PikaBot - Maker UNO Smart Car Kit

PikaBot is a DIY mobile robot kit designed for educational purposes in electronics, microcontrollers, sensors, motors, and coding. The kit is based on the Maker UNO, an Arduino Uno compatible controller, and includes a Maker Drive dual-channel motor driver. It offers line following and obstacle avoidance functionalities through infrared sensors and an ultrasonic distance sensor.

Features:

• Easy Assembly for All Ages: The kit requires no soldering and is assembled using jumper wires. A detailed schematic diagram and mounting locations are printed inside the box for straightforward assembly.
• Programming Options: PikaBot can be programmed using the Arduino IDE or the mBlock block-based programming interface. Sample codes for line following and obstacle avoidance are available on GitHub.
• Comprehensive Guide Included: A step-by-step guide booklet is included, covering all the hands-on lessons needed to get started. Each step is clearly explained with images.

Kit Components

• Maker UNO Controller
• Maker Drive Dual-Channel Motor Driver
• Two "TT" Brush Motors with Pre-Soldered Wires
• 4 x AA Batteries and Battery Holder
• IR Line Tracking Modules
• Ultrasonic Distance Sensor
• All Necessary Accessories

Additional Resources

• Softcopy of PikaBot Booklet
• Arduino Sample Code
• mBlock Programming Tutorial

Packing List:

• 1 x Maker UNO (Simplifying Arduino for Education)
• 1 x Maker Drive: Dual H-Bridge Motor Driver for Beginner
• 2 x 3 - 6VDC Dual Axis TT Gear Motor (with pre-solder wires)
• 2 x Rubber Wheel for TT Gear Motor (63mm x 15mm)
• 2 x IR Line Tracking Module
• 1 x HC-SR04 Ultrasonic Ranging Module
• 1 x 4xAA Batteries
• 1 x 4xAA battery holder
• 1 x Breadboard Mini (35mmx42mm) - White
• 1 x 40 ways Male to Female Jumper Wire
• 1 x 40 ways Male to Male Jumper Wire
• 1 x USB Micro B cable
• 1 x mBot N20 Vacuum Steel Ball Castor
• 1 x Tiny Phillips Screwdriver - 85mm
• 4 x Bolt M3x25mm
• 4 x M3 Nut
• 1 x CH2 Quick Wiring Terminal Press Type
• 1 x Rocker Switch with wires
• 1 x Push Button with wires
• 14 x Plastic Rivet (M3)
• 2 x Plastic Rivet (M4)
• 1 x PikaBot Track
• 1 x Manual (Booklet)
• 1 x PikaBot Paper Box
• Box Dimensions: 127mm x 55mm x 19mm (not including motor shafts and wheels)