3D Printing

CNC (Computer Numerical Control or computer controlled machines) are on the rise. Mainly (self-built) 3D printers are extremely popular.

Filament for 3D printing Mechanical components and hardware for 3D printing Finishing for 3D printed models Controllers for 3D printing Accessories for 3D printing Sensors for 3D printing Belts & pulleys for 3D printing

33 results Sort by

Reduced
-50 %
Opencircuit CNC Shield v3 Opencircuit The CNC Shield v3 is made for the control of 3D printers, milling and engraving machines. This shield fits the Arduino UNO. This board has 4 sockets for the installation of a stepper motor driver, such as the A4988. Only 2 channels per motor are required to control this motor.
In stock
€ 5,50 € 2,75 Incl. VAT
Reduced
-50 %
Opencircuit DRV8825 stepper motor driver module with soldered bases + heat sink Opencircuit The DRV8825 is a complete microstep motor driver with integrated encoder. Like the A4988 driver, this module can operate in 1, 1/2, 1/4, 1/8 and 1/16 step mode, but can also take 1/32 step.
In stock
€ 4,50 € 2,25 Incl. VAT
Reduced
-50 %
Opencircuit CNC Shield v4 Arduino Nano Opencircuit The CNC Shield v4 is made for the control of 3D printers, milling and engraving machines. This version of the shield has 1 motor driver less than its predecessor, but is more compact and has room for an Arduino Nano.
In stock
€ 5,40 € 2,70 Incl. VAT
Reduced
-50 %
Opencircuit LJ18A3-8-Z / BX Proximity sensor N / O NPN 8mm Opencircuit This proximity sensor detects an iron object with a maximum distance of 8 mm from the sensor. The sensor works as an NPN transistor (normally open).
In stock
€ 6,30 € 3,15 Incl. VAT
Reduced
-50 %
Opencircuit Ventilator 40x20mm 24V 2pin - glijlager Opencircuit 40x40mm fan to create an airflow that keeps components cooler. This fan runs on 24V and has a connector with 2 pins.
In stock
€ 3,70 € 1,85 Incl. VAT
Reduced
-50 %
DFRobot Gravity: Digital Crash Sensor (Right) DFRobot #SEN0138-R A miniature snap-action switch (right lever), also trademarked and frequently known as a micro switch, is an electric switch that is actuated by very little physical force.
In stock
€ 2,80 € 1,40 Incl. VAT
Reduced
-49 %
Opencircuit Extruder nozzle 0.8mm for 1.75mm filament - 2 pieces Opencircuit A set of 2 nozzles with an opening of 0.8mm for printing filament in a 3D printer. These nozzles are universal and interchangeable with different sizes of the opening.
In stock
€ 2,65 € 1,35 Incl. VAT
Reduced
-50 %
Whadda End stop switch (2 pieces) Whadda #WPM327 This end stop switch makes it possible to detect the opening of doors, obstacles for robots and the end positions in 3D printers.
In stock
€ 8,90 € 4,45 Incl. VAT
Sale
-75 %
SILK Filament Blue - 1.75 - 1kg - Devil Design Devil Design #DDSILK1.75_BLUE_1KG Blue SILK filament with a diameter of 1.75mm on a 1kg spool. Recommended hotend temperature is 225-245 °C, and for the heatbed 50-60 °C. Supplied in a sealed package with moisture absorbent.
In stock
€ 21,10 € 5,30 Incl. VAT
Opencircuit Ventilator 40mm 12V 3pin Opencircuit 40x40mm fan to create an airflow that keeps components cooler. This fan works on 12V and has a connector with 3 pins.
Out of stock
€ 3,15 Incl. VAT
Opencircuit A3967 EasyDriver Stepper motor driver module V44 Opencircuit This is an easy-to-use stepper motor driver, which is controlled with 3.3V or 5V. The EasyDriver requires a voltage of 7V to 30V for controlling the motor. The EasyDriver can control bi-polar motors, and 4, 6, or 8-phase stepper motors.
Out of stock
€ 5,40 Incl. VAT
Opencircuit LJ12A3-4-Z / BX Proximity sensor N / O NPN 4mm Opencircuit This proximity sensor detects a metal object with a maximum distance of 4 mm from the sensor. The sensor works as an NPN transistor (normally open), which means that the voltage is cut off when a...
Out of stock
€ 4,50 Incl. VAT
Opencircuit 50 mm L stepper motor support Opencircuit This black steel mounting bracket fixes the usual stepper motors to your project. This bracket places the stepper motor at a 90 degree angle with a solid connection.
Out of stock
€ 5,00 Incl. VAT
Opencircuit Power supply socket 3-in-1 fuse, socket and switch Opencircuit Socket with connection point for 230v C14 plug. Furthermore, this module has a fuse holder of 5x20mm and an illuminated on / off switch (red).
Out of stock
€ 3,80 Incl. VAT
Opencircuit Power cable CEE 7/7 90° to C13 - 1 meter Opencircuit This power cable is grounded with a standard European plug with a CEE 13 connector (also known from computer power supplies).
Out of stock
€ 4,00 Incl. VAT
Opencircuit 1m Kabelrups 10x20mm Opencircuit With this cable chain (cable chain) with an inside size of 10x20mm, wires are protected against damage and breakages because they are bent too far. This e-chain® is especially necessary when connecting to moving parts such as with 3D printers and CNC machines.
Out of stock
€ 6,00 Incl. VAT
Opencircuit 100K Thermistor NTC 3950 with 1 meter cable Opencircuit A 100K (1%) NTC 3950 type thermistor. This thermistor is connected to 2 meter wires so that it can be used immediately.
Out of stock
€ 2,50 Incl. VAT
Opencircuit Nema 17 Step motor 48mm - 12V / 24V - 1.7A Opencircuit This bipolar stepper motor (1.7A) is very popular in CNC applications such as 3D printing. This motor can move in 1.8 degree steps. The shaft of this motor is 5 mm thick and 24 mm long. The engine also has a holding torque of up to 4.5 kg per centimeter.
Out of stock
€ 12,05 Incl. VAT
Opencircuit Stepper motor bracket 42x60mm - horizontal Opencircuit This black steel mounting bracket fixes the usual stepper motors to your project. This bracket puts the stepper motor in a horizontal position.
Out of stock
€ 3,00 Incl. VAT
Opencircuit 3D Printer controller RAMPS 1.6 Opencircuit This sign is designed to accommodate all necessary electronics from the RepRap printer. Motor drivers and motors can be connected to this board. There are also connections for the limit switches, thermistors and heaters.
Out of stock
€ 13,45 Incl. VAT
Velleman 13-pc heavy-duty knife set Velleman #VTK7 This knife set contains 3 aluminum knife holders with 3 blades and 10 spare blades. The precision blades are delivered in different shapes and sizes so that a suitable knife is available for every project.
Delivered in 3 to 7 days
€ 8,00 Incl. VAT
Velleman Diamond file set - 5pcs Velleman #VTDF2 The Velleman VTDF2 is a 5-piece diamond file set, perfect for smoothing and shaping tasks. Each 120mm, powder-coated file ensures durability and precision. A must-have for every toolbox!
Delivered in 3 to 7 days
€ 17,00 Incl. VAT
Pololu Stepper Motor with 28cm Lead Screw: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase Pololu #2268 This NEMA 17-size hybrid bipolar stepping motor has an integrated 28 cm (11″) threaded rod as its output shaft, turning it into a linear actuator capable of precision open-loop positioning.
Delivered in 5 to 14 days
€ 135,00 Incl. VAT
Pololu Stepper Motor with 18cm Lead Screw: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase Pololu #2689 This NEMA 17-size hybrid bipolar stepping motor has an integrated 18 cm (7″) threaded rod as its output shaft, turning it into a linear actuator capable of precision open-loop positioning.
Delivered in 5 to 14 days
€ 139,55 Incl. VAT
Pololu Stepper Motor with 38cm Lead Screw: Bipolar, 200 Steps/Rev, 42×38mm, 2.8V, 1.7 A/Phase Pololu #2690 This NEMA 17-size hybrid bipolar stepping motor has an integrated 38 cm (15″) threaded rod as its output shaft, turning it into a linear actuator capable of precision open-loop positioning.
Delivered in 5 to 14 days
€ 203,15 Incl. VAT
Pololu Traveling Nut for TR8×8(P2) Threaded Rods Pololu #2688 This copper alloy traveling nut is intended for use with Tr8×8(P2) threaded rods and features a mounting flange with four holes threaded for M3 screws. This is the same nut that is included with our stepper motors with lead screw.
Delivered in 5 to 14 days
€ 12,75 Incl. VAT
Sparkfun Thermistor 10K Sparkfun #SEN-00250 Get accurate temperature readings with the Sparkfun 10K Thermistor. Ideal for various temperature control applications. Reliable, easy to use, and sourced from Vishay. Includes one thermistor per purchase.
Delivered in 5 to 10 days
€ 3,65 Incl. VAT
Sale
-50 %
ABS+ Filament Red - 1.75 - 1kg - Devil Design Devil Design #DDABS+1.75_RED_1KG Red ABS+ filament with a diameter of 1.75mm on a 1kg spool. Recommended hotend temperature is 230-240 °C, and for the heatbed 90-100 °C. Supplied in a sealed package with moisture absorbent.
No longer available
€ 17,90 € 8,95 Incl. VAT
DFRobot 5V Metal Proximity Switch DFRobot #FIT0658 The proximity switch usually possesses the characteristics of travel switch, micro switch and sensor. This is a small 5V metal proximity switch with 27*10*6mm size, which can be easily mounted in tight space. It features NPN (normally open) output, 4mm detection distance, 1000Hz switching frequency.
Delivered in 5 to 10 days
€ 13,75 Incl. VAT
Opencircuit 3D Touch Auto bed Leveling Sensor Opencircuit The 3D touch is a sensor for automatic bed levelling. After using the sensor, it is automatically retracted so that it does not get in the way during 3D printing.
Out of stock
€ 20,20 Incl. VAT
DFRobot Gravity: Digital Crash Sensor (Left) DFRobot #SEN0138-L A miniature snap-action switch (left lever), also trademarked and frequently known as a micro switch, is an electric switch that is actuated by very little physical force.
Delivered in 5 to 10 days
€ 2,75 Incl. VAT
Opencircuit Extruder nozzle 0.4mm for 1.75mm filament - 2 pieces Opencircuit A set of 2 nozzles with an opening of 0.4mm for printing filament in a 3D printer. These nozzles are universal and interchangeable with different sizes of the opening.
Out of stock
€ 2,85 Incl. VAT
Opencircuit LJ18A3-8-Z/BX - 5V Proximity sensor N/O NPN 8mm Opencircuit This proximity sensor is used to detect surfaces for contactless switching of devices. When the proximity switch is near a target object, it will behave like a closed NPN switch.
Out of stock
€ 8,50 Incl. VAT

CNC (Computer Numerical Control or computer controlled machines) are on the rise. Mainly (self-built) 3D printers are extremely popular. This group contains various mechanics, controllers and accessories to build your own CNC system.

Customer reviews about 3D Printing



RobOpencircuit LJ18A3-8-Z/BX - 5V Proximity sensor N/O NPN 8mm Works great with my water meter.
Andre KosterOpencircuit Ventilator 40x20mm 24V 2pin - glijlager Dimensions are fine, cools well, therefore makes a bit of noise. Good material with print connector. Plug in and turn.
JosOpencircuit Power supply socket 3-in-1 fuse, socket and switch Good solution, doesn't cost much
RuubOpencircuit LJ12A3-4-Z / BX Proximity sensor N / O NPN 4mm Does it work well, can sink enough current to ground (certainly more than 100 mA), must come really close to the metal for good detection, indeed according to specs best at 2 mm.
RoelofOpencircuit LJ18A3-8-Z/BX - 5V Proximity sensor N/O NPN 8mm Searching for a long time for a water meter sensor (Elster V200 with coil) that really works. And that's this one!
Jan MelisOpencircuit LJ18A3-8-Z / BX Proximity sensor N / O NPN 8mm Works fine