2-in-1 smd hot air rework station

With the VTSS230 soldering station, you can virtually solder everything on a printed circuit board through the 2-in-1 setup. This station contains a normal soldering iron and a hot air soldering iron for (de) soldering SMD components.

Soldering iron
The soldering iron has a capacity of 60 watts and is adjustable so that you can set a precise temperature. The temperature is adjustable from 50 to 480 ° C.

Hot air soldering iron
The hot air soldering iron consists of a powerful heater of no less than 300 watts with a blower. Both the capacity of the heater and the speed of the blower are adjustable, so you can solder each component in the right way. The hot air bolt is mainly used for soldering and desoldering SMD components, but it is also very suitable for shrinking tubing.

Specifications
With soldering iron and hot air pump
For the (de) soldering of SMD components
Temperature display in ° C & ° F
Easily adjustable temperature (buttons up / down)
Calibration from 3 L / min to 24 L / min
Microprocessor controlled temperature
The rubber grip ensures continuous use without fatigue or overheating (non-flammable)
Consumption:
Soldering iron: 24 V, 60 W
Hot air pump: 300 W
Power supply: 220-240 VAC 50 Hz
Temperature range:
Soldering iron: 50 - 480 ° C
Hot air pump: 100 - 500 ° C
Dimensions: 113 x 125 x 175 mm
Weight: 2 kg