Temperature and weather
These modules can, among other things, measure the temperature and humidity of your environment.50 resultsSort by
- Ground humidity sensor module This is a simple humidity sensor, which can be used to measure the humidity in the ground. This makes it possible for the Arduino to give a notification if the plant needs water. This module has both the possibility of digital and analog output. 10 for € 2,35 ea. 25 for € 2,22 ea. 50 for € 2,08 ea. 100 for € 1,95 ea. 500 for € 1,82 ea. More information Out of stock Sold per piece€ 2,50 Incl. VATAdd to cart
- BMP280 Barometer module The BMP280 is the new (improved) version of the BMP180. This chip is able to measure air pressure and temperature even more economically and precisely. The data is easy to read with the built-in I2C and SPI interface. 10 for € 2,69 ea. 25 for € 2,55 ea. 50 for € 2,41 ea. 100 for € 2,26 ea. 500 for € 2,13 ea. More information Out of stock Sold per piece€ 2,85 Incl. VATAdd to cart
- -21 % Adafruit Si7021 Temperature & Humidity Sensor Breakout Board Adafruit #3251 It's summer and you're sweating and your hair's all frizzy and all you really want to know is why the weatherman said this morning that today's relative humidity would max out at a perfectly reasonable 42% when it feels more like 77%. More information Out of stock Sold per piece€ 12,15 € 9,60 Incl. VATAdd to cart
- Adafruit Sensiron SHT31-D Temperature & Humidity Sensor Breakout Adafruit #2857 Sensiron Temperature/Humidity sensors are some of the finest & highest-accuracy devices you can get. And, finally we have some that have a true I2C interface for easy reading. The SHT31-D sensor has an excellent ±2% relative humidity and ±0.3°C accuracy for most uses. More information Delivered in 10 to 30 days Sold per piece€ 13,20 Incl. VATAdd to cart
- MCP9808 High Accuracy I2C Temperature Sensor Breakout Board Adafruit #1782 This I2C digital temperature sensor is one of the more accurate/precise we've ever seen, with a typical accuracy of ±0.25°C over the sensor's -40°C to +125°C range and precision of +0.0625°C. They work great with any microcontroller using standard i2c. More information Delivered in 10 to 30 days Sold per piece€ 4,90 Incl. VATAdd to cart
- Adafruit BMP280 I2C or SPI Barometric Pressure & Altitude Sensor - STEMMA QT Adafruit #2651 osch has stepped up their game with their new BMP280 sensor, an environmental sensor with temperature, barometric pressure that is the next generation upgrade to the BMP085/BMP180/BMP183. This sensor is great for all sorts of weather sensing and can even be used in both I2C and SPI! More information Delivered in 10 to 30 days Sold per piece€ 9,90 Incl. VATAdd to cart
- MPL115A2 - I2C Barometric Pressure/Temperature Sensor Adafruit #992 This pressure sensor from Freescale is a great low-cost sensing solution for measuring barometric pressure. At 1.5 hPa resolution, it's not as precise as our favorite pressure sensor, the BMx280 series, which has up to 0.03 hPa resolution so we don't suggest it as a precision altimeter. More information Delivered in 10 to 30 days Sold per piece€ 7,00 Incl. VATAdd to cart
- LIS3MDL 3-Axis Magnetometer Carrier with Voltage Regulator Pololu #2737 This module is a carrier/breakout board for the ST LIS3MDL three-axis magnetometer. The sensor provides magnetic field strength measurements with a configurable range of ±4 gauss to ±16 gauss that can be read through a digital I²C or SPI interface. 10 for € 17,80 ea. 25 for € 17,33 ea. 50 for € 16,88 ea. 100 for € 16,41 ea. 500 for € 15,95 ea. More information Delivered in 5 to 30 days Sold per piece€ 18,30 Incl. VATAdd to cart
- NTC 10K 1 meter cable This cable with an NTC probe with a length of 1 meter is suitable for the w1209 and w1401 temperature controlled relays. 10 for € 1,90 ea. 25 for € 1,79 ea. 50 for € 1,66 ea. 100 for € 1,55 ea. 500 for € 1,42 ea. More information Out of stock Sold per piece€ 2,05 Incl. VATAdd to cart
- Adafruit BME680 - Temperature, Humidity, Pressure and Gas Sensor Adafruit #3660 The long awaited BME680 from Bosch gives you all the environmental sensing you want in one small package. This little sensor contains temperature, humidity, barometric pressure, and VOC gas sensing capabilities. More information Delivered in 10 to 30 days Sold per piece€ 22,05 Incl. VATAdd to cart
- Anemometer Wind Speed Sensor w/Analog Voltage Output Adafruit #1733 An anemometer is a device used for measuring wind speed, and is a common weather station instrument. This well made anemometer is designed to sit outside and measure wind speed with ease. More information Delivered in 10 to 30 days Sold per piece€ 65,30 Incl. VATAdd to cart
- Adafruit AMG8833 IR Thermal Camera FeatherWing Adafruit #3622 A Feather board without ambition is a Feather board without FeatherWings! This is the Thermal Camera FeatherWing: thanks to the Panasonic AMG8833 8x8 GridEYE sensor, it adds heat-vision to any Feather main board. More information Delivered in 10 to 30 days Sold per piece€ 36,80 Incl. VATAdd to cart
- SparkFun HMC6343 Breakout Sparkfun #SEN-12916 The HMC6343 is a fully integrated high end electronic compass module that can compute and give you a heading direction that’s accurate within a couple degrees. It is tilt compensated and is calibrated to handle magnetic distortions. This breakout board allows for easy use of the HMC6343. 10 for € 154,37 ea. 25 for € 150,68 ea. 50 for € 147,- ea. 100 for € 143,32 ea. 500 for € 139,63 ea. More information Delivered in 5 to 30 days Sold per piece€ 158,05 Incl. VATAdd to cart
- SparkFun Weather Shield Sparkfun #DEV-13956 The SparkFun Weather Shield is an easy-to-use Arduino shield that grants you access to barometric pressure, relative humidity, luminosity and temperature. 10 for € 32,10 ea. 25 for € 31,31 ea. 50 for € 30,51 ea. 100 for € 29,71 ea. 500 for € 28,92 ea. More information Delivered in 5 to 30 days Sold per piece€ 32,90 Incl. VATAdd to cart
- Gravity: Analog Capacitive Soil Moisture Sensor - Corrosion Resistant DFRobot #SEN0193 This product measures soil moisture levels by capacitive sensing, rather than resistive sensing like other types of moisture sensor. It is made of a corrosion resistant material giving it a long service life. Insert it into soil and impress your friends with the real-time soil moisture data! 10 for € 4,04 ea. 25 for € 3,91 ea. 50 for € 3,77 ea. 100 for € 3,64 ea. 500 for € 3,51 ea. More information Delivered in 5 to 30 days Sold per piece€ 4,20 Incl. VATAdd to cart
- SparkFun Grid-EYE Infrared Array Breakout - AMG8833 (Qwiic) Sparkfun #SEN-14607 Get ready to be able to see like the Predator! The SparkFun Grid-EYE Infrared Array Breakout board is an 8x8 thermopile array, meaning you have a square array of 64 pixels capable of independent temperature detection. It’s like having a thermal camera, just in a lower resolution. 10 for € 46,- ea. 25 for € 44,87 ea. 50 for € 43,75 ea. 100 for € 42,62 ea. 500 for € 41,49 ea. More information Delivered in 5 to 30 days Sold per piece€ 47,15 Incl. VATAdd to cart
- Kitronik Prong Soil Moisture Sensor for BBC micro:bit Kitronik #5647 The Prong soil moisture sensor for BBC microbit is a sensor board that can be directly mounted to a BBC micro:bit to monitor the moisture present in the soil. The two conductive tines are placed into the soil. 10 for € 2,84 ea. 25 for € 2,77 ea. 50 for € 2,70 ea. 100 for € 2,64 ea. 500 for € 2,57 ea. More information Delivered in 5 to 30 days Sold per piece€ 2,95 Incl. VATAdd to cart
- Kitronik 'Mini' Prong Soil Moisture Sensor for BBC micro:bit Kitronik #56107 The Mini Prong soil sensor is a short version of the original Prong sensor that has been specially adapted for use with the Kitronik Greenhouse Kit for BBC micro:bit. More information Delivered in 5 to 30 days Sold per piece€ 2,20 Incl. VATAdd to cart
- Adafruit SCD-30 - NDIR CO2 Temperature and Humidity Sensor Adafruit #4867 Take a deep breath in...now slowly breathe out. Mmm isn't it wonderful? All that air around us, which we bring into our lungs, extracts oxygen from, and then breathe out carbon dioxide. More information Delivered in 10 to 30 days Sold per piece€ 49,60 Incl. VATAdd to cart
- SparkFun Environmental Combo Breakout - CCS811/BME280 (Qwiic) Sparkfun #SEN-14348 The SparkFun CCS811/BME280 Environmental Combo Breakout takes care of all your atmospheric-quality sensing needs with the popular CCS811 and BME280 ICs. More information Delivered in 5 to 30 days Sold per piece€ 31,20 Incl. VATAdd to cart
- Gravity: Analog High Temperature Sensor DFRobot #SEN0198 What sensor should you use when you need to measure temperature? Most people will think of a DS18B20 temperature sensor first, but this sensor is only capable of measuring temperatures up to 125C. More information Delivered in 5 to 30 days Sold per piece€ 16,80 Incl. VATAdd to cart
- Universal temperature sensor - DIY Kit Whadda #K8067 Measure indoor and outdoor temperatures, control heating and/or cooling of rooms, equipment… Monitor temperatures in processes, put a temperature readout on your website, check your pool temperature…This product is a replacement of: VM132Specificationsrange: -20° ~ + More information Delivered in 5 to 15 days Sold per piece€ 11,20 Incl. VATAdd to cart
- Kitronik Thermometer Project Kit Kitronik #2110 This kit uses a thermistor to measure the temperature which is then displayed on an LED scale. A PIC micro-controller, pre-programmed with special software, is used to process the output of the thermistor and light the relevant LEDs.The thermometer has two temperature ranges. More information Delivered in 5 to 30 days Sold per piece€ 5,60 Incl. VATAdd to cart
- Kitronik Heat Activated Switch Kitronik #2113 This temperature activated project kit is also available as a light activated project kit. The output of this board can be used to control other electronic circuits, turning them on automatically when it goes hot or cold. More information Delivered in 5 to 30 days Sold per piece€ 2,80 Incl. VATAdd to cart
- Adafruit BMP390L - Precision Barometric Pressure and Altimeter Adafruit #4816 Bosch has been a leader in barometric pressure sensors, from the BMP085. BMP180, BMP280, BMP388... now we've got the next generation, the Adafruit BMP390L (we refer to it as the BMP390) Precision Barometric Pressure and Altimeter Breakout. More information Out of stock Sold per piece€ 10,40 Incl. VATAdd to cart
- Adafruit TMP117 ±0.1°C High Accuracy I2C Temperature Sensor Adafruit #4821 The TMP117 Precision Temperature Sensor is an I2C temperature sensor that will help you easily add temperature measurement and adjustment to your project. More information Delivered in 10 to 30 days Sold per piece€ 11,20 Incl. VATAdd to cart
- Thermocouple Type-K Glass Braid Insulated Adafruit #270 Thermocouples are best used for measuring temperatures that can go above 100 °C. This is a bare wires bead-probe which can measure air or surface temperatures. More information Out of stock Sold per piece€ 9,75 Incl. VATAdd to cart
- Regen sensor module Well-functioning rain sensor. Including opamp (amplifier) circuit so that the sensor can work as a switch. It is also possible to connect the rain sensor directly to the Arduino via the analog input. 10 for € 1,85 ea. 25 for € 1,73 ea. 50 for € 1,61 ea. 100 for € 1,49 ea. 500 for € 1,37 ea. More information In stock Sold per piece€ 2,00 Incl. VATAdd to cart
- DHT11 Humidity and temperature sensor module The module can measure the temperature and humidity of the environment. This has a sampling rate of a maximum of 1 hz, whereby the output is sent digitally. In addition, a borehole (3 mm) has been provided to easily attach the module. 10 for € 2,35 ea. 25 for € 2,22 ea. 50 for € 2,08 ea. 100 for € 1,95 ea. 500 for € 1,81 ea. More information In stock Sold per piece€ 2,50 Incl. VATAdd to cart
- BMP180 Barometer module (GY-68) The BMP180 is the improved version of the BMP085. This chip is able to measure the air pressure and temperature very efficiently and precisely. The data is easy to read with the built-in I2C interface. 10 for € 2,90 ea. 25 for € 2,69 ea. 50 for € 2,47 ea. 100 for € 2,24 ea. 500 for € 2,03 ea. More information In stock Sold per piece€ 3,15 Incl. VATAdd to cart
- Temperature controlled relay 12V - W1209 This temperature-controlled relay that, as the name suggests, contains a relay that is activated at a preset temperature. The supplied probe, which contains an accurate thermistor, measures the current temperature with an interval of 2Hz. 10 for € 2,88 ea. 25 for € 2,79 ea. 50 for € 2,70 ea. 100 for € 2,61 ea. 500 for € 2,51 ea. More information In stock Sold per piece€ 3,00 Incl. VATAdd to cart
- Digital thermometer with display This digital thermometer has a probe of approximately 80 cm. The thermometer also has a measuring range between -50 and + 110 ° C and works on 2 x LR44 (1.5V) batteries. 10 for € 3,31 ea. 25 for € 3,16 ea. 50 for € 3,- ea. 100 for € 2,85 ea. 500 for € 2,70 ea. More information In stock Sold per piece€ 3,50 Incl. VATAdd to cart
- Tansparant frame for the W1209 temperature-controlled relay Tansparant frame for the W1209 temperature controlled relay. 10 for € 1,53 ea. 25 for € 1,45 ea. 50 for € 1,37 ea. 100 for € 1,28 ea. 500 for € 1,19 ea. More information In stock Sold per piece€ 1,65 Incl. VATAdd to cart
- Adafruit PT100 RTD Temperature Sensor Amplifier - MAX31865 Adafruit #3328 Adafruit PT100 RTD Temperature Sensor Amplifier - MAX31865.For precision temperature sensing, nothing beats a Platinum RTD. More information In stock Sold per piece€ 20,05 Incl. VATAdd to cart
- BME280 1.8 - 5V Digital temperature, humidity and air pressure sensor module The BME280 is a 3-in-1 sensor which can measure the temperature, humidity and air pressure and communicates via an SPI or I2C interface. This module contains a level shifter, so that it can be connected to a voltage between 1.8 V and 5 V. 10 for € 11,72 ea. 25 for € 11,38 ea. 50 for € 11,02 ea. 100 for € 10,66 ea. 500 for € 10,31 ea. More information In stock Sold per piece€ 12,10 Incl. VATAdd to cart
- MPL3115A2 - I2C Barometric Pressure/Altitude/Temperature Sensor Adafruit #1893 This pressure sensor from Freescale is a great low-cost sensing solution for precision measurement of barometric pressure and altitude. The MPL3115A2 has a typical 1.5 Pascal resolution, which can resolve altitude at 0.3 meters (compare to the BMP180 which can do 0.17m). More information In stock Sold per piece€ 10,95 Incl. VATAdd to cart
- Adafruit Universal Thermocouple Amplifier MAX31856 Breakout Adafruit #3263 Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference, as well as calculations to handle any non-linearities. For a long time we've suggested our MAX31855K breakout, which works great but is only for K-type thermocouples. More information In stock Sold per piece€ 15,40 Incl. VATAdd to cart
- BME680 Breakout - Air Quality, Temperature, Pressure, Humidity Sensor Pimoroni #PIM357 The state-of-the-art BME680 breakout lets you measure temperature, pressure, humidity, and indoor air quality, and is Raspberry Pi and Arduino-compatible! Use this breakout to monitor every aspect of your indoor environment. 10 for € 17,61 ea. 25 for € 17,16 ea. 50 for € 16,69 ea. 100 for € 16,24 ea. 500 for € 15,79 ea. More information In stock Sold per piece€ 18,10 Incl. VATAdd to cart
- Adafruit BME280 I2C or SPI Temperature Humidity Pressure Sensor Adafruit #2652 Bosch has stepped up their game with their new BME280 sensor, an environmental sensor with temperature, barometric pressure and humidity! This sensor is great for all sorts of weather/environmental sensing and can even be used in both I2C and SPI! More information In stock Sold per piece€ 14,50 Incl. VATAdd to cart
- Thermocouple Amplifier MAX31855 breakout board (MAX6675 upgrade) Adafruit #269 Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. The MAX31855K does everything for you, and can be easily interfaced with any microcontroller, even one without an analog input. More information In stock Sold per piece€ 13,95 Incl. VATAdd to cart
- Air quality, CO2, temperature and humidity sensor - CCS811 HDC1080 This module combines 2 powerful chips to measure the air quality, humidity and temperature in an environment. This makes the module a compact solution for projects where the quality of the air in a room must be monitored. The module works with 3.3V and communicates via I2C. 10 for € 14,35 ea. 25 for € 13,93 ea. 50 for € 13,51 ea. 100 for € 13,09 ea. 500 for € 12,68 ea. More information In stock Sold per piece€ 14,80 Incl. VATAdd to cart
- Gravity BMP388 Barometric Pressure Sensors DFRobot #SEN0251 This new released BMP388 barometric pressure sensor by DFRobot is equipped with the functionality of temperature and pressure measurement. It supports Arduino code control. 10 for € 7,31 ea. 25 for € 7,09 ea. 50 for € 6,88 ea. 100 for € 6,67 ea. 500 for € 6,46 ea. More information In stock Sold per piece€ 7,55 Incl. VATAdd to cart
- Gravity: Non-contact Digital Water / Liquid Level Sensor For Arduino DFRobot #SEN0204 This is a non-contact water / liquid level sensor for Arduino. It utilizes advanced signal processing technology by using a powerful chip (XKC-Y25-T12V) with high-speed operation capacity to achieve non-contact liquid level detection. 10 for € 9,13 ea. 25 for € 8,88 ea. 50 for € 8,63 ea. 100 for € 8,37 ea. 500 for € 8,12 ea. More information In stock Sold per piece€ 9,40 Incl. VATAdd to cart
- SparkFun Qwiic Thermocouple Amplifier - MCP9600 (Screw Terminals) Sparkfun #SEN-16295 SparkFun Qwiic Thermocouple Amplifier - MCP9600 (Screw Terminals).The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system. 10 for € 17,- ea. 25 for € 16,56 ea. 50 for € 16,12 ea. 100 for € 15,68 ea. 500 for € 15,25 ea. More information In stock Sold per piece€ 17,45 Incl. VATAdd to cart
- Digital thermometer / hygrometer - built-in Velleman #PMHYGRO This built-in panel sensor measures both temperature and humidity with an accuracy of ± 1 ° C and ± 5%. 10 for € 9,49 ea. 25 for € 9,24 ea. 50 for € 8,97 ea. 100 for € 8,71 ea. 500 for € 8,45 ea. More information In stock Sold per piece€ 9,80 Incl. VATAdd to cart
- -17 % Enviro+ FeatherWing Pimoroni #PIM502 Care about air with Enviro+ FeatherWing. It's packed full of environmental sensors that'll get you started in the world of citizen science. Monitor weather, light level, noise pollution, and air quality, in your local area and contribute your data to better understand trends in air pollution. 10 for € 33,14 ea. 25 for € 32,34 ea. 50 for € 31,52 ea. 100 for € 30,70 ea. 500 for € 29,89 ea. More information In stock Sold per piece€ 41,15 € 34,00 Incl. VATAdd to cart
- Adafruit PMSA003I Air Quality Breakout Adafruit #4632 Breathe easy, knowing that you can track and sense the quality of the air around you with this Adafruit PMSA003I Air Quality Breakout. This sensor is great for monitoring air quality, in a compact plug-in format. More information In stock Sold per piece€ 45,75 Incl. VATAdd to cart
- SparkFun Qwiic MicroPressure Sensor Sparkfun #SEN-16476 The SparkFun Qwiic MicroPressure Sensor is a miniature breakout equipped with Honeywell's 25psi piezoresistive silicon pressure sensor. 10 for € 13,89 ea. 25 for € 13,52 ea. 50 for € 13,15 ea. 100 for € 12,78 ea. 500 for € 12,41 ea. More information In stock Sold per piece€ 14,25 Incl. VATAdd to cart
- Thermostat module 5 - 30°c ( 41 - 86°f) Whadda #WMHA137 Simple low-cost thermostat / temperature controller for various applications. Thermostat module 5 - 30°c ( 41 - 86°f). 10 for € 11,06 ea. 25 for € 10,76 ea. 50 for € 10,46 ea. 100 for € 10,16 ea. 500 for € 9,86 ea. More information In stock Sold per piece€ 11,40 Incl. VATAdd to cart
- Thermocouple Amplifier with 1-Wire Breakout Board - MAX31850K Adafruit #1727 Thermocouples are very sensitive, requiring a good amplifier with a cold-compensation reference. So far we've carried the very nice MAX31855 which is an SPI interface thermocouple amplifier. The '855 is great but if you have a lot of thermocouples to measure it isn't terribly easy to use. More information In stock Sold per piece€ 14,65 Incl. VATAdd to cart
