have 6 pins! That leads to a lot of loose wires and faulty connections. This 10 to 6 pin adapter for the USBASP avr programmer is guaranteed to solve this problem.Delivered in 14 to 30 days€ 1,30 Incl. VAT
- Opencircuit 5mm plastic LED clip - 25 pcs This 5mm LED holder ensures a sleek finish to your project. With this bezel, status LEDs look much better because there are no unevenness or spaces visible around the seams of the LED. The LED holders are shipped as a set of 25 pieces.Delivered in 14 to 30 days€ 2,15 Incl. VAT
- Opencircuit RGB 5mm diffuse led - common anode - 10 stuks A set of 10 pcs 5mm RGB LEDs with common anode (+). These LEDs can be connected to 3 different colors (Red, Green, Blue). When several light colors are connected at the same time, they will mix so that every possible color can be emitted with these LEDs.Delivered in 14 to 30 days€ 1,40 Incl. VAT
- Opencircuit HX711 weeg sensor module dual channel The module uses the hx711 as a controller, a 24-bit S / D converter chip that has been specially designed for digital scales. One or two weight sensors belong to this module, which transmit a variable resistance depending on the weight.Delivered in 14 to 30 days€ 1,75 Incl. VAT
- Opencircuit DS18B20 Temperature sensor probe 1 meter This is not just a sensor, but a digital sensor! This temperature sensor based on the DS18B20 can easily be read through the single wire interface (comparable to I2C). The probe is waterproof and has a cable of 1 meter long.Delivered in 14 to 30 days€ 1,95 Incl. VAT
- Opencircuit S50 RFID tokens 13.56MHz - 5 pcs This set includes 5 RFID tokens operating at 13.56Mhz, each with a keychain and in a blue color. The tokens are rewritable and waterproof, making them highly suitable for access control, identification, and other security applications.Delivered in 14 to 30 days€ 3,65 Incl. VAT
- Opencircuit 650nm 5mW Laser diode - 2 pieces Opencircuit #OPC-LASER 6mm laser diodes with a wavelength of 650nm (red). This diode generates a laser of approximately 5mW.Delivered in 14 to 30 days€ 1,75 Incl. VAT
- Opencircuit 74HC595 8-bit serial input, serial or parallel output shift register DIP16 - 5 pieces This set of 5 pieces of 74HC595 shift registers in DIP16 format is an excellent choice for enhancing the I/O functionalities of your microcontroller, allowing you to control more devices without the need for extra pins.Delivered in 14 to 30 days€ 3,00 Incl. VAT
- Opencircuit TCRT5000 Infrared line detection module This line detection module uses the TCRT5000 (emitter and detector combo) to detect the reflection of a material at a distance of 0 to 3 cm. This module provides both analog and digital output for easy use. Both a supply voltage of 3.3 V and 5 V are suitable for this module.Delivered in 14 to 30 days€ 1,40 Incl. VAT
- Opencircuit LP2950-3,3V LDO Voltage regulator 3.3V 100mA - 5 pcs This set of 5x LP2950-3.3V voltage regulators in TO-92 casing converts input voltages from 4V to 29V into a stable 3.3V. Suitable for various applications such as small DIY projects and sensors.Delivered in 14 to 30 days€ 2,70 Incl. VAT
- Opencircuit 2KG weighing sensor This sensor of approximately 8 centimeters makes it possible to measure weight or pressure in combination with the HX711 weighing sensor module.Delivered in 14 to 30 days€ 3,50 Incl. VAT
- Opencircuit Microphone 6mm with 2 pins - 5 pcs This set includes 5 small microphones with a diameter of 6mm. They have a sensitivity of -46 dB and can be powered with a voltage between 2V and 10V. These microphones are perfect for voice recognition, sound recording, and other audio-related projects.Delivered in 14 to 30 days€ 2,90 Incl. VAT
- Opencircuit 5V Relay module 16 channels This 16 channel relay module can be used to safely switch on and off 16 separate channels. This gives you control over other circuits or devices, without the risk of the arduino being damaged or dangerous situations arising.Delivered in 14 to 30 days€ 8,85 Incl. VAT
- Opencircuit 3W RGD Power LED This 3W RGB power LED is perfect for a variety of lighting projects, offering a wide range of colors and a broad 120° beam angle. Each of the three colors has its own specifications, providing a versatile light source for your projects.Delivered in 14 to 30 days€ 1,45 Incl. VAT
- Opencircuit CNC Shield v3 The CNC Shield v3 is made for the control of 3D printers, milling and engraving machines. This shield fits the Arduino UNO. This board has 4 sockets for the installation of a stepper motor driver, such as the A4988. Only 2 channels per motor are required to control this motor.Delivered in 14 to 30 days€ 3,25 Incl. VAT
- Opencircuit NodeMcu v3 Lua ESP-12E WIFI Development Board The NodeMcu is an open-source board with inbuilt ESP-12E WIFI module. This is not a weakling like the Arduino's, with 512kb of memory and a processor at 40Mhz there is not a shortage of sources. This sign is extremely suitable for starting IoT (Internet of Things) applications.Delivered in 14 to 30 days€ 5,50 Incl. VAT
- Opencircuit GP2Y1010AU0F dust sensor module The GP2Y1010AU0F dust sensor module measures the number of dust particles in the air with a sensitivity of 0.1mg / M3.Delivered in 14 to 30 days€ 6,10 Incl. VAT
- Opencircuit 9-DOF (gyroscope, accelerometer, magnetometer) module This compact 9DOF (degrees of freedom) board contains 3 sensors to measure speed, rotation and the magnetic poles. This module is very useful for balancing robots, helicopters or even quadcopters. It is also possible to simulate the functionality comparable to the Wii mote.Delivered in 14 to 30 days€ 11,25 Incl. VAT
- Opencircuit 4x4 Button keypad Keypad with 4x4 buttons and a beautiful plastic frame. This keypad is very suitable for finishing a project with 4 screw holes for mounting. The input can be read with the middle 8 pins, the first 4 for the selected row and the last 4 for the selected column.Delivered in 14 to 30 days€ 3,40 Incl. VAT
- Opencircuit ENC28J60 Ethernet Shield for the Arduino Nano Ethernet Shield for the Arduino Nano based on the ENC28J60 controller. Handy for a very compact web server.Delivered in 14 to 30 days€ 7,75 Incl. VAT
- Opencircuit L7809 Voltage regulator 9V 750mA - 5 pcs The L7809 is a simple 3-pin voltage regulator with a TO220 housing. The IC can supply up to 750mA and is suitable for a wide range of input voltages. The voltage regulator brings an input voltage between 11V and 35V to a constant 9V output.Delivered in 14 to 30 days€ 2,65 Incl. VAT
- Opencircuit Radar motion detection sensor module, 3.3V - 20V This economical and highly sensitive motion detection module uses the doppler effect to detect motion. Unlike the PIR sensor, this sensor is not that easy to fool. At a frequency of 5.8 GHz, signals are transmitted in 360 degrees, which are reflected back ...Delivered in 14 to 30 days€ 5,30 Incl. VAT
- Opencircuit MCP2551 CAN Bus interface module A controller area network (CAN bus) is a communication standard, mainly developed for communication between all microcontrollers in the car. This module can send and receive data on this network by means of serial commands.Delivered in 14 to 30 days€ 4,75 Incl. VAT
- Opencircuit 50KG weighing sensor This 34 millimeter sensor makes it possible to measure weight or pressure in combination with the HX711 weighing sensor module.Delivered in 14 to 30 days€ 4,20 Incl. VAT
Customer reviews about Electronics
Recently viewed items
