Arduino Uno WiFi Rev2

Add this board to a device and you'll be able to connect it to a WiFi network, using its secure ECC608 crypto chip accelerator. The Arduino Uno WiFi is functionally the same as the Arduino Uno Rev3, but with the addition of WiFi and some other enhancements. It incorporates a brand new 8-bit microprocessor from Microchip and has an onboard IMU (Inertial Measurement Unit).The Wi-Fi Module is a self-contained SoC with integrated TCP/IP protocol stack that can provide access to a Wi-Fi network, or act as an access point.The Arduino Uno WiFi has 14 digital input/output pins—5 can be used as PWM outputs with Pin 11 that is not PWM as on the UNO Rev3 —6 analog inputs, a USB connection, a power jack, an ICSP header, and a reset button. It contains everything needed to support the microcontroller. Simply connect it to a computer with a USB cable or power it with an AC adapter to get started.

Microcontroller	ATMEGA4809
Operating Voltage	5V
Input Voltage (recommended)	7 - 12V
Input Voltage (limit)	6 - 12V
Digital I/O Pins	14 — 5 Provide PWM Output
PWM Digital I/O Pins	5
Analog Input Pins	6
DC Current per I/O Pin	20 mA
DC Current for 3.3V Pin	50 mA
Flash Memory	48 KB (ATMEGA4809)
SRAM	6,144 B (ATMEGA4809)
EEPROM	256 Bytes (ATMEGA4809)
Clock Speed	16 MHz
LED_BUILTIN	25
Length	68.6 mm
Width	53.4 mm
Weight	25 g