Material

Material to build projects such as enclosures, protoboards, breadboards, cables and wiring.

1820 results Sort by

Load previous

Tactile push button yellow - 2 pcs Set of 2 yellow tactile push buttons, complete with nut and washer. Suitable for a wide range of electronic projects with a rating voltage of DC 50V / 0.5A.
Out of stock
€ 2,40 Incl. VAT
Tactile push buttons green - 2 pcs Set of 2 green tactile push buttons, complete with nut and washer. Versatile for various electronic projects with a rating voltage of DC 50V / 0.5A.
Out of stock
€ 1,85 Incl. VAT
Tactile push buttons blue - 2 pcs Set of 2 blue tactile push buttons, complete with nut and washer. Establishes connection when pressed and suitable for a wide range of electronic projects with a rating voltage of DC 50V / 0.5A.
Out of stock
€ 1,30 Incl. VAT
45X magnifying glass with lighting Small and very handy magnifying glass with LED light. This magnifying glass magnifies 45x and is supplemented with 2 LED lights, powered by 3 button cell batteries (LR927).
Out of stock
€ 4,00 Incl. VAT
Male-Male jumper set 65 stuks Very handy set of 65 wires with fixed pins at the ends. The different lengths and colors make it a lot easier to set up a project in a structured way. The set may differ slightly, but generally consists of the following lengths: 4x24cm, 4x20cm, 8x16cm and 49x12cm.
Out of stock
€ 2,45 Incl. VAT
Aluminum servo arm mounting Servo arm mounting for standard servomotors (40 × 20 × 36mm), such as the MG995 and MG996R. This disc has 4 holes for M3 nuts for mounting (included).
Out of stock
€ 1,45 Incl. VAT
Female header stackable 4 pin - 10 stuks This set of 10 long female headers with a 2.54mm pitch and gold plated pins is perfect for building Arduino shields and other high-quality electronic projects. They offer a reliable and durable connection and come in a set of 10 pieces.
Out of stock
€ 2,10 Incl. VAT
Female header stackable 8 pin - 10 stuks This set of 10 long female headers with a 2.54mm pitch and gold plated pins is perfect for building Arduino shields and other high-quality electronic projects. They offer a reliable and durable connection.
Out of stock
€ 3,00 Incl. VAT
Female header stackable 10 pin - 10 stuks This set of 10 long female headers with a 2.54mm pitch and gold plated pins is perfect for building Arduino shields and other high-quality electronic projects. They offer a reliable and durable connection.
Out of stock
€ 3,45 Incl. VAT
Ventilator 40mm 12V 3pin 40x40mm fan to create an airflow that keeps components cooler. This fan works on 12V and has a connector with 3 pins.
Out of stock
€ 3,30 Incl. VAT
Fuseholders 5x20mm Panel mount - 2 pcs This is a set of 2 fuse holders for panel mounting. The fuse holders keep fuses neatly in place and make them easy to replace if they blow.The maximum values are: 15A / 125v 10A / 250v
Out of stock
€ 2,50 Incl. VAT
Fuse fast 1A - 100 pcs Set of 100 quick-response glass fuses, perfect for electronic projects. Dimensions of 5x20mm and a fuse wire strength of 1000mA.
Out of stock
€ 3,20 Incl. VAT
Fuse fast 2A - 100 pcs Set of 100 quick-response glass fuses, ideal for electronic projects requiring quick system disconnection. Dimensions of 5x20mm and a fuse wire strength of 2000mA.
Out of stock
€ 3,10 Incl. VAT
9V Battery connector to 2.1x5.5mm plug - 5 pieces A set of 5x 9V battery connectors with a length of 12cm. These connectors have a 2.1x5.5mm male plug at the end, which can be connected to the Arduino for example.
Out of stock
€ 1,60 Incl. VAT
Male header long 1x40 straight - 5 pieces This set includes 5 pieces of male headers with extra-long pins measuring 2cm. The spacing between the pins is 2.54 mm, which is standard for many electronic applications. These headers are useful for projects where you need extra length for the connections. They are easy to use and can be integrated into various electronic projects.
Out of stock
€ 2,35 Incl. VAT
DC Plug female 5.5mm x 2.1mm to crown stone - 5 pieces This set contains 5 female DC plug to terminal block adapters. The female DC plugs have these dimensions: 5.5mm x 2.1mm. These plugs are suitable for male DC plugs of the same size.
Out of stock
€ 2,50 Incl. VAT
Banana Plug 4mm female - 5x Red + 5x Black Set of 5 red and 5 black female banana plug connectors (11mm) suitable for 4mm plugs. Easy mounting in a housing. Ideal for plug-and-play (measurement) equipment and power supplies.
Out of stock
€ 2,90 Incl. VAT
Female header 2 pin - 2.54mm - 10 pcs This set of 10 female headers with 2 pins and a 2.54 mm pitch is a convenient and reliable choice for various electronic projects. They fit on a standard breadboard and are easy to use.
Out of stock
€ 2,40 Incl. VAT
Female header 3 pin - 2.54mm - 10 pcs This set of 10 female headers with 3 pins and a 2.54 mm pitch is ideal for various electronic projects. They are compatible with standard breadboards and offer a reliable connection for multiple applications.
Delivery time ±40 working day(s)
€ 2,30 Incl. VAT
Female header 4 pin - 2.54mm - 10 pcs This set of 10 female headers with 4 pins and a 2.54mm pitch is suitable for a variety of electronic projects, including breadboards. They offer a reliable and durable connection and come in a set of 10 pieces.
Out of stock
€ 1,70 Incl. VAT
Mini limit switch - 5 pcs A set of 5 mini limit switches with a maximum load of AC 125V 1A, ideal for position and speed detection in a variety of electronic projects.
Out of stock
€ 3,10 Incl. VAT
Copper heatsinks - 13 x 12 x 5 mm - without adhesive strip - 2 pieces This is a set of 2 copper heatsinks with dimensions of 13 x 12 x 5 mm, without adhesive strip. Originally designed for cooling the RAM in video cards, these pure copper heatsinks are also excellent for other applications, such as cooling a Raspberry Pi.
Out of stock
€ 3,15 Incl. VAT
12mm push buttons with white LED - 5 pieces A set of 5 tactile push buttons of 12mm x 12mm with an internal white LED. The buttons work like a normal push button.
Out of stock
€ 5,05 Incl. VAT
Tactiele button 12x12x7,3mm green - 5 pcs Set of 5 momentary switches with green push button and 4 pins. Ideal for projects aiming for a professional look.
Out of stock
€ 2,50 Incl. VAT
Tactiele button 12x12x7,3mm red - 5 pcs Set of 5 momentary switches with red push button and 4 pins. Ideal for projects aiming for a professional look.
Out of stock
€ 2,75 Incl. VAT
Tactile push buttons red - 2 pcs Set of 2 red tactile push buttons, complete with nut and washer. Versatile for various electronic projects with a rating voltage of DC 50V / 0.5A.
Out of stock
€ 2,50 Incl. VAT
Tactile push buttons white - 2 pcs Set of 2 white tactile push buttons, complete with nut and washer. Versatile for a variety of electronic projects with a rating voltage of DC 50V / 0.5A.
Out of stock
€ 2,25 Incl. VAT
50 mm L stepper motor support This black steel mounting bracket fixes the usual stepper motors to your project. This bracket places the stepper motor at a 90 degree angle with a solid connection.
Out of stock
€ 2,10 Incl. VAT
AAA x 3 battery holder This is a battery holder with space for 3x AAA batteries. The battery holder is made of hard plastic. The wires are approximately 24cm long.
Out of stock
€ 2,10 Incl. VAT
Rocker switch round 23mm - 5 pcs This rocker on-off switch with a round design has a mounting diameter of 20mm and a external diameter of 20mm. The switch is made for a maximum load of 6A / 250V AC.
Out of stock
€ 2,95 Incl. VAT
Tactiele button 12x12x7,3mm yellow - 5 pcs Set of 5 momentary switches with yellow push button and 4 pins. Ideal for projects aiming for a professional look.
Out of stock
€ 2,40 Incl. VAT
DC Geared Motor 1:120 Small and cheap DC motor with a gearbox ratio of 1: 120. The gearbox has a reduction in speed, which gives the engine much more power. These engines are ideal for robot platforms, such as robot cars.
Out of stock
€ 1,90 Incl. VAT
Power cable CEE 7/7 90° to C13 - 1 meter This power cable is grounded with a standard European plug with a CEE 13 connector (also known from computer power supplies).
Out of stock
€ 4,20 Incl. VAT
70cm 4pin Female-Female cable - 5 pieces This is a set of 5 female-female cables with a length of 70cm, these cables have 4 wires. On both sides are female connectors with 4 pins.Features: Length: 70cmFemale to femalePin number: 4PinSuitable for: Arduino, 3D Printer
Out of stock
€ 3,95 Incl. VAT
Strip and Cut Tool The Strip and Cut Tool is perfect for stripping and cutting wires from 10AWG to 22AWG, with an indication for wire thickness in both AWG and mm. Indispensable for any electronics enthusiast's tool collection.
Out of stock
€ 4,50 Incl. VAT
Peristaltic pump 12V This peristaltic pump is a fast and powerful pump with a different operation than the known pumps. Because this pump pushes the liquid through the hose through a peristaltic movement, the pump itself never comes into contact with the liquid.
Out of stock
€ 10,65 Incl. VAT
Rocker switch 250V round with blue lamp - 2 pieces Set of 2 round rocker on-off buttons with blue LED, mounting diameter 20mm, outer diameter 23mm, load up to 6A at 250V AC.
Out of stock
€ 1,70 Incl. VAT
USB Soldering iron 8W This USB soldering iron is ideal for some fast soldering work (wires, small components), for desoldering or soldering material that conducts the heat well, this soldering iron is less suitable.
Out of stock
€ 9,65 Incl. VAT
Ventilator 30mm 5V 2pin 30 x 30 mm fan to create an air flow that keeps components cooler. This fan works on 5V and has a connector with 2 pins.
Out of stock
€ 3,50 Incl. VAT
Male headers 2x40 2.54mm black - 5 pieces This set includes 5 male headers with 2x40 pins and a pin spacing of 2.54 mm. A convenient feature of these headers is that they can be broken down per pin into smaller pieces. This makes them versatile and adaptable for various electronic projects. They are easy to install and provide a reliable connection for your components.
Out of stock
€ 2,50 Incl. VAT
USB male to crown stone adapter This USB male plug to terminal block adapter has a compact housing. This adapter is ideal for easily making a USB connector yourself. Soldering is not necessary thanks to the terminal block.
Out of stock
€ 4,10 Incl. VAT
Print terminal block 2 pole blue - 5.12mm pitch - 10 pieces This set of 10 blue terminal blocks with 2 connection points and a 5.12mm pitch is specifically designed for standard experimental boards. They offer a strong and reliable connection with wire sizes ranging from 14 to 22 AWG.
Out of stock
€ 2,65 Incl. VAT
Print terminal block 4 pole 5mm blue - 10 pieces This set of 10 blue terminal blocks with 4 connection points and a 2.56mm pitch is perfect for standard experimental boards. They offer a strong and reliable connection with wire sizes ranging from 14 to 22 AWG.
Out of stock
€ 3,00 Incl. VAT
RJ45 Ethernet female to crown stone adapter This is a female RJ45 ethernet to terminal block adapter. This adapter is ideal for easily making an Ethernet connector yourself. Soldering is not necessary thanks to the terminal block.
Out of stock
€ 5,75 Incl. VAT
M5 Hammer nuts (2020) - 10 pcs Set of 10 M5 T-nuts, perfect for securely fastening aluminum frames like the 2020 profiles. Easy installation and reliable performance.
Out of stock
€ 2,10 Incl. VAT
Electric solenoid lock 12V Electric lock with a mechanism of 10 mm. When 12V is set on this switch, the lock is pulled in within 1 second. When the tension is released, the lock springs out again.
Out of stock
€ 4,90 Incl. VAT
Transparent acrylic base plate for Arduino Uno and breadboard Acrylic base plate for the Arduino Uno and a 400-point breadboard. This bottom plate protects the bottom of the Arduino Uno, eliminating a cause of short circuit. In addition, it is a very useful platform to set up a prototype because the Arduino ...
Out of stock
€ 1,80 Incl. VAT
Rechargeable NiMH Battery Pack: 6.0 V, 2200 mAh, 5x1 AA Cells, JR Connector Pololu #2223 This battery pack comes with 4" leads terminated by a 3-pin JR-style female connector (only two of the pins are used).
Delivered in 5 to 14 days
€ 14,35 Incl. VAT
Rechargeable NiMH Battery Pack: 3.6V, 900 mAh, 3x1 AAA Cells, JR Connector Pololu #2230 This is a rechargeable 3.6V NiMH battery pack with a capacity of 900 mAh. The pack consists of three AAA cells in a single row and a 4" lead terminated by a “JR”-style connector.This battery pack comes with 4" leads terminated by a 3-pin JR-style female connector (only two of the pins are used).
Delivered in 5 to 14 days
€ 7,80 Incl. VAT
Rechargeable NiMH Battery Pack: 3.6V, 2200 mAh, 3x1 AA Cells, JR Connector Pololu #2220 This is a rechargeable 3.6V NiMH battery pack with a capacity of 2200 mAh. The pack consists of three AA cells in a single row and a 4" lead terminated by a “JR”-style connector.This battery pack comes with 4" leads terminated by a 3-pin JR-style female connector (only two of the pins are used).
Delivered in 5 to 14 days
€ 9,45 Incl. VAT

Viewed 50 of 1820 productsShow more

Customer reviews about Material



Evelyn25X25mm 3M Double Sided Adhesive Thermal Tape - 10pcs Sticks well and seems to dissipate heat well, time will tell.
MarkCopper tape 5mm self-adhesive - 50 meters Works very well
Margriet de GraafCopper Tape - 5mm (50ft) Quite narrow tape, but it works well for making a circuit (for making a Christmas card with LED light).
RademakerCopper Tape - 5mm (50ft) Great stuff