PLA Filament Copper - 1.75 - 1kg - Devil Design

Item number 55950 Brand Devil Design Model DDPLA1.75_COPPER_1KG Share
PLA Filament Copper - 1.75 - 1kg - Devil Design



Description Attachments

This PLA Filament in copper has a diameter of 1.75mm, with a tolerance of ± 0.05mm, and is supplied on a 1kg spool. The recommended temperature for the hotend is between 200 and 235 °C, and for the heatbed between 50 and 60 °C. The filament comes in a sealed package with a moisture absorbent.

PLA is a biodegradable material that is easy to print. It is ideal for prototyping and decorative objects. However, PLA is less suitable for mechanically stressed parts.

NB: When the sealed packaging is opened, the filament can no longer be returned.

Properties

Brand information
Brand Devil Design
ModelDDPLA1.75_COPPER_1KG
Datasheet
Diameter 1,75 mm
Color Buyer
Material PLA
Hotend temperature 200 °C - 235 °C
Heatbed temperature 50 °C - 60 °C
weight 1Kg
Coil diameter 200mm
Mounting hole diameter 55mm
Size info
Length205 mm
Width205 mm
Height80 mm
Weight1.360 g

Alternative products

Customer questions

Customer Reviews

The Netherlands
Snel in huis Nice color No negatives
Just good.
Placed on 
The Netherlands
Snel in huis Top kwaliteit Nice color No negatives
Received quickly and immediately tested. Print neatly and nice color.
Placed on 
The Netherlands
Geen Warpt als een gek, erger dan ABS. Zelfs met een buildplate temperatuur van 100 C. Very high printing temperatures for PLA.
Haven't been able to make a single good print with this PLA filament, still have a quarter roll that can go in the trash. When purchasing I already suspected the high temperatures, 80 to 90 degrees for the buildplate and 235 to 250 degrees for the hotend, those are extreme temperatures for PLA, normally no high temperatures are needed. Anyway, naive as I was bought anyway. In the photo you can see a print I made with this PLA, very quickly the stuff jams, midprint I switched to PET-G of the same brand and all problems solved. So this really depends on the PLA. Maybe the added dyes. Anyway, I will not buy this color again. If you buy PLA, make sure that you can print at a low temperature.
Placed on 
2
PLA Filament Copper - 1.75 - 1kg - Devil Design Click a star to leave your review

Suggested products

Recently viewed items

Webwinkelkeur Kiyoh Trustpilot Opencircuit