Other
Of course we also have all kinds of other modules such as microphone breakouts, GPS modules, water pressure sensors and weighing sensors.36 resultsSort by
- Magnetic switch module This module measures magnetic fields and gives a signal at an adjustable switching point. The magnetic switch works at 3.3V and 5V, whereby the sensitivity can be adjusted with the potentiometer. 10 for € 2,42 ea. 25 for € 2,29 ea. 50 for € 2,15 ea. 100 for € 2,01 ea. 500 for € 1,88 ea. More information In stock Sold per piece€ 2,55 Incl. VATAdd to cart
- Sound detection sensor module This module acts as a switch with sound as input. When a sound is detected above the set sensitivity, this module briefly signals. This module can be used as a blow sensor or a trigger when too much noise is made. 10 for € 2,04 ea. 25 for € 1,92 ea. 50 for € 1,79 ea. 100 for € 1,66 ea. 500 for € 1,53 ea. More information In stock Sold per piece€ 2,20 Incl. VATAdd to cart
- Electret Microphone Amplifier - MAX4466 with Adjustable Gain Adafruit #1063 Add an ear to your project with this well-designed electret microphone amplifier. This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on. More information In stock Sold per piece€ 6,85 Incl. VATAdd to cart
- SparkFun Load Cell Amplifier - HX711 Sparkfun #SEN-13879 The SparkFun Load Cell Amplifier is a small breakout board for the HX711 IC that allows you to easily read load cells to measure weight. 10 for € 9,15 ea. 25 for € 8,89 ea. 50 for € 8,64 ea. 100 for € 8,38 ea. 500 for € 8,13 ea. More information In stock Sold per piece€ 9,40 Incl. VATAdd to cart
- -17 % SparkFun Load Sensor Combinator Sparkfun #BOB-13878 The SparkFun Load Sensor Combinator is a bare PCB that combines four load sensors into a standard four-wire Wheatstone bridge configuration. If you open up an electronic bathroom scale, you’ll find a large rat's nest of wires. 10 for € 0,22 ea. 25 for € 0,21 ea. 50 for € 0,20 ea. 100 for € 0,19 ea. 500 for € 0,18 ea. More information In stock Sold per piece€ 0,30 € 0,25 Incl. VATAdd to cart
- Gravity: Analog Turbidity Sensor For Arduino DFRobot #SEN0189 The arduino turbidity sensor detects water quality by measuring level of turbidity. It is able to detect suspended particles in water by measuring the light transmittance and scattering rate which changes with the amount of total suspended solids (TSS) in water. 10 for € 9,13 ea. 25 for € 8,81 ea. 50 for € 8,50 ea. 100 for € 8,18 ea. 500 for € 7,86 ea. More information In stock Sold per piece€ 9,45 Incl. VATAdd to cart
- Gravity: Analog pH Sensor/Meter Kit V2 DFRobot #SEN0161-V2 DFRobot Gravity: Analog pH meter V2 is specifically designed to measure the pH of the solution and reflect the acidity or alkalinity. It is commonly used in various applications such as aquaponics, aquaculture, and environmental water testing. 10 for € 37,01 ea. 25 for € 36,10 ea. 50 for € 35,18 ea. 100 for € 34,27 ea. 500 for € 33,36 ea. More information In stock Sold per piece€ 37,95 Incl. VATAdd to cart
- Gravity: Analog Electrical Conductivity Sensor /Meter V2 (K=1) DFRobot #DFR0300 DFRobot Gravity: analog electrical conductivity meter V2 is specially used to measure the electrical conductivity of aqueous solution, and then to evaluate the water quality, which is often used in water culture, aquaculture, environmental water detection and other fields. 10 for € 65,13 ea. 25 for € 63,55 ea. 50 for € 61,98 ea. 100 for € 60,39 ea. 500 for € 58,82 ea. More information In stock Sold per piece€ 66,70 Incl. VATAdd to cart
- KY-037 Microphone sound detection module The KY-037 Microphone sound detection module detects loud sounds like slamming doors. The module has an analog and digital output so the sensor can be ready by any microcontroller. 10 for € 1,71 ea. 25 for € 1,58 ea. 50 for € 1,47 ea. 100 for € 1,35 ea. 500 for € 1,24 ea. More information In stock Sold per piece€ 1,85 Incl. VATAdd to cart
- Gravity: Analog pH Sensor / Meter Kit For Arduino DFRobot #SEN0161 Need to measure water quality and other parameters but haven't got any low-cost pH meter? Find it difficult to use with Arduino? DFRobot analog pH meter, specially designed for Arduino controllers and has a convenient and practical "Gravity" connector and a bunch of features. 10 for € 25,72 ea. 25 for € 25,08 ea. 50 for € 24,43 ea. 100 for € 23,78 ea. 500 for € 23,14 ea. More information In stock Sold per piece€ 26,40 Incl. VATAdd to cart
- HX711 weeg sensor module dual channel The module uses the hx711 as a controller, a 24-bit S / D converter chip that has been specially designed for digital scales. One or two weight sensors belong to this module, which transmit a variable resistance depending on the weight. 10 for € 1,49 ea. 25 for € 1,44 ea. 50 for € 1,37 ea. 100 for € 1,31 ea. 500 for € 1,25 ea. More information Out of stock Sold per piece€ 1,55 Incl. VATAdd to cart
- Adafruit I2S MEMS Microphone Breakout - SPH0645LM4H Adafruit #3421 Listen to this good news - we now have a breakout board for a super tiny I2S MEMS microphone. Just like 'classic' electret microphones, MEMS mics can detect sound and convert it to voltage, but they're way smaller and thinner. This microphone doesn't even have analog out, its purely digital. More information Delivered in 10 to 30 days Sold per piece€ 7,80 Incl. VATAdd to cart
- Adafruit Ultimate GPS Logger Shield - Includes GPS Module Adafruit #1272 Brand new and better than ever, we've replaced our Adafruit GPS shield kit with this assembled shield that comes with an Ultimate GPS module. This GPS shield works great with either UNO or Leonardo Arduinos and is designed to log data to an SD card. More information Delivered in 10 to 30 days Sold per piece€ 44,00 Incl. VATAdd to cart
- Adafruit Ultimate GPS HAT for Raspberry Pi A+/B+/Pi 2/Pi 3 Adafruit #2324 It's 10PM, do you know where your Raspberry Pi is? If you had this GPS HAT, you would! More information Delivered in 10 to 30 days Sold per piece€ 38,15 Incl. VATAdd to cart
- MLX90640 Thermal Camera Breakout - Standard (55°) Pimoroni #PIM365 MLX90640 Thermal Camera Breakout - Standard (55°)A sophisticated, hackable, 32x24 pixel thermal camera breakout! Use it to monitor the temperature of your CPU or coffee pot, or to build your own heat-seeking night vision camera. Works with Raspberry Pi or Arduino. 10 for € 49,57 ea. 25 for € 49,03 ea. 50 for € 48,47 ea. 100 for € 47,93 ea. 500 for € 47,37 ea. More information Delivered in 5 to 30 days Sold per piece€ 50,15 Incl. VATAdd to cart
- SparkFun Sound Detector (with Headers) Sparkfun #SEN-14262 The SparkFun Sound Detector is a small and very easy-to-use audio sensing board with three different outputs. The Sound Detector not only provides an audio output, but also a binary indication of the presence of sound and an analog representation of its amplitude. 10 for € 11,97 ea. 25 for € 11,64 ea. 50 for € 11,33 ea. 100 for € 11,01 ea. 500 for € 10,68 ea. More information Delivered in 5 to 30 days Sold per piece€ 12,30 Incl. VATAdd to cart
- MLX90640 Thermal Camera Breakout - Wide angle (110°) Pimoroni #PIM366 A sophisticated, hackable, 32x24 pixel thermal camera breakout! Use it to monitor the temperature of your CPU or coffee pot, or to build your own heat-seeking night vision camera. Works with Raspberry Pi or Arduino. 10 for € 53,31 ea. 25 for € 51,81 ea. 50 for € 50,31 ea. 100 for € 48,81 ea. 500 for € 47,32 ea. More information Delivery time ±30 working day(s) Sold per piece€ 54,80 Incl. VATAdd to cart
- -18 % Adafruit PDM MEMS Microphone Breakout Adafruit #3492 An exotic new microphone has arrived in the Adafruit shop, a PDM MEMS Microphone! PDM is the 'third' kind of microphone you can integrate with electronics, apart from analog or I2S. These microphones are very commonly used in products, but are rarely seen in maker projects. More information Delivered in 10 to 30 days Sold per piece€ 7,90 € 6,50 Incl. VATAdd to cart
- SparkFun OpenScale Sparkfun #SEN-13261 The SparkFun OpenScale is a simple-to-use, open source solution for measuring weight and temperature. It has the ability to read multiple types of load cells and offers a simple-to-use serial menu to configure calibration value, sample rate, time stamp and units of precision. 10 for € 28,21 ea. 25 for € 27,50 ea. 50 for € 26,80 ea. 100 for € 26,10 ea. 500 for € 25,39 ea. More information Delivered in 5 to 30 days Sold per piece€ 28,95 Incl. VATAdd to cart
- Gravity: Analog pH Sensor / Meter Pro Kit For Arduino DFRobot #SEN0169 This is a professional Arduino pH Sensor Meter Kit with industrial electrode. It has built-in simple, convenient , practical connection and long life (up to 1 year), which makes it very suitable for long term online monitoring. 10 for € 59,91 ea. 25 for € 58,45 ea. 50 for € 57,- ea. 100 for € 55,56 ea. 500 for € 54,10 ea. More information Delivered in 5 to 30 days Sold per piece€ 61,40 Incl. VATAdd to cart
- Gravity: Analog ORP Sensor Meter For Arduino DFRobot #SEN0165 In the ever-increasing need and awareness for health and safety, water has become a focus point for proper disinfection treatment as aftereffects of industrialization can become a danger for contamination of water via direct contact. 10 for € 84,23 ea. 25 for € 82,20 ea. 50 for € 80,17 ea. 100 for € 78,14 ea. 500 for € 76,12 ea. More information Delivered in 5 to 30 days Sold per piece€ 86,30 Incl. VATAdd to cart
- Gravity: Analog Water Pressure Sensor DFRobot #SEN0257 Introduction This is a water pressure sensor adopts DFRobot Gravity 3-pin interface. It supports standard 5V voltage input and 0.5~4.5V linear voltage output. It is compatible with multiple Arduino controllers. 10 for € 16,91 ea. 25 for € 16,46 ea. 50 for € 16,03 ea. 100 for € 15,59 ea. 500 for € 15,16 ea. More information Delivered in 5 to 30 days Sold per piece€ 17,35 Incl. VATAdd to cart
- Gravity: Analog pH Sensor / Meter Pro Kit V2 DFRobot #SEN0169-V2 Introduction DFRobot Gravity: Analog pH meter pro V2 is specifically designed to measure the pH of the solution and reflect the acidity or alkalinity. It is commonly used in various applications such as aquaponics, aquaculture, and environmental water testing. 10 for € 57,73 ea. 25 for € 56,33 ea. 50 for € 54,93 ea. 100 for € 53,53 ea. 500 for € 52,13 ea. More information Delivered in 5 to 30 days Sold per piece€ 59,15 Incl. VATAdd to cart
- SparkFun GPS-RTK Dead Reckoning pHAT for Raspberry Pi Sparkfun #GPS-16475 The SparkFun ZED-F9R GPS pHAT is a high precision, sensor fusion GPS board with equally impressive configuration options and takes advantage of u-blox's Automotive Dead Reckoning (ADR) technology. More information Delivered in 5 to 30 days Sold per piece€ 228,70 Incl. VATAdd to cart
- SparkFun GPS-RTK-SMA Breakout - ZED-F9P (Qwiic) Sparkfun #GPS-16481 SparkFun GPS-RTK-SMA Breakout - ZED-F9P (Qwiic).With GPS you are able to know where you are, where you're going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! More information Delivered in 5 to 30 days Sold per piece€ 196,00 Incl. VATAdd to cart
- SparkFun GPS-RTK2 Board - ZED-F9P (Qwiic) Sparkfun #GPS-15136 SparkFun GPS-RTK2 Board - ZED-F9P (Qwiic).With GPS you are able to know where you are, where you're going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! More information Delivered in 5 to 30 days Sold per piece€ 196,00 Incl. VATAdd to cart
- SparkFun GPS Breakout - NEO-M9N, U.FL (Qwiic) Sparkfun #GPS-15712 The SparkFun NEO-M9N GPS Breakout is a high quality, GPS board with equally impressive configuration options. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver, meaning it can receive signals from the GPS, GLONASS, Galileo, and BeiDou constellations with ~1.5 meter accuracy. More information Out of stock Sold per piece€ 49,00 Incl. VATAdd to cart
- SparkFun GPS-RTK Dead Reckoning Breakout - ZED-F9R (Qwiic) Sparkfun #GPS-16344 The SparkFun ZED-F9R GPS Breakout is a high precision, sensor fusion GPS board with equally impressive configuration options and takes advantage of u-blox's Automotive Dead Reckoning (ADR) technology. More information Delivered in 5 to 30 days Sold per piece€ 253,20 Incl. VATAdd to cart
- SparkFun GPS Breakout - Chip Antenna, SAM-M8Q (Qwiic) Sparkfun #GPS-15210 The SparkFun SAM-M8Q GPS Breakout is a high quality, GPS board with equally impressive configuration options. The SAM-M8Q is a 72-channel GNSS receiver, meaning it can receive signals from the GPS, GLONASS, and Galileo constellations. More information Delivered in 5 to 30 days Sold per piece€ 29,40 Incl. VATAdd to cart
- SparkFun GPS-RTK Board - NEO-M8P-2 (Qwiic) Sparkfun #GPS-15005 SparkFun GPS-RTK Board - NEO-M8P-2 (Qwiic).With GPS you are able to know where you are, where you're going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! More information Delivered in 5 to 30 days Sold per piece€ 179,70 Incl. VATAdd to cart
- SparkFun GPS Dead Reckoning Breakout - NEO-M8U (Qwiic) Sparkfun #GPS-16329 The SparkFun NEO-M8U GPS Breakout is a high quality, GPS board with equally impressive configuration options. The NEO-M8U takes advantage of u-blox's Untethered Dead Reckoning (UDR) technology. More information Out of stock Sold per piece€ 48,20 Incl. VATAdd to cart
- SparkFun GPS Breakout - NEO-M9N, SMA (Qwiic) Sparkfun #GPS-17285 The SparkFun NEO-M9N GPS Breakout is a high quality GPS board with equally impressive configuration options including SMA. More information Delivered in 5 to 30 days Sold per piece€ 50,65 Incl. VATAdd to cart
- SparkFun GPS Breakout - XA1110 (Qwiic) Sparkfun #GPS-14414 The SparkFun XA1110 GPS Breakout is a small I2C-supported module built for easy hookup, thanks to our Qwiic Connect System. More information Delivered in 5 to 30 days Sold per piece€ 42,50 Incl. VATAdd to cart
- SparkFun GPS Breakout - NEO-M9N, Chip Antenna (Qwiic) Sparkfun #GPS-15733 The SparkFun NEO-M9N GPS Breakout with on-board chip antenna is a high quality, GPS board with equally impressive configuration options. More information Delivered in 5 to 30 days Sold per piece€ 49,00 Incl. VATAdd to cart
- SparkFun GPS Breakout - ZOE-M8Q (Qwiic) Sparkfun #GPS-15193 The SparkFun ZOE-M8Q GPS Breakout is a high accuracy, miniaturized, GPS board that is perfect for applications that don't possess a lot of space. The on-board ZOE-M8Q is a 72-channel GNSS receiver, meaning it can receive signals from the GPS, GLONASS, BeiDou, and Galileo constellations. More information Delivered in 5 to 30 days Sold per piece€ 36,75 Incl. VATAdd to cart
- Fermion: MEMS Microphone Module DFRobot #SEN0487 Introduction This tiny MEMS microphone has an amplifier gain of 66. When there is no sound detected, it outputs voltage around 0.66*VCC. When speaking, you can easily get the acoustic waveform by ADC sampling. The module can be used on all kinds of 3.3V/5V main-controllers. 10 for € 2,98 ea. 25 for € 2,86 ea. 50 for € 2,75 ea. 100 for € 2,62 ea. 500 for € 2,51 ea. More information Out of stock Sold per piece€ 3,10 Incl. VATAdd to cart
