Devil Design
The company Devil Design was founded in 2012. Originally operated as a 3D printer parts, accessories and filament reseller, however in 2014 they started production of their own filament used in 3D printers. The production of filament uses 100% original top brand row material. Thanks to the advanced technological process, the filaments are the best quality and bubble free, therefore any impurities causing troubles in printing are eliminated.88 resultsSort by
- PETG Filament 1.75mm - 1kg - Transparent bright yellow Devil Design This PETG Filament with a diameter of 1.75 mm (± 0.05 mm tolerance) and a transparent bright yellow color is supplied on a 1 kg spool. The recommended temperature for the hot end is 220-250 ° C and 70-80 ° C for the heat bed. 10 for € 13,91 ea. 25 for € 13,62 ea. 50 for € 13,33 ea. 100 for € 13,04 ea. 500 for € 12,75 ea. More information Delivered in 7 to 35 days Sold per piece€ 14,20 Incl. VATAdd to cart
- PLA Filament 1.75mm - 1kg - Beige Devil Design This PLA Filament with a diameter of 1.75mm (± 0.05 mm tolerance) and a beige color is delivered on a spool of 1kg. The recommended temperature for the hotend is 200-235 °C and 50-60 °C for the heatbed. 10 for € 13,90 ea. 25 for € 13,59 ea. 50 for € 13,29 ea. 100 for € 12,98 ea. 500 for € 12,67 ea. More information Delivered in 7 to 35 days Sold per piece€ 14,20 Incl. VATAdd to cart
- ASA Filament 1.75mm - 1kg - Black Devil Design This black ASA Filament with a diameter of 1.75mm (± 0.05mm tolerance) is supplied on a 1kg spool. ASA is a very strong and UV resistant material, make sure that there is good ventilation during printing, the gases produced are bad for health. 10 for € 17,08 ea. 25 for € 16,72 ea. 50 for € 16,36 ea. 100 for € 16,- ea. 500 for € 15,64 ea. More information Delivered in 7 to 35 days Sold per piece€ 17,45 Incl. VATAdd to cart
- PLA Filament 1.75mm - 1kg - White Devil Design This PLA Filament with a diameter of 1.75mm (± 0.05 mm tolerance) and a white color is delivered on a spool of 1kg. The recommended temperature for the hotend is 200-235 °C and 50-60 °C for the heatbed. 10 for € 13,94 ea. 25 for € 13,68 ea. 50 for € 13,41 ea. 100 for € 13,15 ea. 500 for € 12,89 ea. More information Delivered in 7 to 35 days Sold per piece€ 14,20 Incl. VATAdd to cart
- PLA Filament 1.75mm - 6 rolls of 0.33kg - Starterkit Devil Design PLA Filament 1.75mm - 6 rolls of 0.33kg - Starterkit. This PLA Filament starter pack contains 1.75mm (± 0.05mm tolerance) filament with the colors White, Light Yellow, Red, Light Green, Super Blue and Black on loose rolls of 0.33kg. 10 for € 27,92 ea. 25 for € 27,36 ea. 50 for € 26,79 ea. 100 for € 26,24 ea. 500 for € 25,67 ea. More information Delivered in 7 to 35 days Sold per piece€ 28,50 Incl. VATAdd to cart
- PMMA Filament 1.75mm - 1kg - Transparent Devil Design This PMMA Filament with a diameter of 1.75mm (± 0.05mm tolerance) is supplied on a 1kg spool. The recommended temperature for the hotend is 225-245 ° C and 80-90 ° C for the heatbed. 10 for € 15,12 ea. 25 for € 14,85 ea. 50 for € 14,57 ea. 100 for € 14,30 ea. 500 for € 14,04 ea. More information Delivered in 7 to 35 days Sold per piece€ 15,40 Incl. VATAdd to cart
- PLA Filament 1.75mm - 1kg - Yellow Devil Design This PLA Filament with a diameter of 1.75mm (± 0.05 mm tolerance) and a yellow color is delivered on a spool of 1kg. The recommended temperature for the hotend is 200-235 °C and 50-60 °C for the heatbed. 10 for € 13,92 ea. 25 for € 13,64 ea. 50 for € 13,36 ea. 100 for € 13,08 ea. 500 for € 12,81 ea. More information Delivered in 7 to 35 days Sold per piece€ 14,20 Incl. VATAdd to cart
- PLA Filament 1.75mm - 1kg - Gold Devil Design This PLA Filament with a diameter of 1.75mm (± 0.05 mm tolerance) and a golden color is delivered on a spool of 1kg. The recommended temperature for the hotend is 200-235 °C and 50-60 °C for the heatbed. 10 for € 13,86 ea. 25 for € 13,53 ea. 50 for € 13,19 ea. 100 for € 12,85 ea. 500 for € 12,53 ea. More information Delivered in 7 to 35 days Sold per piece€ 14,20 Incl. VATAdd to cart
- PLA Filament 1.75mm - 1kg - Brown Devil Design This PLA Filament with a diameter of 1.75mm (± 0.05 mm tolerance) and a brown color is delivered on a spool of 1kg. The recommended temperature for the hotend is 200-235 °C and 50-60 °C for the heatbed. 10 for € 13,88 ea. 25 for € 13,56 ea. 50 for € 13,23 ea. 100 for € 12,91 ea. 500 for € 12,59 ea. More information Delivered in 7 to 35 days Sold per piece€ 14,20 Incl. VATAdd to cart
- ABS+ Filament 1.75mm - 2kg - Wit Devil Design This white ABS + Filament with a diameter of 1.75mm (± 0.05mm tolerance) is supplied on a 2kg spool. The recommended temperature for the hotend is 230-240 ° C and 90-100 ° C for the heatbed. 10 for € 27,86 ea. 25 for € 27,25 ea. 50 for € 26,63 ea. 100 for € 26,02 ea. 500 for € 25,40 ea. More information Delivered in 7 to 35 days Sold per piece€ 28,50 Incl. VATAdd to cart
- ABS+ Filament 1.75mm - 1kg - White Devil Design This white ABS+ Filament with a diameter of 1.75mm (± 0.05 mm tolerance) is delivered on a spool of 1kg. The recommended temperature for the hotend is 230-240 °C and 60-100 °C for the heatbed. The size of the spool is 200mm x 70mm and comes in a sealed package with moisture absorbing agent. 10 for € 13,86 ea. 25 for € 13,53 ea. 50 for € 13,20 ea. 100 for € 12,86 ea. 500 for € 12,53 ea. More information Delivered in 7 to 35 days Sold per piece€ 14,20 Incl. VATAdd to cart
- ABS+ Filament 1.75mm - 1kg - Black Devil Design This black ABS+ Filament with a diameter of 1.75mm (± 0.05 mm tolerance) is delivered on a spool of 1kg. The recommended temperature for the hotend is 230-240 °C and 60-100 °C for the heatbed. The size of the spool is 200mm x 70mm and comes in a sealed package with moisture absorbing agent. 10 for € 13,90 ea. 25 for € 13,59 ea. 50 for € 13,29 ea. 100 for € 12,99 ea. 500 for € 12,68 ea. More information Delivered in 7 to 35 days Sold per piece€ 14,20 Incl. VATAdd to cart
- PLA Filament 1.75mm - 1kg - Super blue Devil Design This PLA Filament with a diameter of 1.75mm (± 0.05 mm tolerance) and a blue color is delivered on a spool of 1kg. The recommended temperature for the hotend is 200-235 °C and 50-60 °C for the heatbed. 10 for € 13,92 ea. 25 for € 13,65 ea. 50 for € 13,37 ea. 100 for € 13,09 ea. 500 for € 12,82 ea. More information Delivered in 7 to 35 days Sold per piece€ 14,20 Incl. VATAdd to cart
- PETG Filament 1.75mm - 0,33kg - Kastanje bruin Devil Design Dit PETG Filament met een diameter van 1.75mm ( ± 0.05 mm tolerantie) en een kastanje bruine kleur wordt geleverd op een spoel van 0,33kg. De aanbevolen temperatuur voor de hotend is 220-250 °C en 70-80 °C voor het heatbed. More information Delivered in 7 to 35 days Sold per piece€ 9,80 Incl. VATAdd to cart
- PETG Filament 1.75mm - 0,33kg - Race groen Devil Design Dit PETG Filament met een diameter van 1.75mm ( ± 0.05 mm tolerantie) en een race groene kleur wordt geleverd op een spoel van 0,33kg. De aanbevolen temperatuur voor de hotend is 220-250 °C en 70-80 °C voor het heatbed. More information Delivered in 7 to 35 days Sold per piece€ 9,80 Incl. VATAdd to cart
- PLA Filament 1.75mm - 1kg - Galaxy Super Blauw Devil Design Dit PLA Filament met een diameter van 1.75mm ( ± 0.05 mm tolerantie) en een super blauwe kleur met kleine 'glitters' verwerkt in het filament wordt geleverd op een spoel van 1kg. De aanbevolen temperatuur voor de hotend is 220-250 °C en 70-80 °C voor het heatbed. More information Delivered in 7 to 35 days Sold per piece€ 14,50 Incl. VATAdd to cart
- PLA Filament 1.75mm - 1kg - Galaxy Groen Devil Design Dit PLA Filament met een diameter van 1.75mm ( ± 0.05 mm tolerantie) en een groene kleur met kleine 'glitters' verwerkt in het filament wordt geleverd op een spoel van 1kg. De aanbevolen temperatuur voor de hotend is 220-250 °C en 70-80 °C voor het heatbed. More information Delivered in 7 to 35 days Sold per piece€ 14,70 Incl. VATAdd to cart
- PLA Filament 1.75mm - 1kg - Licht Marmer Devil Design Dit PLA Filament met een diameter van 1.75mm ( ± 0.05 mm tolerantie) en een licht marmere kleur wordt geleverd op een spoel van 1kg. De aanbevolen temperatuur voor de hotend is 220-250 °C en 70-80 °C voor het heatbed. More information Delivered in 7 to 35 days Sold per piece€ 17,65 Incl. VATAdd to cart
- PLA Filament 1.75mm - 1kg - Donker Marmer Devil Design Dit PLA Filament met een diameter van 1.75mm ( ± 0.05 mm tolerantie) en een donkere marmere kleur wordt geleverd op een spoel van 1kg. De aanbevolen temperatuur voor de hotend is 220-250 °C en 70-80 °C voor het heatbed. More information Delivered in 7 to 35 days Sold per piece€ 17,65 Incl. VATAdd to cart
- PETG Filament 1.75mm - 1kg - Galaxy Super Blauw Devil Design Dit PETG Filament met een diameter van 1.75mm ( ± 0.05 mm tolerantie) en een super blauwe galaxy kleur met kleine 'glitters' verwerkt in het filament wordt geleverd op een spoel van 1kg. De aanbevolen temperatuur voor de hotend is 220-250 °C en 70-80 °C voor het heatbed. More information Delivered in 7 to 35 days Sold per piece€ 14,70 Incl. VATAdd to cart
- PETG Filament 1.75mm - 1kg - Galaxy Groen Devil Design Dit PETG Filament met een diameter van 1.75mm ( ± 0.05 mm tolerantie) en een groene galaxy kleur met kleine 'glitters' verwerkt in het filament wordt geleverd op een spoel van 1kg. De aanbevolen temperatuur voor de hotend is 220-250 °C en 70-80 °C voor het heatbed. More information Delivered in 7 to 35 days Sold per piece€ 14,70 Incl. VATAdd to cart
- PLA Filament 1.75mm - 1kg - Galaxy Rood Devil Design Dit PLA Filament met een diameter van 1.75mm ( ± 0.05 mm tolerantie) en een rode kleur met kleine 'glitters' verwerkt in het filament wordt geleverd op een spoel van 1kg. De aanbevolen temperatuur voor de hotend is 220-250 °C en 70-80 °C voor het heatbed. More information Delivered in 7 to 35 days Sold per piece€ 14,40 Incl. VATAdd to cart
- ASA Filament 1.75mm - 1kg - Navy Blue Devil Design This dark blue (navy) ASA Filament with a diameter of 1.75 mm (± 0.05 mm tolerance) is supplied on a 1 kg spool. ASA is a very strong and UV-resistant material, make sure that there is good ventilation during printing, the gases produced are bad for your health. 10 for € 15,42 ea. 25 for € 15,04 ea. 50 for € 14,67 ea. 100 for € 14,29 ea. 500 for € 13,93 ea. More information Delivered in 7 to 35 days Sold per piece€ 15,80 Incl. VATAdd to cart
- ASA Filament 1.75mm - 1kg - green Devil Design This green ASA Filament with a diameter of 1.75 mm (± 0.05 mm tolerance) is supplied on a 1 kg spool. ASA is a very strong and UV-resistant material, make sure that there is good ventilation during printing, the gases produced are bad for your health. 10 for € 15,44 ea. 25 for € 15,08 ea. 50 for € 14,74 ea. 100 for € 14,38 ea. 500 for € 14,04 ea. More information Delivered in 7 to 35 days Sold per piece€ 15,80 Incl. VATAdd to cart
- ASA Filament 1.75mm - 1kg - Brown Devil Design This brown ASA Filament with a diameter of 1.75 mm (± 0.05 mm tolerance) is supplied on a 1 kg spool. ASA is a very strong and UV-resistant material, make sure that there is good ventilation during printing, the gases produced are bad for your health. More information Delivered in 7 to 35 days Sold per piece€ 15,80 Incl. VATAdd to cart
- PETG Filament 1.75mm - 1kg - Dark gray Devil Design This PETG Filament with a diameter of 1.75 mm (± 0.05 mm tolerance) and a dark gray color is supplied on a 1 kg spool. The recommended temperature for the hot end is 220-250 ° C and 70-80 ° C for the heat bed. 10 for € 13,92 ea. 25 for € 13,63 ea. 50 for € 13,34 ea. 100 for € 13,07 ea. 500 for € 12,78 ea. More information Delivered in 7 to 35 days Sold per piece€ 14,20 Incl. VATAdd to cart
- PETG Filament 1.75mm - 1kg - Dark orange Devil Design This PETG Filament with a diameter of 1.75 mm (± 0.05 mm tolerance) and a dark orange color is supplied on a 1 kg spool. The recommended temperature for the hot end is 220-250 ° C and 70-80 ° C for the heat bed. 10 for € 13,92 ea. 25 for € 13,63 ea. 50 for € 13,34 ea. 100 for € 13,06 ea. 500 for € 12,77 ea. More information Delivered in 7 to 35 days Sold per piece€ 14,20 Incl. VATAdd to cart
- PETG Filament 1.75mm - 1kg - Ocean blue Devil Design This PETG Filament with a diameter of 1.75 mm (± 0.05 mm tolerance) and an ocean blue color is supplied on a 1 kg spool. The recommended temperature for the hot end is 220-250 ° C and 70-80 ° C for the heat bed. 10 for € 13,88 ea. 25 for € 13,56 ea. 50 for € 13,24 ea. 100 for € 12,92 ea. 500 for € 12,60 ea. More information Delivered in 7 to 35 days Sold per piece€ 14,20 Incl. VATAdd to cart
- -26 % PETG Filament 1.75mm - 1kg - Transparent ruby red Devil Design This PETG Filament with a diameter of 1.75 mm (± 0.05 mm tolerance) and a transparent ruby red color is supplied on a 1 kg spool. The recommended temperature for the hot end is 220-250 ° C and 70-80 ° C for the heat bed. 10 for € 13,91 ea. 25 for € 13,61 ea. 50 for € 13,32 ea. 100 for € 13,02 ea. 500 for € 12,73 ea. More information Delivered in 7 to 35 days Sold per piece€ 19,20 € 14,20 Incl. VATAdd to cart
- PETG Filament 1.75mm - 5kg - Black Devil Design This PETG Filament with a diameter of 1.75 mm (± 0.05 mm tolerance) and a black color is supplied on a 5 kg spool. The recommended temperature for the hot end is 220-250 ° C and 70-80 ° C for the heat bed. 10 for € 66,81 ea. 25 for € 63,63 ea. 50 for € 60,44 ea. 100 for € 57,26 ea. 500 for € 54,07 ea. More information Delivered in 7 to 35 days Sold per piece€ 70,00 Incl. VATAdd to cart
- PETG Filament 1.75mm - 1kg - Raspberry Red Devil Design This PETG Filament with a diameter of 1.75mm (± 0.05 mm tolerance) and a raspberry red color is delivered on a spool of 1kg. The recommended temperature for the hotend is 220-250 °C and 70-80 °C for the heatbed. 10 for € 13,93 ea. 25 for € 13,65 ea. 50 for € 13,38 ea. 100 for € 13,11 ea. 500 for € 12,84 ea. More information Delivered in 7 to 35 days Sold per piece€ 14,20 Incl. VATAdd to cart
- PETG Filament 1.75mm - 1kg - Purple Devil Design This PETG Filament with a diameter of 1.75 mm (± 0.05 mm tolerance) and a purple color is supplied on a 1 kg spool. The recommended temperature for the hot end is 220-250 ° C and 70-80 ° C for the heat bed. 10 for € 13,89 ea. 25 for € 13,59 ea. 50 for € 13,29 ea. 100 for € 12,98 ea. 500 for € 12,67 ea. More information Delivered in 7 to 35 days Sold per piece€ 14,20 Incl. VATAdd to cart
- ABS + Filament 1.75mm - 1kg - Gray Devil Design This gray ABS + Filament with a diameter of 1.75 mm (± 0.05 mm tolerance) is supplied on a 1 kg spool. The recommended temperature for the hot end is 210-230 ° C and 20-80 ° C for the heat bed. More information Delivered in 7 to 35 days Sold per piece€ 14,20 Incl. VATAdd to cart
- ABS + Filament 1.75mm - 1kg - Bright yellow Devil Design This bright yellow ABS + Filament with a diameter of 1.75 mm (± 0.05 mm tolerance) is supplied on a 1 kg spool. The recommended temperature for the hot end is 210-230 ° C and 20-80 ° C for the heat bed. More information Delivered in 7 to 35 days Sold per piece€ 14,20 Incl. VATAdd to cart
- PETG Filament 1.75mm - 1kg - Black Devil Design #DEV-PETG-1.75-BL This PETG Filament with a diameter of 1.75mm (± 0.05 mm tolerance) and a black color is delivered on a spool of 1kg. The recommended temperature for the hotend is 220-250 °C and 70-80 °C for the heatbed. 10 for € 14,20 ea. 25 for € 13,91 ea. 50 for € 13,61 ea. 100 for € 13,33 ea. 500 for € 13,03 ea. More information In stock Sold per piece€ 14,50 Incl. VATAdd to cart
- PETG Filament 1.75mm - 2kg - Black Devil Design #DDPETG1.75M2KG-BLACK This PETG Filament with a diameter of 1.75mm (± 0.05 mm tolerance) and a black color is delivered on a spool of 2kg. The recommended temperature for the hotend is 220-250 °C and 70-80 °C for the heatbed. 10 for € 29,19 ea. 25 for € 28,59 ea. 50 for € 27,99 ea. 100 for € 27,39 ea. 500 for € 26,79 ea. More information In stock Sold per piece€ 29,80 Incl. VATAdd to cart
- PETG Filament 1.75mm - 6 rolls of 0.33kg - Starter kit Devil Design PETG Filament 1.75mm - 6 rolls of 0.33kg - Starter kit. This PETG Filament starter pack contains 1.75mm (± 0.05mm tolerance) filament with the colors White, Light Yellow, Red, Light Green, Super Blue and Black on loose rolls of 0.33kg. 10 for € 28,48 ea. 25 for € 27,88 ea. 50 for € 27,28 ea. 100 for € 26,69 ea. 500 for € 26,09 ea. More information In stock Sold per piece€ 29,10 Incl. VATAdd to cart
- PLA Filament 1.75mm - 1kg - Pink Devil Design This PLA Filament with a diameter of 1.75mm (± 0.05mm tolerance) and a pink color is supplied on a 1kg spool. The recommended temperature for the hotend is 200-235 ° C and 50-60 ° C for the heatbed. 10 for € 15,43 ea. 25 for € 15,- ea. 50 for € 14,58 ea. 100 for € 14,16 ea. 500 for € 13,74 ea. More information In stock Sold per piece€ 15,85 Incl. VATAdd to cart
- PETG Filament 1.75mm - 1kg - Brown Devil Design This PETG Filament with a diameter of 1.75 mm (± 0.05 mm tolerance) and a brown color is supplied on a 1 kg spool. The recommended temperature for the hot end is 220-250 ° C and 70-80 ° C for the heat bed. 10 for € 13,93 ea. 25 for € 13,65 ea. 50 for € 13,37 ea. 100 for € 13,10 ea. 500 for € 12,83 ea. More information In stock Sold per piece€ 14,20 Incl. VATAdd to cart
- PLA Filament 1.75mm - 1kg - Black Devil Design This PLA Filament with a diameter of 1.75mm (± 0.05 mm tolerance) and a black color is delivered on a spool of 1kg. The recommended temperature for the hotend is 200-235 °C and 50-60 °C for the heatbed. 10 for € 13,92 ea. 25 for € 13,63 ea. 50 for € 13,35 ea. 100 for € 13,07 ea. 500 for € 12,78 ea. More information In stock Sold per piece€ 14,20 Incl. VATAdd to cart
- PLA Filament 1.75mm - 1kg - Gray Devil Design This PLA Filament with a diameter of 1.75mm (± 0.05 mm tolerance) and a gray color is delivered on a spool of 1kg. The recommended temperature for the hotend is 200-235 °C and 50-60 °C for the heatbed. 10 for € 13,94 ea. 25 for € 13,67 ea. 50 for € 13,40 ea. 100 for € 13,14 ea. 500 for € 12,87 ea. More information In stock Sold per piece€ 14,20 Incl. VATAdd to cart
- PETG Filament 1.75mm - 1kg - Transparent green Devil Design This PETG Filament with a diameter of 1.75 mm (± 0.05 mm tolerance) and a transparent green color is supplied on a 1 kg spool. The recommended temperature for the hot end is 220-250 ° C and 70-80 ° C for the heat bed. 10 for € 13,93 ea. 25 for € 13,66 ea. 50 for € 13,39 ea. 100 for € 13,12 ea. 500 for € 12,85 ea. More information In stock Sold per piece€ 14,20 Incl. VATAdd to cart
- PETG Filament 1.75mm - 1kg - Transparent Devil Design This PETG Filament with a diameter of 1.75mm (± 0.05 mm tolerance) is delivered on a spool of 1kg. The recommended temperature for the hotend is 220-250 °C and 70-80 °C for the heatbed. The size of the spool is 200mm x 70mm and comes in a sealed package with moisture absorbing agent. 10 for € 13,92 ea. 25 for € 13,64 ea. 50 for € 13,36 ea. 100 for € 13,08 ea. 500 for € 12,80 ea. More information In stock Sold per piece€ 14,20 Incl. VATAdd to cart
- TPU Filament 1.75mm - 1kg - Black Devil Design This black TPU Filament with a diameter of 1.75 mm (± 0.05 mm tolerance) is supplied on a 1 kg spool. TPU is very flexible material and can be printed without heatbed, the disadvantage is the printing speed, which is very slow. 10 for € 25,03 ea. 25 for € 24,74 ea. 50 for € 24,45 ea. 100 for € 24,16 ea. 500 for € 23,88 ea. More information In stock Sold per piece€ 25,35 Incl. VATAdd to cart
- PLA Filament 1.75mm - 1kg - Smaragd Groen Devil Design Dit PLA Filament met een diameter van 1.75mm ( ± 0.05 mm tolerantie) en een smaragd groene kleur wordt geleverd op een spoel van 1kg. De aanbevolen temperatuur voor de hotend is 200-235 °C en 50-60 °C voor het heatbed. 10 for € 13,92 ea. 25 for € 13,64 ea. 50 for € 13,36 ea. 100 for € 13,08 ea. 500 for € 12,80 ea. More information In stock Sold per piece€ 14,20 Incl. VATAdd to cart
- -17 % PETG Filament 1.75mm - 1kg - Bright pink Devil Design This PETG Filament with a diameter of 1.75 mm (± 0.05 mm tolerance) and a bright pink color is supplied on a 1 kg spool. The recommended temperature for the hot end is 220-250 ° C and 70-80 ° C for the heat bed. 10 for € 11,60 ea. 25 for € 11,36 ea. 50 for € 11,13 ea. 100 for € 10,89 ea. 500 for € 10,65 ea. More information In stock Sold per piece€ 14,35 € 11,85 Incl. VATAdd to cart
- PETG Filament 1.75mm - 1kg - White Devil Design This PETG Filament with a diameter of 1.75mm (± 0.05 mm tolerance) and a white color is delivered on a spool of 1kg. The recommended temperature for the hotend is 220-250 °C and 70-80 °C for the heatbed. 10 for € 13,94 ea. 25 for € 13,68 ea. 50 for € 13,42 ea. 100 for € 13,15 ea. 500 for € 12,89 ea. More information In stock Sold per piece€ 14,20 Incl. VATAdd to cart
- PETG Filament 1.75mm - 1kg - Super blue Devil Design This PETG Filament with a diameter of 1.75mm (± 0.05 mm tolerance) and a dark blue color is delivered on a spool of 1kg. The recommended temperature for the hotend is 220-250 °C and 70-80 °C for the heatbed. 10 for € 13,92 ea. 25 for € 13,63 ea. 50 for € 13,34 ea. 100 for € 13,06 ea. 500 for € 12,77 ea. More information In stock Sold per piece€ 14,20 Incl. VATAdd to cart
- ABS+ Filament 1.75mm - 6x0,33kg - Starterkit Devil Design This ABS+ Filament starter pack contains 1.75mm (± 0.05mm tolerance) filament with the colors White, Light Yellow, Red, Light Green, Super Blue and Black on individual rolls of 0.33 kg. The recommended temperature for the hotend is 230-240 °C and 90-100 °C for the heatbed. 10 for € 27,82 ea. 25 for € 27,17 ea. 50 for € 26,51 ea. 100 for € 25,85 ea. 500 for € 25,20 ea. More information In stock Sold per piece€ 28,50 Incl. VATAdd to cart
- PLA Filament 1.75mm - 1kg - Natural Devil Design This PLA Filament with a diameter of 1.75mm (± 0.05 mm tolerance) and a natural color is delivered on a spool of 1kg. The recommended temperature for the hotend is 200-235 °C and 50-60 °C for the heatbed. 10 for € 13,89 ea. 25 for € 13,59 ea. 50 for € 13,29 ea. 100 for € 12,98 ea. 500 for € 12,67 ea. More information In stock Sold per piece€ 14,20 Incl. VATAdd to cart
