Platforms
Platforms are a family of microcontrollers, sensors and accessories that work together seamlessly. Shelly Stemma Arduino AI hardware BBC micro:bit Gravity LattePanda NodeMCU Qwiic Atmel SAM TTGO Raspberry Pico STM32 Sonoff Raspberry PI FeatherWing Teensy WeMos
1339 results Sort by
- Opencircuit Digispark Opencircuit The digispark is the unofficial brother of the Arduino, who was helped out into the world via kickstarter. This small board contains only a voltage regulator and an Attiny85 as a microcontroller. This module can be plugged directly into a computer and programmed with the Arduino IDE.Delivered in 14 to 30 days€ 5,20 Incl. VAT
- Opencircuit NodeMcu v3 Lua ESP-12E WIFI Development Board Opencircuit The NodeMcu is an open-source board with inbuilt ESP-12E WIFI module. This is not a weakling like the Arduino's, with 512kb of memory and a processor at 40Mhz there is not a shortage of sources. This sign is extremely suitable for starting IoT (Internet of Things) applications.Delivered in 14 to 30 days€ 5,50 Incl. VAT
- Opencircuit STM32 ARM development board STM32F103C8T6 Opencircuit This development board contains the STM32F103C8T6 (ARM 32 Cortex-M3 CPU) chip from the STM32 series, which is cheaper and more powerful than the well-known Arduino (ATmega328) chips. It is even possible to simply program these chips via the well-known Arduino IDE. This board works on 3.3V, has 64K fDelivered in 14 to 30 days€ 12,60 Incl. VAT
- Opencircuit Transparent acrylic base plate for Arduino Uno and breadboard Opencircuit Acrylic base plate for the Arduino Uno and a 400-point breadboard. This bottom plate protects the bottom of the Arduino Uno, eliminating a cause of short circuit. In addition, it is a very useful platform to set up a prototype because the Arduino ...Delivered in 14 to 30 days€ 1,80 Incl. VAT
- Opencircuit 3.5 "HDMI LCD shield for the Raspberry PI - Touchscreen Opencircuit This 3.5 inch TFT display can be used as an interface for the Raspberry PI, but also as a television, terminal, computer or another application where a 3.5 inch screen with a 1920 x 1080 resolution comes in handy.Delivered in 14 to 30 days€ 35,90 Incl. VAT
- Opencircuit WeMos D1 mini Lithium battery Shield Opencircuit This shield for the WeMos D1 mini contains the necessary electronics to connect a lithium battery to the WeMos D1 and also to charge the battery. With the USB port on this module, the battery can be charged with a charging current of 500mA or 1A (adjustable with the jumper on the bottom of this shieDelivered in 14 to 30 days€ 2,95 Incl. VAT
- Pololu A-Star 32U4 Mini LV Pololu #3103 The A-Star 32U4 Mini LV is a programmable module based on the ATmega32U4 from Atmel. Unlike competing products, it has an onboard switching step-up/step-down regulator that allows it to be powered efficiently from a 2.7 V to 11.8 V supply.Delivered in 5 to 14 days€ 25,80 Incl. VAT
- Pololu A-Star 32U4 Mini ULV Pololu #3102 The A-Star 32U4 Mini ULV is a programmable module based on the ATmega32U4 from Atmel. Unlike competing products, it has an onboard switching step-up/step-down regulator that allows it to be powered efficiently from a 0.5 V to 5.5 V supply.Delivered in 5 to 14 days€ 23,85 Incl. VAT
- Pololu A-Star 32U4 Robot Controller LV with Raspberry Pi Bridge (SMT Components Only) Pololu #3116 The A-Star 32U4 Robot Controller LV with Raspberry Pi Bridge is a programmable module well-suited for robotics applications, designed to work either as an auxiliary controller mounted to a Raspberry Pi or as a standalone control solution for a small robot.Delivered in 5 to 14 days€ 33,50 Incl. VAT
- Pololu A-Star 32U4 Robot Controller SV with Raspberry Pi Bridge (SMT Components Only) Pololu #3118 The A-Star 32U4 Robot Controller SV with Raspberry Pi Bridge is a programmable module well-suited for robotics applications, designed to work either as an auxiliary controller mounted to a Raspberry Pi or as a standalone control solution for a small robot.Delivered in 5 to 14 days€ 34,90 Incl. VAT
- Opencircuit GPIO Flat cable 40P rainbow Opencircuit This flat cable with 2x20 pins is used for the Raspberry PI A +, B + and PI 2, among other things.Delivered in 14 to 30 days€ 2,00 Incl. VAT
- Opencircuit NodeMcu ESP-32S Lua ESP-WROOM-32 WIFI Development Board Opencircuit The NodeMcu ESP-32S is an open-source board with built-in ESP-WROOM-32 WIFI module. This is not a weakness like the Arduino's, with 512kb of memory and a dual-core processor at 240Mhz, there is not a shortage of sources.Delivered in 14 to 30 days€ 11,45 Incl. VAT
- Adafruit LiIon/LiPoly Backpack Add-On for Pro Trinket/ItsyBitsy Adafruit #2124 Efficiently power your projects with the compact LiPoly backpack, designed to integrate seamlessly with ItsyBitsy or Pro Trinket. It features automated battery recharging, LED indicators, and adjustable charge current.Delivered in 10 to 30 days€ 5,75 Incl. VAT
- Adafruit Trinket - Mini Microcontroller - 3.3V Logic Adafruit #1500 The Trinket microcontroller board, built on the ATtiny85, offers great power in a small form for electronics projects. With 8K flash memory, USB bootloader, and options for 3V/5V operation, it's ideal for Arduino IDE and basic library use.Delivered in 10 to 30 days€ 8,25 Incl. VAT
- Adafruit Feather 32u4 Basic Proto Adafruit #2771 Feather 32u4 Basic Proto offers portability in microcontroller projects with ATmega32u4, USB-to-Serial functionality, and battery options. It supports 20 GPIO pins, 7 PWM, and 10 analog inputs, simplifying prototyping.Delivered in 10 to 30 days€ 23,25 Incl. VAT
Customer reviews about Platforms
