Programmer for the 1of!-ESP12 and the DSMR logger V4

Placed on 2019-04-18

Introduction

In a previous article I described how this ESP-01 USB Adapter suitable to serve as a programmer for the ESP-01.

In this article I show that you can make an adapter cable to use the same adapter, modified or not, to 1or!-ESP12 prototype board to program. Because Version 4 of the DSMR logger is prototyped with such a 1or!-ESP12 you can also use this adapter cable for programming the DSMR logger.

What do you need

ESP-01 USB Adapter In stock Possibly modified with a small switch € 2,50 Double Sided Prototyping PCB 2x8cm - 5 pieces In stock € 2,65 IC Male header 40 pin 2,54mm - 5 stuks In stock € 4,20 Female-Female 20 cm band cable 40 pieces In stock Dupont 5 pin plug (female) € 2,45 Stranded-Core black wire - 26AWG - 2 meter Out of stock Piece of flexible wire, 4 cores € 1,35 Total € 13,15

Current Page 1. Introduction Next page 2. Make a transition cable 1. Introduction 2. Make a transition cable Posted by Willem Aandewiel Website Willem Aandewiel (1955) has a background in electronics and digital techniques. However, most of his working life he has worked in automation where he has worked in just about all disciplines from programmer to project leader and project manager. Willem was one of the first Dutchmen with a micro-computer (KIM-1, 1976) at a time when the PC had yet to be invented. Nowadays he is mainly concerned with the design and production of small electronic circuits with microprocessors. His 'mission in life' is to make people enthusiastic about making their own electronic circuits, microcomputers and programming.

Programmer for the 1of!-ESP12 and the DSMR logger V4

Introduction

What do you need

Comments