Free shipping from € 1.000
Reward Points
Language( EN )
Nederlands( NL )
Français( FR )
English( EN )
Español( ES )
Currency( € )
Euro( € )
LoginWishlist
Our new products
60 resultsSort by
- NewBitMaker Lite - Grove Expansion Board for Micro:bit (3 Grove Ports)Seeedstudio #114991850 The BitMaker Lite is essentially a micro:bit shield, which breaks out the micro:bit connections and makes it easy for you to interface with other devices through the broken out pins, Grove ports for additional Grove sensors, as well an onboard buzzer. 10 voor € 10,05 p.s.25 voor € 9,70 p.s.50 voor € 9,30 p.s.100 voor € 8,95 p.s.500 voor € 8,55 p.s.More information Delivered in 5 to 10 daysSold per piece€ 10,45 Incl. VATAdd to cart
- NewGrove - Rotary Angle SensorSeeedstudio #101020017 The potentiometer twig produces analog output between 0 and Vcc (5V DC with Seeeduino) on its D1 connector. The D2 connector is not used. The angular range is 300 degrees with a linear change in value. The resistance value is 10k ohms, perfect for Arduino use. 10 voor € 3,95 p.s.25 voor € 3,75 p.s.50 voor € 3,55 p.s.100 voor € 3,35 p.s.500 voor € 3,15 p.s.More information Delivered in 5 to 10 daysSold per piece€ 4,15 Incl. VATAdd to cart
- NewGrove - Touch SensorSeeedstudio #101020037 This is a simple touch sensor module. You can use it to replace a traditional push button. Using the TTP223-B touch detector IC It measures the capacitance of a metallic pad. It can detect the change in capacitance when a finger is near it. 10 voor € 4,95 p.s.25 voor € 4,75 p.s.50 voor € 4,50 p.s.100 voor € 4,30 p.s.500 voor € 4,05 p.s.More information Delivered in 5 to 10 daysSold per piece€ 5,20 Incl. VATAdd to cart
- NewGrove - LED PackSeeedstudio #104020228 This Grove - LED Pack includes 4 kinds of different colors of LED which are red, green, blue, and white. The LED can be easily plugged on the LED Pack, and there is a spin button that can control the luminance of the LED. 10 voor € 3,50 p.s.25 voor € 3,25 p.s.50 voor € 3,05 p.s.100 voor € 2,80 p.s.500 voor € 2,60 p.s.More information Delivered in 5 to 10 daysSold per piece€ 3,70 Incl. VATAdd to cart
- NewGrove - Piezo Buzzer / Active Buzzer - Arduino / Raspberry Pi CompatibleSeeedstudio #107020000 This is a simple yet enjoyable twig to use. The piezo can be connected to digital outputs and will emit a tone when the output is high. Alternatively, it can be connected to an analog pulse-width modulation output to generate various tones and effects. 10 voor € 2,90 p.s.25 voor € 2,70 p.s.50 voor € 2,50 p.s.100 voor € 2,30 p.s.500 voor € 2,15 p.s.More information Delivered in 5 to 10 daysSold per piece€ 3,10 Incl. VATAdd to cart
- NewPETG Filament 1.75mm - 1kg - Bright YellowDevil Design This PETG Filament with a diameter of 1.75 mm (± 0.05 mm tolerance) and a bright yellow color is supplied on a 1 kg spool. The recommended temperature for the hot end is 220-250 ° C and 70-80 ° C for the heat bed. More information Delivered in 7 to 14 daysSold per piece€ 19,80 Incl. VATAdd to cart
- NewPETG Filament 1.75mm - 1kg - BeigeDevil Design This PETG Filament with a diameter of 1.75 mm (± 0.05 mm tolerance) and a beige color is supplied on a 1 kg spool. The recommended temperature for the hot end is 220-250 ° C and 70-80 ° C for the heat bed. More information Delivered in 7 to 14 daysSold per piece€ 18,85 Incl. VATAdd to cart
- New20.4:1 Metal Gearmotor 25Dx50L mm HP 12VPololu #3203 This gearmotor consists of a high-power, 12 V brushed DC motor combined with a 20.4:1 metal spur gearbox. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in diameter and extends 12.5 mm from the face plate of the gearbox. 10 voor € 20,05 p.s.25 voor € 19,15 p.s.50 voor € 18,25 p.s.100 voor € 17,35 p.s.500 voor € 16,45 p.s.More information Delivered in 3 to 10 daysSold per piece€ 20,95 Incl. VATAdd to cart
- NewExplorer HAT Pro Parts KitPimoroni #PIM089 Everything you need to get started with Explorer HAT Pro or Explorer pHAT! The parts kit contains LEDs, a buzzer, resistors and capacitors, rotary potentiometers (dials), a shift register, jumper wires, and even an analog temperature sensor! 10 voor € 14,10 p.s.25 voor € 13,50 p.s.50 voor € 12,90 p.s.100 voor € 12,35 p.s.500 voor € 11,75 p.s.More information Delivered in 5 to 10 daysSold per piece€ 14,70 Incl. VATAdd to cart
- NewExplorer HAT ProPimoroni #PIM082 Explorer HAT Pro adds a lot of useful tools to your Raspberry Pi.It has digital inputs and outputs, capacitive touch pads, croc. 10 voor € 22,35 p.s.25 voor € 21,65 p.s.50 voor € 20,90 p.s.100 voor € 20,20 p.s.500 voor € 19,45 p.s.More information Delivered in 5 to 10 daysSold per piece€ 23,10 Incl. VATAdd to cart
- NewExplorer pHATPimoroni #PIM137 Explorer pHAT is the perfect prototyping side-kick for your Raspberry Pi!A more diminutive version of our popular Explorer Hat Pro, it's cheaper and designed to fit perfectly on a Raspberry Pi Zero! 10 voor € 13,20 p.s.25 voor € 12,70 p.s.50 voor € 12,25 p.s.100 voor € 11,80 p.s.500 voor € 11,30 p.s.More information Delivered in 5 to 10 daysSold per piece€ 13,65 Incl. VATAdd to cart
- NewKitronik Linear Actuator Kit - Feetech FS90Kitronik #2595 Our new Linear Actuator converts the circular movement of a 180 degree servo (supplied) into motion in a straight line, one way and then the other. It can be mounted to a project to provide either horizontal or vertical movement. 10 voor € 7,10 p.s.25 voor € 6,80 p.s.50 voor € 6,55 p.s.100 voor € 6,30 p.s.500 voor € 6,05 p.s.More informationIn stockSold per piece€ 7,35 Incl. VATAdd to cart
- NewKitronik Audio Cable for BBC micro:bitKitronik #5622 This is the perfect cable choice for those that want to output music or general sound for the BBC micro:bit, to either headphones or speakers.At one end of the cable are the black and red crocodile clips, which connect to the microbits GND and Pin 0 respectively. 10 voor € 3 p.s.25 voor € 2,85 p.s.50 voor € 2,70 p.s.100 voor € 2,55 p.s.500 voor € 2,40 p.s.More informationIn stockSold per piece€ 3,15 Incl. VATAdd to cart
- NewKitronik ZIP Halo HD for the BBC micro:bitKitronik #5672 The Kitronik Halo HD board for the BBC micro:bit incorporates 60 individually addressable full colour ZIP LEDs. It also breaks out P1 and P2 to a standard 0.1” footprint, it features a MEMS microphone for detection of sound, and a piezo buzzer to play sound. 10 voor € 25,75 p.s.25 voor € 25,25 p.s.50 voor € 24,75 p.s.100 voor € 24,25 p.s.500 voor € 23,75 p.s.More informationIn stockSold per piece€ 26,25 Incl. VATAdd to cart
- New-1 %Push Button Panel Mount 12MM with Wire (20cm)Cytron #SW-PBM-12R-W OK, this item is pretty simple yet practical - it's a panel mount pushbutton with red button on top, no LEDs, no bells & whistles. But there is 20 cm long of jumper wire in Black and Red to ease the connection or interface to controller of your choice. 10 voor € 1,90 p.s.25 voor € 1,80 p.s.50 voor € 1,70 p.s.100 voor € 1,60 p.s.500 voor € 1,50 p.s.More informationIn stockSold per piece€ 2,02€ 2,00 Incl. VATAdd to cart
- NewDIY Solar Powered FanCytron #DIY-WSOLAR-FAN Get this kit to keep your kids occupied with hands-on activities while enjoying the wind from renewable energy - solar-powered fan. A green energy fan. Keep you cool under the hot sun :) This DIY kit is simple enough to be built by 4 years old children, with parent's help. 10 voor € 3,85 p.s.25 voor € 3,65 p.s.50 voor € 3,45 p.s.100 voor € 3,25 p.s.500 voor € 3,05 p.s.More informationIn stockSold per piece€ 4,05 Incl. VATAdd to cart
- NewArgon One Aluminum Multifunction Case for RPi 4BArgon40 #BO-RPI4-AG-ONE If you are looking for a perfect and elegant enclosure for your powerful Raspberry Pi 4 Model B single board computer, you are at the right page! This Argon ONE Aluminum case has the highest rate among makers and the community. More informationIn stockSold per piece€ 37,50 Incl. VATAdd to cart
- NewExtended GPIO Female Header - 2x20 Pin (13.5mm/9.80mm)Sparkfun #PRT-16764 This 2x20 pin female header is meant to allow you to extend the reach of any board with the standard 2x20 GPIO pin footprint like the Raspberry Pi, Google Coral, and NVIDIA Jetson. You can also solder it to Pi HATs that do not have headers on the board. More informationIn stockSold per piece€ 2,10 Incl. VATAdd to cart
- NewAdafruit PyBadge LC - MakeCode Arcade, CircuitPython or ArduinoAdafruit #3939 What's the size of a credit card and can run CircuitPython, MakeCode Arcade or Arduino even when you're on a budget? That's right, it's the Adafruit PyBadge LC! 10 voor € 31,15 p.s.25 voor € 30,25 p.s.50 voor € 29,30 p.s.100 voor € 28,40 p.s.500 voor € 27,45 p.s.More informationIn stockSold per piece€ 32,10 Incl. VATAdd to cart
- NewAdafruit Metro M4 feat. Microchip ATSAMD51Adafruit #3382 Are you ready? Really ready? Cause here comes the fastest, most powerful Metro ever. The Adafruit Metro M4 featuring the Microchip ATSAMD51. This Metro is like a bullet train, with it's 120MHz Cortex M4 with floating point support. 10 voor € 32,80 p.s.25 voor € 31,95 p.s.50 voor € 31,15 p.s.100 voor € 30,30 p.s.500 voor € 29,50 p.s.More information Delivered in 10 to 30 daysSold per piece€ 33,60 Incl. VATAdd to cart
- NewKitronik ZIP Tile for BBC microbitKitronik #5645 The Kitronik ZIP Tile is an 8 x 8 display panel for the BBC micro:bit. It can scroll text, show all the colours of the rainbow (and more) and multiple Tiles can be linked up to make even bigger displays! 10 voor € 20,70 p.s.25 voor € 20 p.s.50 voor € 19,30 p.s.100 voor € 18,65 p.s.500 voor € 17,95 p.s.More informationIn stockSold per piece€ 21,42€ 21,40 Incl. VATAdd to cart
- NewMicro:Maqueen Plus - an Advanced STEM Education Robot for micro:bit (without micro:bit)DFRobot #MBT0021-EN Micro: Maqueen Plus is an advanced version of micro:Maqueen Lite (4.0), which is more powerful and intelligent.Optimized with better power management and larger capacity power supply, it can be perfectly compatible with HuskyLens AI Vision Sensor, which makes it an accessible AI robot teaching tool. 10 voor € 59,95 p.s.25 voor € 59,35 p.s.50 voor € 58,80 p.s.100 voor € 58,20 p.s.500 voor € 57,65 p.s.More informationIn stockSold per piece€ 60,50 Incl. VATAdd to cart
- New-14 %Gravity: HUSKYLENS - An Easy-to-use AI Machine Vision SensorDFRobot #SEN0305 HuskyLens is an easy-to-use AI machine vision sensor. It is equipped with multiple functions, such as face recognition, object tracking, object recognition, line tracking, color recognition, and tag(QR code) recognition. More informationIn stockSold per piece€ 52,80€ 45,35 Incl. VATAdd to cart
- NewMicro:Maqueen Mechanic - LoaderDFRobot #ROB0156-L Maqueen Loader includes a set of mechanical parts that can turn Maqueen into a loader. This kit contains all the spare parts, such as metal servo, mechanical parts, screws. Just a simple installation, then your Maqueen Car is ready to go! More informationIn stockSold per piece€ 13,10 Incl. VATAdd to cart
- NewCR123A Li-ion Battery Holder for micro: MaqueenDFRobot #FIT0611 This is a Li-ion Battery Holder specially designed for micro: bit educational robot Maqueen. It can be used to hold a CR123A 3.6V lithium rechargeable battery to provide more than 8 hours continuous power for Maqueen. 10 voor € 6,95 p.s.25 voor € 6,80 p.s.50 voor € 6,70 p.s.100 voor € 6,55 p.s.500 voor € 6,45 p.s.More informationIn stockSold per piece€ 7,06€ 7,05 Incl. VATAdd to cart
- NewEnviro+ FeatherWingPimoroni #PIM502 Care about air with Enviro+ FeatherWing. It's packed full of environmental sensors that'll get you started in the world of citizen science. Monitor weather, light level, noise pollution, and air quality, in your local area and contribute your data to better understand trends in air pollution. 10 voor € 43,20 p.s.25 voor € 42,25 p.s.50 voor € 41,35 p.s.100 voor € 40,40 p.s.500 voor € 39,50 p.s.More information Delivered in 5 to 10 daysSold per piece€ 44,10 Incl. VATAdd to cart
- NewMcPower Mirror tool, telescope 16-70cm, Ø mirror 50mmMcPower #1533539 Small tool to view in hard to reach places by means of the telescope arm and mirror. 10 voor € 3,80 p.s.25 voor € 3,55 p.s.50 voor € 3,35 p.s.100 voor € 3,10 p.s.500 voor € 2,90 p.s.More informationIn stockSold per piece€ 4,00 Incl. VATAdd to cart
- NewPeakTech digital energy meterPeakTech #1649076 Newly developed, high-precision energy cost measuring device for registering the energy consumption of electrical appliances and for calculating the electricity consumption of an appliance by entering the electricity price. 10 voor € 21,80 p.s.25 voor € 21,40 p.s.50 voor € 21 p.s.100 voor € 20,60 p.s.500 voor € 20,20 p.s.More informationIn stockSold per piece€ 22,20 Incl. VATAdd to cart
- New-1 %Button cell set, 3V, lithium, 5 piecesGrundig #1300371 Handy set with the most common button cell batteries! Technical details 1x CR2016 1x CR2025 3x CR2032 10 voor € 2,75 p.s.25 voor € 2,55 p.s.50 voor € 2,30 p.s.100 voor € 2,10 p.s.500 voor € 1,90 p.s.More informationIn stockSold per piece€ 2,97€ 2,95 Incl. VATAdd to cart
- NewButton cell set, alkaline and lithium, 24 pieces, 2x (AG1, AG3, AG4, AG5, AG8, AG10, AG12, AG13, CR1620, CR2016, CR2025, CR2032) Very useful! All common button cells (AG1, AG3, AG4, AG5, AG8, AG10, AG12, AG13, CR1620, CR2016, CR2025, CR2032) in one set. 10 voor € 4,80 p.s.25 voor € 4,55 p.s.50 voor € 4,35 p.s.100 voor € 4,15 p.s.500 voor € 3,95 p.s.More informationIn stockSold per piece€ 5,00 Incl. VATAdd to cart
- NewMcPower pick-up tool with magnetic gooseneck, 500 mm, pulling force 1 kgMcPower #1533560 Little helper to get to hard to reach places. 10 voor € 5 p.s.25 voor € 4,70 p.s.50 voor € 4,40 p.s.100 voor € 4,10 p.s.500 voor € 3,80 p.s.More informationIn stockSold per piece€ 5,30 Incl. VATAdd to cart
- NewFreeze spray, 300ml aerosol Freeze, a freeze spray that is used to find faults with a thermal method, ensures rapid cooling to the temperature of –67 ° C, through correct use we can cool assemblies locally, the preparation is perfectly suitable for finding “ cold 10 voor € 7,55 p.s.25 voor € 7,15 p.s.50 voor € 6,70 p.s.100 voor € 6,25 p.s.500 voor € 5,80 p.s.More informationIn stockSold per piece€ 8,01€ 8,00 Incl. VATAdd to cart
- New-1 %Magneet tape, 750 x 25 x 2mm Very handy magnetic tape for attaching all kinds of small parts to different surfaces. The magnetic tape can be shortened to any desired length and is self-adhesive. 10 voor € 3,05 p.s.25 voor € 2,85 p.s.50 voor € 2,70 p.s.100 voor € 2,50 p.s.500 voor € 2,35 p.s.More informationIn stockSold per piece€ 3,22€ 3,20 Incl. VATAdd to cart
- Kitronik :GAME ZIP 64 for the BBC micro:bitKitronik #5626 The Kitronik :GAME ZIP 64 is the ultimate retro gaming accessory for the BBC microbit. It has been designed to be an all in one hand held gaming platform, which also includes a built in, 64 (8x8) individually addressable full colour ZIP LED, screen. 10 voor € 31,70 p.s.25 voor € 31,20 p.s.50 voor € 30,70 p.s.100 voor € 30,20 p.s.500 voor € 29,75 p.s.More informationIn stock Sold per piece€ 32,21€ 32,20 Incl. VATAdd to cart
- Kitronik Simple Robotics Kit for the BBC micro:bitKitronik #5665 Enter the world of robotics with our Simple Robotics kit and build your own easy build microbit controlled robot. It has been designed, from the ground up, to be simple to build by even the youngest of fingers. More informationIn stock Sold per piece€ 25,15 Incl. VATAdd to cart
- Kitronik ARCADE for MakeCode ArcadeKitronik #5319 The MakeCode Arcade editor has been designed to allow everyone, from beginners to experienced game enthusiasts, to create retro arcade games to run in the browser or on handheld consoles. It consists of drag and drop blocks that snap together to form programs. 10 voor € 34,85 p.s.25 voor € 34,40 p.s.50 voor € 34 p.s.100 voor € 33,60 p.s.500 voor € 33,20 p.s.More informationIn stock Sold per piece€ 35,25 Incl. VATAdd to cart
- Kitronik Bluetooth Stereo Amplifier Kit with 2x 100mm 8 ohm speakersKitronik #2160-B Bring your amplifier case design projects up to date with our new Bluetooth Amplifier Kit and play music from a phone, tablet or computer wirelessly. The kit is available in 3 different formats; on its own with no speakers, with 4ohm 65mm speakers included or with 8ohm 100mm speakers included. 10 voor € 34,85 p.s.25 voor € 34,40 p.s.50 voor € 34 p.s.100 voor € 33,60 p.s.500 voor € 33,20 p.s.More informationIn stock Sold per piece€ 35,25 Incl. VATAdd to cart
- Gravity: Analog EMG Sensor by OYMotionDFRobot #SEN0240 This EMG sensor is launched by the cooperation of DFRobot and OYMotion, which can detect sEMG to reflect muscle and neural activities of human.This sensor integrates filtering circuit and amplified circuit. 10 voor € 44,40 p.s.25 voor € 43,40 p.s.50 voor € 42,45 p.s.100 voor € 41,45 p.s.500 voor € 40,50 p.s.More informationIn stock Sold per piece€ 45,36€ 45,35 Incl. VATAdd to cart
- Metal Screw Nut and Mounting Kit -M2DFRobot #FIT0665 The mounting kit is an M2 screw set with screws, nuts and a variety of lengths of single-head, double-pass hexagonal copper columns, for a total of 320 pieces. The M2-size screw set is suitable for motherboards, sensors or other devices with M2 mounting holes (2mm). 10 voor € 14,35 p.s.25 voor € 14,05 p.s.50 voor € 13,80 p.s.100 voor € 13,55 p.s.500 voor € 13,25 p.s.More informationIn stock Sold per piece€ 14,62€ 14,60 Incl. VATAdd to cart
- -16 %Flexible RGB LED Matrix 7x71DFRobot #DFR0597 This flexible RGB LED matrix display has 7x71 RGB LEDs. Designed with flexible PCB board, it is light and bendable. The onboard MCU simplifies the way to display numbers and alphabets. It can keep display status even separated from the main control. 10 voor € 39,95 p.s.25 voor € 39,60 p.s.50 voor € 39,30 p.s.100 voor € 38,95 p.s.500 voor € 38,60 p.s.More informationIn stock Sold per piece€ 48,04€ 40,30 Incl. VATAdd to cart
- -15 %Black Gladiator - Tracked Robot ChassisDFRobot #ROB0153 If you are gonna build a robotics project, then you need to check out this guy, Black Gladiator. He is an agile tracked robot chassis, low noise, and easy to control, which could be a good partner for your any tank-liked robots. 10 voor € 26,10 p.s.25 voor € 26 p.s.50 voor € 25,90 p.s.100 voor € 25,75 p.s.500 voor € 25,65 p.s.More informationIn stock Sold per piece€ 30,80€ 26,20 Incl. VATAdd to cart
- CR2032 3.0v - 230mah knoopcellen - 5 stuksVelleman #CR2032C Specificatiesnom. spanning: 3.0Vtyp. capaciteit: 230mAhIEC: CR2032formaat: -andere: 5004LCafmetingen: 20 x 3.2mmverpakking: 5 batt. in blister 10 voor € 4,65 p.s.25 voor € 4,30 p.s.50 voor € 3,95 p.s.100 voor € 3,60 p.s.500 voor € 3,25 p.s.More informationIn stock Sold per piece€ 5,00 Incl. VATAdd to cart
- -1 %PC104 Header Pin (2x20)Cytron #CN-PH-PC104 2X20 bus connector that compatible with PC/104 industry standard designed for stacking boards with a common bus. More informationIn stock Sold per piece€ 1,76€ 1,75 Incl. VATAdd to cart
- SparkFun RFID Starter Kit - 125kHzSparkfun #KIT-13198 This it the SparkFun RFID Starter Kit, an all-in-one kit that offer everything you need to get your next RFID project off the ground. This kit includes our USB RFID Reader, ID-12LA RFID module, and two 125kHz RFID cards. 10 voor € 49,90 p.s.25 voor € 49,50 p.s.50 voor € 49,05 p.s.100 voor € 48,60 p.s.500 voor € 48,20 p.s.More informationIn stock Sold per piece€ 50,35 Incl. VATAdd to cart
- LattePanda Alpha 864s – Tiny Ultimate Windows / Linux DeviceDFRobot #DFR0546 Introduction Alpha Edition - Generally refers to the leader in a wolf pack, α / Alpha. It will also be the leader in the LattePanda series, the most powerful in performance. Known as the leader of the Pandas, or "AlphaPanda" for short. 10 voor € 491,30 p.s.25 voor € 483,85 p.s.50 voor € 476,40 p.s.100 voor € 468,95 p.s.500 voor € 461,45 p.s.More information Delivered in 3 to 14 days Sold per piece€ 498,75 Incl. VATAdd to cart
- 30:1 Metal Gearmotor 37Dx68L mm 12V with 64 CPR Encoder (Helical Pinion)Pololu #4752 This gearmotor is a powerful 12V brushed DC motor with a 30:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 64 counts per revolution of the motor shaft, which corresponds to 1920 counts per revolution of the gearbox’s output shaft. 10 voor € 29,95 p.s.25 voor € 29,70 p.s.50 voor € 29,40 p.s.100 voor € 29,15 p.s.500 voor € 28,90 p.s.More informationIn stock Sold per piece€ 30,20 Incl. VATAdd to cart
- Enclosure for keypad 4x4, acrylic, kitRobotDyn #CASE-KEYP4x4ACRKIT With this acrylic enclosure and keypad 4x4, you can make proffessional looking keypads for entering numbers, symbols, or navigate in your program. Easy to assemble.*4x4 Keypad not included. 10 voor € 2,95 p.s.25 voor € 2,70 p.s.50 voor € 2,50 p.s.100 voor € 2,25 p.s.500 voor € 2,05 p.s.More informationIn stock Sold per piece€ 3,16€ 3,15 Incl. VATAdd to cart
- Enclosure for keypad 3x4, acrylic, kitRobotDyn #CASE-KEYP3x4ACRKIT With this acrylic enclosure and keypad 3x4, you can make proffessional looking keypads for entering numbers, symbols, or navigate in your program. Easy to assemble. *3x4 Keypad not included. 10 voor € 2,95 p.s.25 voor € 2,75 p.s.50 voor € 2,50 p.s.100 voor € 2,30 p.s.500 voor € 2,05 p.s.More information Delivered in 14 to 30 days Sold per piece€ 3,20 Incl. VATAdd to cart
- DIY Wooden Remote Car (w Batteries)Cytron #DIY-WBAT-RC-CAR Get this kit to keep your kids occupied with hands-on activities while enjoying the "robot" moving around that can be controlled wireless from remote controller when it is completed. This DIY kit is simple enough to be built by 4 years old children, with parent's help. More informationIn stock Sold per piece€ 6,37€ 6,35 Incl. VATAdd to cart
- Raspberry Pi 4 Model B - 8GBRaspberry #RPI4-MODBP-8GB The Raspberry Pi 4 Model B (8 GB) is the latest product in the latest version within the Raspberry Pi range. More informationIn stock Sold per piece€ 105,75 Incl. VATAdd to cart
- 1234 Flat vibration motor Despite its size, this small vibration motor of 12mm wide and 3.4mm thick gives a lot of power. These motors are designed to provide feedback in the form of vibration, such as in a telephone or (game) controllers. 10 voor € 3,05 p.s.25 voor € 2,95 p.s.50 voor € 2,85 p.s.100 voor € 2,75 p.s.500 voor € 2,65 p.s.More informationIn stock Sold per piece€ 3,16€ 3,15 Incl. VATAdd to cart
- 6-Pin Female JST SH-Style Cable 75cmPololu #4764 This 75 cm (30″) cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-entry connectors and with side-entry connectors. The other ends of the wires are unterminated; they can be cut to length to match your application. 10 voor € 2,50 p.s.25 voor € 2,35 p.s.50 voor € 2,25 p.s.100 voor € 2,10 p.s.500 voor € 2 p.s.More information Delivered in 3 to 10 days Sold per piece€ 2,61€ 2,60 Incl. VATAdd to cart
- -1 %6-Pin Female JST SH-Style Cable 30cmPololu #4763 This 30 cm (12″) cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-entry connectors and with side-entry connectors. The other ends of the wires are unterminated; they can be cut to length to match your application. More information Delivered in 3 to 10 days Sold per piece€ 1,56€ 1,55 Incl. VATAdd to cart
- 6-Pin Female JST SH-Style Cable 12cmPololu #4762 This 12 cm (4.5″) cable has six 28 AWG wires and a 6-pin female JST SH-type connector that works with our Micro Metal Gearmotor Encoders with top-entry connectors and with side-entry connectors. The other ends of the wires are unterminated; they can be cut to length to match your application. More information Out of stock Sold per piece€ 1,00 Incl. VATAdd to cart
- Raspberry Pi 4 Starter KitPimoroni #PIM503 A lot of fun squeeezed into a tiny computer! Everything* you need to to get started with the Raspberry Pi 4! Protect your Pi from bumps and bruises in our slick Pibow case, add a Fan SHIM to improve thermal performance, then learn how to code the Blinkt! 10 voor € 102,55 p.s.25 voor € 101,10 p.s.50 voor € 99,70 p.s.100 voor € 98,30 p.s.500 voor € 96,85 p.s.More information Delivered in 5 to 10 days Sold per piece€ 103,95 Incl. VATAdd to cart
- Adafruit NeoTrellis M4 with Enclosure and Buttons Kit PackAdafruit #4020 So you've got a cool/witty name for your band, a Soundcloud account, a 3D-printed Daft Punk helmet... so what could be missing from your road to stardom? The NeoTrellis M4 Kit Pack, of course!The NeoTrellis M4 is an all-in-one USB + NeoPixel + Elastomer + Audio board. 10 voor € 71,65 p.s.25 voor € 69,80 p.s.50 voor € 68 p.s.100 voor € 66,20 p.s.500 voor € 64,40 p.s.More information Delivered in 10 to 30 days Sold per piece€ 73,45 Incl. VATAdd to cart
- USB 16 Channel PWM Servo Motor Driver Controller - STM32 This 16-channel PWM controller can be used to connect up to 16 servo motors! The module has bluetooth support and can be programmed with a micro-USB cable. 10 voor € 12,70 p.s.25 voor € 12,30 p.s.50 voor € 11,95 p.s.100 voor € 11,55 p.s.500 voor € 11,20 p.s.More informationIn stock Sold per piece€ 13,05 Incl. VATAdd to cart
- TC01 Non-contact 16x4 Pixel Infrared Temperature SensorDFRobot #SEN0254 The main function of this TC01 non-contact 16x4 pixel infrared temperature sensor is to realize remote temperature detection via non-contact 16x4 pixel infrared. It can detect the environment temperature, and its 16x4 pixels support producing temperature figure of 64 pixels. 10 voor € 119,15 p.s.25 voor € 117,30 p.s.50 voor € 115,50 p.s.100 voor € 113,70 p.s.500 voor € 111,90 p.s.More informationIn stock Sold per piece€ 120,96€ 120,95 Incl. VATAdd to cart
- 5V Metal Proximity SwitchDFRobot #FIT0658 The proximity switch usually possesses the characteristics of travel switch, micro switch and sensor. This is a small 5V metal proximity switch with 27*10*6mm size, which can be easily mounted in tight space. It features NPN (normally open) output, 4mm detection distance, 1000Hz switching frequency. 10 voor € 11,50 p.s.25 voor € 11,25 p.s.50 voor € 10,95 p.s.100 voor € 10,70 p.s.500 voor € 10,40 p.s.More informationIn stock Sold per piece€ 11,80 Incl. VATAdd to cart
- -22 %P1 Smart Meter reader USB to RJ12 6p6c - FT232RL - 180cm - 3.3V This cable has a built-in FT232RL chip, with which you can read almost all smart meters (with the DSMR-4.0.Interface). 10 voor € 12,50 p.s.25 voor € 12 p.s.50 voor € 11,45 p.s.100 voor € 10,95 p.s.500 voor € 10,40 p.s.More informationIn stock Sold per piece€ 16,79€ 13,05 Incl. VATAdd to cart