12v 10A relay with 433MHz receiver

A small and powerful 12V relay module with 433MHz receiver. The relay can switch up to 10A in 4 modes (toggle, momentary, latching, timer [5, 10 and 15s]) and is securely packaged with a 433MHz receiver in a plastic housing.

Please note, no remote control is included. Only fixed or learning code (2262 2264 2260 2240 1527) 433 MHz remote controls are suitable.

Momentary mode (The relay is switched on as long as the button is pressed).
Click once on the 'learning' button on the module, wait until the LED goes out.
Press the desired button on the remote control, the LED flashes once and turns on again after 3 seconds.

Toggle mode (The relay is switched on at the push of a button and off when the same button is pressed again).
Click twice on the 'learning' button on the module, wait until the LED goes out.
Press the desired button on the remote control, the LED flashes once and turns on again after 3 seconds.

Latching mode (The relay is switched on with button 1 and switched off with button 2).
Click 3 times on the 'learning' button on the module, wait until the LED goes out.
Press the desired button (on) on the remote control, the LED will now flash 5 times.
Press the desired button (off) on the remote control, the LED will now flash 5 times.
The LED turns on again after 3 seconds.

Delay mode (The relay is switched on at the push of a button and is automatically switched off again after 5, 10 or 15 seconds).
Click (4 times for 5s, 5 times for 10s and 6 times for 15s) on the 'learning' button on the module, wait until the LED goes out.
Press the desired button on the remote control, the LED flashes once and turns on again after 3 seconds.

Delete settings
Click the 'learning' button on the module 8 times.