Material

Material to build projects such as enclosures, protoboards, breadboards, cables and wiring.

1820 results Sort by

Load previous

CR2032 ButtonCell - 3V - 230mAh - 5 pcs Varta #CR2032-5 The CR2032 battery is 2mm thick with a diameter of 32mm. The battery has a capacity of 230mAh with a voltage of 3V. The blister pack contains 5 CR2032 batteries.
In stock
€ 7,60 Incl. VAT
CR2025 Buttoncell - 3V - 170mAh - 5 pcs Camelion #CR2025C This CR2025 battery is 2.5mm thick with a diameter of 20mm. The battery has a capacity of 170mAh with a voltage of 3V. The blister pack contains 5 CR2025 batteries.
In stock
€ 2,95 Incl. VAT
Alkaline 9V batterij - 500mAh - 6 pcs Camelion #6LR61C/6 This alkaline 9V battery has a capacity of 500mAh and is suitable for powering the Arduino. The blister pack contains 6x 9V batteries.
In stock
€ 10,15 Incl. VAT
Alkaline AA batteries - 2800 mah - 24 pcs Camelion #LR6C/24B These AA batteries are useful in many wireless projects. The voltage starts just above 1.5V and drops as it drains below 1V. Since the alkaline batteries are single use, we send them per 24 pieces in a plastic box.Specifications Nom. voltage: 1.5 V Type.
In stock
€ 7,75 Incl. VAT
Multi-purpose battery tester with lcd display Velleman #BATTEST2 This battery tester is suitable for AAA (LR3), AA (LR6), C (LR14), D (LR20), E-block (9V), CR123A, CR2, CR-V3, 2CR5, CR-P2 batteries and button cells. The status of the battery is displayed on the LCD display.
In stock
€ 10,60 Incl. VAT
SN-28B Crimping Tool 20-28AWG - 0.25 / 0.5 / 1 mm 2 This crimping tool with 0.25 / 0.5 / 1 mm bits is suitable for mounting terminals and dupont connectors on a wire end of 20 to 28AWG.
In stock
€ 14,00 Incl. VAT
3 x AAA Battery Holder with On/Off Switch and 2-Pin JST Adafruit #727 This battery holder connects 3 AAA batteries together in series for powering all kinds of projects. We spec'd these out because the box is slim, and 3 AAA's add up to about 3.3-4.5V, a very similar range to Lithium Ion/polymer (Li-Ion) batteries and have an on-off switch.
In stock
€ 4,00 Incl. VAT
Experiment print 6.5 cm * 14.5 cm - lanes - 2 pieces This handy experiment print of 6.5 x 14.5 cm is etched on one side with print tracks that run completely from one side to the other.
In stock
€ 2,50 Incl. VAT
MicroUSB Plug to 5.5/2.1mm DC Barrel Jack Adapter Adafruit #2727 The premise of this MicroUSB Plug to 5.5/2.1mm Jack adapter is simple. There's a MicroUSB plug on one end and a 5.5mm/2.1mm DC barrel jack with center positive polarity on the other.
In stock
€ 2,50 Incl. VAT
GX12-2P Connector 2-Pin - male + female This plug is 12mm in circumference and has 2 channels through which signals can be sent. This plug comes in 2 parts, a male and a female connector to connect 2 circuits system. With the metal exterior with sealing ring, this connector is not easily damaged or 'accidentally' pulled out.
In stock
€ 2,10 Incl. VAT
GX12-3P Connector 3-Pin - male + female This plug is 12mm in circumference and has 3 channels through which signals can be sent. With the metal exterior with sealing ring, this connector is not easily damaged or 'accidentally' pulled out.
In stock
€ 1,50 Incl. VAT
GX12-4P Connector 4-Pin - male + female This plug is 12mm in circumference and has 4 channels through which signals can be sent. With the metal exterior with sealing ring, this connector is not easily damaged or 'accidentally' pulled out.
In stock
€ 1,50 Incl. VAT
GX12-5P Connector 5-Pin - male + female This plug is 12mm in circumference and has 5 channels through which signals can be sent. This plug comes in 2 parts, a male and a female connector to connect 2 circuits. With the metal exterior with sealing ring, this connector is not easily damaged or 'accidentally' pulled out.
In stock
€ 2,15 Incl. VAT
GX12-6P Connector 6-Pin - male + female This plug is 12mm in circumference and has 6 channels through which signals can be sent. With the metal exterior with sealing ring, this connector is not easily damaged or 'accidentally' pulled out.
In stock
€ 2,00 Incl. VAT
Instrument case - black - 200 x 160 x 65mm Velleman #WCAH2505 You can store a lot of electronics in this plastic case with gray color! It can easily fit a computer or another self-build system, such as an adjustable lab power supply.Specifications Dimensions: 200 x 160 x 65mm Colour: Black Material: Polystyrene
In stock
€ 19,00 Incl. VAT
Assorted jumper wire set (350 pcs) Velleman #WJW351 This breadboard jumper set (350 pieces) contains wire bridges to bring breadboarding to a higher level. The wire bridges do not loop above the breadboard, as with normal wire, but run neatly over the breadboard for a sleek finish.
In stock
€ 9,90 Incl. VAT
Bolt set 330 pcs (philips screws, nuts & washers) Velleman #K/SC1 This set with screws, nuts and washers (a total of 330) is very useful when making your own devices. The M2, M3 and M4 screws are suitable for small to medium-sized projects.
In stock
€ 4,65 Incl. VAT
Bolt set 180pcs (philips screws & nuts) Velleman #K/SC2 Get the Velleman K/SC2 Assortment Box for 180 pieces of high-quality screws and nuts. Simplify your DIY projects and repairs with this versatile kit.
In stock
€ 3,45 Incl. VAT
Plastic box - black 130 x 70 x 45mm Velleman #WCAH2853 This black project box of 130 x 70 x 45 mm is suitable for the installation of projects. With the vertical slots on the inside, several PCBs can be mounted in the box. With the screws on the top, the whole box can be closed securely.
In stock
€ 5,25 Incl. VAT
Solderless breadboard - 830 holes + jumper wires - 140 pcs Velleman #VTBB1N The Velleman VTBB1N is a comprehensive solderless breadboard kit with 830 holes and 140 jumper wires. Perfect for prototyping and testing electronic circuits. No soldering required!
In stock
€ 9,95 Incl. VAT
Fuse set 100 pcs, 5 x 20 mm slow Velleman #K/FU This set with 100 fuses contains 10 different values, with 10 pieces per value. This is a slow fuse, which means that this fuse is suitable for inductive charges, whichcould cause a short peak in the circuit.
In stock
€ 11,55 Incl. VAT
Pvc test lead set - cat iii 600 v - 12 a - 18 awg - length 70 cm Velleman #TLM73 Velleman test leads - replace your multimeter's standard test leads with these tested 2mm straight probes. Safe up to 1000V/12A with a protected right-angle banana plug for a secure connection. Set of 2 leads, both 70 cm long.
In stock
€ 6,80 Incl. VAT
Velleman Soldering tin - 0.8mm - rasin core - 500g - 1% flux Velleman #SOLD500GCL The SOLD500GCL roll offers 500 grams of high-quality soldering tin with an optimal diameter of 0.8 mm and a reliable 60/40 composition. Perfect for both fine and robust soldering projects, with a convenient resin core and an excellent melting point of 185°C.
In stock
€ 33,60 Incl. VAT
Universal soldering iron stand - STAND20 Velleman #STAND20 This soldering iron holder from Velleman is suitable for almost all soldering irons. In addition to holding the soldering iron, this standard has an additional function, namely cleaning the soldering tip.
In stock
€ 13,35 Incl. VAT
Velleman Lead-free Soldering tin - 0.6mm - rasin core - 100g Velleman #SOLD100G6LF Lead-free solder tin with a fine 0.6mm diameter on a 100-gram roll. Comprised of 99.3% tin and 0.7% copper and featuring a 230°C melting point. Perfect for detailed soldering tasks and compliant with current safety and health standards.
In stock
€ 12,00 Incl. VAT
Antistatic working mat with grounding cord - 30 x 55 cm Velleman #AS13 This antistatic soldering mat from Velleman is 30 x 55cm and is indispensable for tinkering with (sensitive) electronics. The mat is made of 2 types of (conductive and non-conductive) rubber to efficiently and safely absorb an antistatic discharge.
In stock
€ 13,95 Incl. VAT
Esd grounding cord - ø 1.8 mm Whadda #AS17 This grounding cord from Velleman is suitable as a spare cable for the anti-static mats from Velleman, but can also be used separately with the supplied plugs.Specifications Length: ± 1.8 m Diameter: ± 1.8 mm
In stock
€ 4,05 Incl. VAT
Grounding european plug for antistatic mat Velleman #AS18 This plug with European plug connects 3 banana plugs to the earth of a socket. This is very useful when multiple ESD devices need to be connected.
In stock
€ 19,50 Incl. VAT
Spare bit for vtss220 - point tip Velleman #BITC220/1 This soldering pin is suitable as a replacement for the soldering tip of the VTSS220 soldering stations from Velleman. The BITC220/1 has a pencil-shaped soldering tip with a 0.2 mm end.
In stock
€ 3,20 Incl. VAT
Spare bit for vtss220 - beveled tip Velleman #BITC220/3 This soldering pin is suitable as a replacement for the soldering tip of the VTSS220 soldering stations from Velleman. The BITC220/3 has a beveled soldering tip with a diameter of 3 mm.
In stock
€ 3,05 Incl. VAT
Spare tip chamfered 4mm for the VTSS220 Velleman #BITC220/4 This soldering tip is suitable as a replacement for the soldering tip of the VTSS220 soldering stations from Velleman. The BITC220 / 4 has a chamfered soldering tip with a diameter of 4mm.
In stock
€ 4,25 Incl. VAT
Spare tip chisel 5x1,5mm for the VTSS220 Velleman #BITC220/5 This soldering tip is suitable as a replacement for the soldering tip of the VTSS220 soldering stations from Velleman. The BITC220 / 5 has a chisel-shaped soldering tip with the dimensions 5mm x 1.5mm.
In stock
€ 4,25 Incl. VAT
Mean Well RS-15-24 Mean well #RS-15-24 This compact DC power supply from Mean Well has an output voltage of 24VDC with a maximum current of 0,7A.
In stock
€ 9,60 Incl. VAT
Mean Well RS-15-3.3 Mean well #RS-15-3.3 This compact DC power supply from Mean Well has an output voltage of 3,3VDC with a maximum current of 3A.
In stock
€ 9,65 Incl. VAT
SparkFun RJ45 Breakout Sparkfun #BOB-00716 Discover the versatile SparkFun RJ45 Breakout for Ethernet jacks and general-purpose connectors. Ideal for complex electronics projects, breadboarding, and creating your own RJ45 cable. Compact and flexible, it comes with comprehensive documentation. PCB only.
In stock
€ 1,70 Incl. VAT
RJ45 8-Pin Connector Sparkfun #PRT-00643 Boost your project's connectivity with the versatile Sparkfun RJ45 8-Pin Connector. Compatible with Cat5, Cat5e, and Cat6 Ethernet cables, it's perfect for large-scale module connections. Buy only what you need and expand possibilities with related breakout boards.
In stock
€ 1,65 Incl. VAT
Audio Jack 3.5mm Sparkfun #PRT-08032 Experience superior sound quality with the compact and easy-to-install Sparkfun Audio Jack 3.5mm. Ideal for versatile audio applications, DIY projects, and as a durable replacement for worn-out jacks.
In stock
€ 1,60 Incl. VAT
Battery Holder - 18650 (PTH) Sparkfun #PRT-13113 Secure your 18650 Lithium Ion Cell battery with the user-friendly Battery Holder - 18650 (PTH). Ideal for high-capacity applications, this affordable unit offers a simple power solution.
In stock
€ 1,35 Incl. VAT
Arduino Stackable Header Kit - R3 Sparkfun #PRT-11417 Boost your Arduino project with the Arduino Stackable Header Kit - R3. Ideal for Uno R3, Leonardo, and newer boards, it ensures seamless shield stacking. Kit includes 2x 8-pin, 1x 6-pin, and 1x 10-pin headers.
In stock
€ 2,50 Incl. VAT
Teensy Header Kit Sparkfun #PRT-13925 Enhance your Teensy development boards with the Sparkfun Teensy Header Kit. Compatible with Teensy 4.0, 3.2, LC, 3.0 and 3.1 versions, this kit allows for versatile configurations and breadboard compatibility. Ideal for tech enthusiasts.
In stock
€ 2,20 Incl. VAT
0.1" (2.54mm) Crimp Connector Housing: 2x8-Pin 5-Pack Pololu #1916 These 2×8-pin housings work with our wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 5.
In stock
€ 2,40 Incl. VAT
SMT Breakout PCB for SOIC-28 or TSSOP-28 - 3 Pack! Adafruit #1208 Beguiled by a fancy new chip that is only available in a SOIC or (T)SSOP pinout? This breakout PCB set will make your life much much easier and get you prototyping faster than ever. One side has a 28-TSSOP pin out with traces going to two rows of 0.1" spaced holes, the other has 28-SOIC.
In stock
€ 5,70 Incl. VAT
1000:1 Micro Metal Gearmotor HPCB 12V Pololu #3046 This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 986.41:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
In stock
€ 32,00 Incl. VAT
Stranded-Core orange wire - 26AWG - 2 meter This flexible 26AWG wire has silicone insulation with a orange color and is very strong and durable. The wire can is suitable for a voltage up to 600V and can be loaded with a maximum of ~ 3.5A,...
In stock
€ 1,95 Incl. VAT
Flexible red wire on spool - 22AWG - solid core - 7.5 meters This flexible 22AWG wire has plastic insulation with a red color and is very strong and durable. The wire has a fixed tinned core, making the wire suitable for, for example, connections on the breadboard or experiment pint.
In stock
€ 2,70 Incl. VAT
2xAAA Battery Cage with JST Connector Kitronik #2271 This 2xAAA Battery Cage with JST connector is compatible with the Igloo, PICAXE wearable module and the BBC micro:bit.
In stock
€ 1,50 Incl. VAT
380:1 Micro Metal Gearmotor HP 6V Pololu #4794 This gearmotor is a miniature high-power, 6 V brushed DC motor with a 379.17:1 metal gearbox. This version has stainless steel gearbox plates instead of the standard brass ones for increased durability and resistance to wear from radial loads.
In stock
€ 20,05 Incl. VAT
Deal
-10 %
SparkFun LiPo Charger Plus Sparkfun #PRT-15217 Charge your LiPo batteries safely with the SparkFun LiPo Charger Plus. With USB-C input, charge rate selection, thermal protection, and compatibility with 2-pin JST connector batteries, this charger ensures efficient and reliable charging. Features MCP73833 with a max charge rate of 1000mAh.
In stock
€ 9,40 € 8,50 Incl. VAT
Heat conducting plate 50 x 50mm - 0.5mm - 2.0W / MK - 8 pieces This set contains 8 heat conducting plates. The plates have a size of 50 x 50mm. The thickness is 0.5mm. They have 2.0W / MK heat dissipation
In stock
€ 4,65 Incl. VAT
Tactile buttons 12x12x7.3mm rainbow - 5 pieces A momentary switch with 4 pins (12x12mm) and a colored push button. These buttons are a bit more finished than the standard tactile buttons, giving your project a professional look. The set is supplied as 5 push buttons in different colors (red, green, yellow, blue, black).
In stock
€ 3,20 Incl. VAT

Viewed 50 of 1820 productsShow more

Customer reviews about Material



RademakerCopper Tape - 5mm (50ft) Great stuff
MarkCopper tape 5mm self-adhesive - 50 meters Works very well
Evelyn25X25mm 3M Double Sided Adhesive Thermal Tape - 10pcs Sticks well and seems to dissipate heat well, time will tell.
Margriet de GraafCopper Tape - 5mm (50ft) Quite narrow tape, but it works well for making a circuit (for making a Christmas card with LED light).