Material

Material to build projects such as enclosures, protoboards, breadboards, cables and wiring.

1833 results Sort by

Load previous

Adafruit Pro Trinket LiIon/LiPoly Backpack Add-On Adafruit #2124 If you have a Pro Trinket you probably know it's the perfect little size for a portable project.
Delivered in 10 to 30 days
€ 5,70 Incl. VAT
Rechargable NiMH AAA Battery: 1.2 V, 900 mAh, 1 cell Pololu #1002 This is a generic rechargeable AAA NiMH battery with a capacity of 900 mAh. These batteries are well-suited for powering small- to medium-sized robots and can be used with any AAA battery holder. You will need to charge these batteries before you first use them.
Delivered in 5 to 14 days
€ 3,55 Incl. VAT
TO-220 Clip-On Heatsink Adafruit #977 Get the most out of your regulators, transistors and other TO-220 packaged chips by clipping on a heat-sink.
Delivered in 10 to 30 days
€ 1,10 Incl. VAT
IDC Breakout Helper - 2x3 (6 pin) Adafruit #2105 This little 2x3 (6 pin - 0.1 spaced) IDC Breadboard Helper is great in conjunction with our 6-pin IDC cable. It comes in two parts, a 'pin-through' socket and a male header. The socket straddles the center of a breadboard or Perma-Proto and then header plugs into the top of the socket.
Delivered in 10 to 30 days
€ 1,80 Incl. VAT
IDC Breakout Helper - 2x5 (10 pin) Adafruit #2102 This little 2x5 (10 pin - 0.1 spaced) IDC Breadboard Helper is great in conjunction with any of our 10-pin IDC cables. It comes in two parts, a 'pin-through' socket and a male header. The socket straddles the center of a breadboard or Perma-Proto and then header plugs into the top of the socket.
Delivered in 10 to 30 days
€ 2,00 Incl. VAT
UFL SMT Antenna Connector Adafruit #1661 uFL connectors are very small surface-mount parts used when an external RF antena is desired but a big bulky SMA connector takes up too much space. We use this part on our GPS and WiFi boards, they're great!
Delivered in 10 to 30 days
€ 0,90 Incl. VAT
PSP 2-Axis Analog Thumb Joystick Adafruit #444 Add a tiny joystick to your project with this PSP thumbstick. This is a replacement component for PSP1000's, but we think they'd make for a great little joystick/thumbstick add-on for a wearable, or...
Delivered in 10 to 30 days
€ 6,20 Incl. VAT
Adafruit Perma-Proto Quarter-sized Breadboard PCB - 3 pcs Adafruit #589 Adafruit Perma-Proto Quarter-sized Breadboard PCB - 3 pcs.Customers have asked us to carry basic perf-board, but we never liked the look of most basic perf: its always crummy quality, with pads that flake off and no labelling.
Delivered in 10 to 30 days
€ 10,55 Incl. VAT
M4 Hammer nuts - 2020 - 10 pcs Set of 10 M4 T-nuts, ideal for securely fastening components into aluminium frames like the 2020 profiles. Made from high-quality material for reliable and durable fastening.
Out of stock
€ 2,15 Incl. VAT
Metal Ball Tactile Button (6mm) - 10pcs Adafruit #3347 Add some steely elegance to your project with these Metal Ball Tactile Buttons. They've got a nice industrial shine to them along with a light blue underbelly. Not only do they look good, but they're also good if you have an actuator that will be pressing the button at an angle!
Delivered in 10 to 30 days
€ 8,45 Incl. VAT
USB Micro-B Breakout Board Adafruit #1833 Simple but effective - this breakout board has a USB Micro-B connector, with all 5 pins broken out. Great for pairing with a microcontroller with USB support, or adding USB 5V power to a project.
Delivered in 10 to 30 days
€ 2,20 Incl. VAT
Big MOSFET Slide Switch with Reverse Voltage Protection, HP Pololu #2815 This breadboard-compatible module is an alternative to bulky power switches. It uses a small integrated slide switch to control a high-side power MOSFET that can deliver continuous currents up to around 16 A at 4.5 V to 40 V.
Delivered in 5 to 14 days
€ 14,00 Incl. VAT
Button with led - Blue - momentary - metal 16mm Metal button with a mounting diameter of 16mm. This button has a blue LED illuminated ring, which works on 12V via a separate circuit.
Out of stock
€ 5,00 Incl. VAT
5:1 Micro Metal Gearmotor HPCB 12V Pololu #3036 This gearmotor is a miniature high-power, 12 V brushed DC motor with long-life carbon brushes and a 4.995:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
Delivered in 5 to 14 days
€ 22,50 Incl. VAT
Adafruit TPL5111 Low Power Timer Breakout Adafruit #3573 With some development boards, low power usage is an afterthought. Especially when price and usability are the main selling points.
Delivered in 10 to 30 days
€ 6,90 Incl. VAT
Mini spirit levels 10x6mm - 5 pieces A set of 5 mini spirit levels. These very small spirit levels with a diameter of just 1 centimeter can be placed on a project to make sure it is level.
Out of stock
€ 3,05 Incl. VAT
Big MOSFET Slide Switch with Reverse Voltage Protection, MP Pololu #2814 This breadboard-compatible module is an alternative to bulky power switches. It uses a small integrated slide switch to control a high-side power MOSFET that can deliver continuous currents up to around 8 A at 4.5 V to 40 V.
Delivered in 5 to 14 days
€ 8,00 Incl. VAT
12mm Coin Cell Breakout w/ On-Off Switch Adafruit #1867 Simple but effective - this breakout board has a CR1220 coin cell battery holder soldered on, an on/off switch and 0.1" pitch breakout pins for easy connecting.
Delivered in 10 to 30 days
€ 5,00 Incl. VAT
JST XH 2,3,4 Pin connector Kit - 2.54mm - 100 pieces The JST XH 2,3,4 Pin Connector Kit - 2.54mm - 100 pieces offers a versatile range of connectors for various applications like power supplies, battery connections, and signal transmission. Known for their durability, secure locking mechanism, and heat resistance.
Out of stock
€ 6,30 Incl. VAT
0.1" (2.54mm) Crimp Connector Housing: 1x1-Pin 25-Pack Pololu #1900 These single-pin housings work with our wires with pre-crimped terminals and our crimp pins to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or
Delivered in 5 to 14 days
€ 1,90 Incl. VAT
0.1" (2.54mm) Crimp Connector Housing: 1x6-Pin 10-Pack Pololu #1905 These six-pin housings work with our wires with pre-crimped terminals to let you quickly make custom cables that mate with various 0.1"-spaced connectors, including male or female headers and solderless breadboards. They are sold in packs of 10.
Delivered in 5 to 14 days
€ 1,90 Incl. VAT
Wires with Pre-Crimped Terminals 60-Piece 6-Color Assortment M-M 2" Pololu #3965 These premium wires are stranded 26 AWG wires with male terminals on both ends. Together with our 0.1″ crimp connector housings, these wires can be used to make custom cables with 0.1″ (2.54 mm) c
Delivered in 5 to 14 days
€ 15,30 Incl. VAT
Wires with Pre-Crimped Terminals 60-Piece 6-Color Assortment M-F 2" Pololu #3964 Wires with Pre-Crimped Terminals 60-Piece 6-Color Assortment M-F 2".These premium wires are stranded 26 AWG wires with female terminals on one end and male terminals on the other end.
Delivered in 5 to 14 days
€ 15,30 Incl. VAT
Wires with Pre-Crimped Terminals 60-Piece 6-Color Assortment F-F 2" Pololu #3963 These premium wires are stranded 26 AWG wires with female terminals on both ends. Together with our 0.1″ crimp connector housings, these wires can be used to make custom cables with 0.1″ (2.54 mm) connectors.
Delivered in 5 to 14 days
€ 17,00 Incl. VAT
Stranded Wire: Green, 20 AWG, 40 Feet Pololu #2655 High-quality 20 AWG flexible copper wire in green, suitable for various electronic applications. Comes on a 40-foot spool and offers better flexibility than solid wire. Spool designed with a side tab for easy storage. UL 1007 compliant.
Delivered in 5 to 14 days
€ 11,15 Incl. VAT
Stranded Wire: Blue, 20 AWG, 40 Feet Pololu #2656 High-quality 20 AWG flexible copper wire in blue, suitable for various electronic applications. Comes on a 40-foot spool and offers better flexibility than solid wire. Spool designed with a side tab for easy storage. UL 1007 compliant.
Delivered in 5 to 14 days
€ 11,15 Incl. VAT
Stranded Wire: Blue, 30 AWG, 100 Feet Pololu #2606 This is a spool with 100 feet of blue 30 AWG stranded copper hook-up wire. It conforms to the UL1007 specification and is rated for up to 80°C and 300 VAC.
Delivered in 5 to 14 days
€ 9,35 Incl. VAT
156:1 Metal Gearmotor 20Dx44L mm 6V with Extended Motor Shaft Pololu #3468 156:1 Metal Gearmotor 20Dx44L mm 6V with Extended Motor Shaft.These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 6V brushed DC motor combined with a 156.3:1 metal spur gearbox.
Delivered in 5 to 14 days
€ 30,00 Incl. VAT
75:1 Micro Metal Gearmotor HP 6V Pololu #2361 This gearmotor is a miniature high-power, 6 V brushed DC motor with a 75.81:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
Delivered in 5 to 14 days
€ 20,05 Incl. VAT
100:1 Micro Metal Gearmotor HP 6V Pololu #1101 This gearmotor is a miniature high-power, 6 V brushed DC motor with a 100.37:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
Delivered in 5 to 14 days
€ 21,20 Incl. VAT
2-C Battery Holder Pololu #1157 This battery holder for two C cells features two 6″, 24-gauge leads that have approximately 5 mm of insulation stripped off of the ends.
Delivered in 5 to 14 days
€ 3,50 Incl. VAT
Snap-Action Switch with 50mm Lever: 3-Pin, SPDT, 5A Pololu #1403 This single-pole, double-throw (SPDT) momentary switch can be used as a general-purpose micro switch, but the long lever arm makes it especially useful as a tactile bump sensor for your robot (e.g whiskers or antennae).
Delivered in 5 to 14 days
€ 2,75 Incl. VAT
50:1 Micro Metal Gearmotor HPCB 6V with Extended Motor Shaft Pololu #3073 50:1 Micro Metal Gearmotor HPCB 6V with Extended Motor Shaft.This gearmotor is a miniature high-power, 6 V brushed DC motor with long-life carbon brushes and a 51.45:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
Delivered in 5 to 14 days
€ 26,00 Incl. VAT
75:1 Micro Metal Gearmotor LP 6V Pololu #2360 This gearmotor is a miniature low-power, 6 V brushed DC motor with a 75.81:1 metal gearbox. It has a cross section of 10 × 12 mm, and the D-shaped gearbox output shaft is 9 mm long and 3 mm in diameter.
Delivered in 5 to 14 days
€ 20,05 Incl. VAT
Rechargeable NiMH Battery Pack: 8.4 V, 2200 mAh, 4+3 AA Cells, JR Connector Pololu #2226 This is a rechargeable 8.4 V NiMH battery pack with a capacity of 2200 mAh. The pack consists of seven AA cells in two rows and a 4" lead terminated by a “JR”-style connector.
Delivered in 5 to 14 days
€ 23,10 Incl. VAT
313:1 Metal Gearmotor 20Dx46L mm 6V with Extended Motor Shaft Pololu #3471 313:1 Metal Gearmotor 20Dx46L mm 6V with Extended Motor Shaft.These small brushed DC gearmotors can deliver a lot of power for their size. This version has a 6V brushed DC motor combined with a 312.5:1 metal spur gearbox.
Delivered in 5 to 14 days
€ 30,00 Incl. VAT
Bracket Pair for Sharp GP2Y0A02, GP2Y0A21, and GP2Y0A41 Distance Sensors - Parallel Pololu #2678 These lightweight aluminum brackets make it easy to mount and integrate the Sharp GP2Y0A02, GP2Y0A21, and GP2Y0A41 Distance Sensors into your project. The brackets are strong enough to hold their position, but they can also be bent by hand to different angles if the application calls for it.
Delivered in 5 to 14 days
€ 6,00 Incl. VAT
Magnetic Encoder Pair Kit for Micro Metal Gearmotors, 12 CPR, 2.7-18V (HPCB compatible) Pololu #3081 Magnetic Encoder Pair Kit for Micro Metal Gearmotors, 12 CPR, 2.7-18V (HPCB compatible). Add quadrature encoders to your micro metal gearmotors (extended back shaft version required) with this kit that uses a magnetic disc and hall effect sensors to provide 12 counts per revolution of the motor...
Delivered in 5 to 14 days
€ 9,50 Incl. VAT
Tumbler switch - on / off / on auto-return - 2 pieces Set of 2 switches with 3 positions that automatically spring back to the 'off' position. Ideal for motor control and other applications requiring momentary action.
Out of stock
€ 2,65 Incl. VAT
IDC Breakout Helper - 2x20 (40 pin) Adafruit #2270 This combo of 2x20 pin (0.1 spaced) header and socket is for the popular Raspberry GPIO cable. It comes in two parts, a 'pin-through' socket and a male header. The socket straddles the center of a breadboard or perma-proto and then header plugs into the top of the socket.
Delivered in 10 to 30 days
€ 2,60 Incl. VAT
USB / DC / Solar Lithium Ion/Polymer charger Adafruit #390 A 2.1mm adapter cable is also required to adapt a solar panel to the DC power jack.Make your projects to go green this summer with our specialized USB/Solar Lithium Ion Polymer Battery charger! This charger is a very unique design, perfect for outdoor projects, or DIY iPod chargers.
Delivered in 10 to 30 days
€ 20,00 Incl. VAT
Hook-up Wire Spool Set - 22AWG Solid Core - 10 x 25ft Adafruit #3174 This is a box of ten 25ft (7,62 meter) spools of solid-core wire. The wire is easy to solder to, and when bent it keeps its shape pretty well.
Delivered in 10 to 30 days
€ 34,90 Incl. VAT
Snap-Action Switch with 16.7mm Lever: 3-Pin, SPDT, 5A Pololu #1402 This single-pole, double-throw (SPDT) momentary switch can be used as a general-purpose micro switch or tactile bump sensor for your robot.
Delivered in 5 to 14 days
€ 2,45 Incl. VAT
Rechargeable NiMH Battery Pack: 6.0 V, 2200 mAh, 3+2 AA Cells, JR Connector Pololu #2224 This is a rechargeable 6.0 V NiMH battery pack with a capacity of 2200 mAh. The pack consists of five AA cells in two rows and a 4" lead terminated by a “JR”-style connector.
Delivered in 5 to 14 days
€ 18,15 Incl. VAT
Rechargeable NiMH Battery Pack: 7.2 V, 2200 mAh, 3x2 AA Cells, JR Connector Pololu #2225 This is a rechargeable 7.2 V NiMH battery pack with a capacity of 2200 mAh. The pack consists of six AA cells in two rows and a 4" lead terminated by a “JR”-style connector.
Delivered in 5 to 14 days
€ 20,60 Incl. VAT
Audio Kabel 60cm - 3.5mm - 3.5mm This 60cm audio cable has a male stereo plug on both sides.Dimensions: Audio Cable 60cm - 3.5mm - 3.5mm
Out of stock
€ 1,70 Incl. VAT
DIP switches 6 positions red - 5 pcs A set of 5 DIP switches. They are 6 sliders wide with a pitch of 2.54mm. Handy to give some settings mechanically to an ic or to switch different channels on / off for example.
Out of stock
€ 2,50 Incl. VAT
USB Logic Analyzer - 8 channels This compact logic analyzer can record 8 channels up to 24 MHz for analysis. The analyzer is suitable for recording I2C, SPI or UART communication at a maximum of 5.25V (everything from 2V is a...
Out of stock
€ 10,00 Incl. VAT
Test cable for Logic Analyzer This test cable with red probes is suitable for the Logic Analyzer, but can of course be used for many other applications.
Out of stock
€ 4,30 Incl. VAT
60kg Door magnet - 12V This electronic door magnet can be used to keep a door or flap open or closed. When power is put on the lock, it will pull the metal plate supplied with a force of approximately 60 kg. The corresponding hardware is included.
Out of stock
€ 15,00 Incl. VAT

Viewed 50 of 1833 productsShow more

Customer reviews about Material



Margriet de GraafCopper Tape - 5mm (50ft) Quite narrow tape, but it works well for making a circuit (for making a Christmas card with LED light).
Evelyn25X25mm 3M Double Sided Adhesive Thermal Tape - 10pcs Sticks well and seems to dissipate heat well, time will tell.
RademakerCopper Tape - 5mm (50ft) Great stuff
MarkCopper tape 5mm self-adhesive - 50 meters Works very well

Material

Customer reviews about Material

Recently viewed items