Motor controllers
To control DC motors, stepper motors, and servo motors, special electronics are required to provide the correct signals to the motor. Grove Gravity Qwiic Motor controllers Shows ESP8266 Sensor modules Entry Programmers Communication Output modules Wearables
141 resultsSort by
- ULN2003 stepper motor driver module This module provides a direct interface between a stepper motor and a microcontroller. Ideal for Arduino and other development systems. 10 for € 2,49 ea. 25 for € 2,34 ea. 50 for € 2,19 ea. 100 for € 2,04 ea. 500 for € 1,88 ea. More information In stock Sold per piece€ 2,65 Incl. VATAdd to cart
- L298N motor driver module H-Bridge The module, with the L298N as controller, is a double H-bridge motor driver with little heat production and interference. The module can even handle a peak voltage of 46v and a peak current of 3A. This module can control up to 2A with a power of 25w. 10 for € 3,81 ea. 25 for € 3,59 ea. 50 for € 3,38 ea. 100 for € 3,16 ea. 500 for € 2,95 ea. More information In stock Sold per piece€ 4,05 Incl. VATAdd to cart
- L293D motor driver module This module, with the main ic the L293D, which is a very strong, 4-channel driver. This board can control four channels with 0.6 A (1.2 A peak) with heat protection. Can supply a voltage from 4.5V to 25V DC (external power supply possible). 10 for € 3,28 ea. 25 for € 3,11 ea. 50 for € 2,94 ea. 100 for € 2,78 ea. 500 for € 2,60 ea. More information In stock Sold per piece€ 3,45 Incl. VATAdd to cart
- A3967 EasyDriver Stepper motor driver module V44 This is an easy-to-use stepper motor driver, which is controlled with 3.3V or 5V. The EasyDriver requires a voltage of 7V to 30V for controlling the motor. The EasyDriver can control bi-polar motors, and 4, 6, or 8-phase stepper motors. 10 for € 4,37 ea. 25 for € 4,17 ea. 50 for € 3,98 ea. 100 for € 3,79 ea. 500 for € 3,59 ea. More information In stock Sold per piece€ 4,60 Incl. VATAdd to cart
- CNC Shield v3 The CNC Shield v3 is made for the control of 3D printers, milling and engraving machines. This shield fits the Arduino UNO. This board has 4 sockets for the installation of a stepper motor driver, such as the A4988. Only 2 channels per motor are required to control this motor. 10 for € 4,53 ea. 25 for € 4,32 ea. 50 for € 4,10 ea. 100 for € 3,88 ea. 500 for € 3,67 ea. More information In stock Sold per piece€ 4,75 Incl. VATAdd to cart
- PCA9685 16 Channel PWM / Servo module I2C This module, driven by the PCA9685, has 16 PWM outputs of 12-bit. This makes it possible to control 16 PWM outputs with only 2 data lines. By connecting these modules to each other, 62 modules can be connected to each other without extra data lines. 10 for € 6,70 ea. 25 for € 6,45 ea. 50 for € 6,20 ea. 100 for € 5,94 ea. 500 for € 5,68 ea. More information In stock Sold per piece€ 7,00 Incl. VATAdd to cart
- DRV8825 stepper motor driver module with soldered bases + heat sink The DRV8825 is a complete microstep motor driver with integrated encoder. This module can operate in 1, 1/2, 1/4, 1/8, 1/16 and 1/32 step mode to control a bipolar stepper motor up to a power of 35V and ± 2.5A. 10 for € 3,94 ea. 25 for € 3,85 ea. 50 for € 3,76 ea. 100 for € 3,67 ea. 500 for € 3,58 ea. More information In stock Sold per piece€ 4,05 Incl. VATAdd to cart
- CNC Shield v4 Arduino Nano The CNC Shield v4 is made for the control of 3D printers, milling and engraving machines. This version of the shield has 1 motor driver less than its predecessor, but is more compact and has room for an Arduino Nano. This board has 3 sockets for the installation of a stepper motor driver. 10 for € 4,60 ea. 25 for € 4,41 ea. 50 for € 4,22 ea. 100 for € 4,02 ea. 500 for € 3,83 ea. More information In stock Sold per piece€ 4,80 Incl. VATAdd to cart
- Micro Maestro 6-Channel USB Servo Controller (Assembled) Pololu #1350 The six-channel Micro Maestro raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control. Whether you want high-performance servo control (0.25μs resolution with built-in speed and acceleration control) or a general I/O... 10 for € 21,07 ea. 25 for € 20,41 ea. 50 for € 19,77 ea. 100 for € 19,11 ea. 500 for € 18,45 ea. More information In stock Sold per piece€ 21,75 Incl. VATAdd to cart
- DRV8838 Single Brushed DC Motor Driver Carrier Pololu #2990 Texas Instruments’ DRV8838 is a tiny H-bridge motor driver IC that can be used for bidirectional control of one brushed DC motor at 0 V to 11 V. It can supply up to about 1.7 A continuously and can tolerate peak currents up to 1.8 A for short durations, making it an ideal driver for small... 10 for € 8,63 ea. 25 for € 8,21 ea. 50 for € 7,81 ea. 100 for € 7,39 ea. 500 for € 6,99 ea. More information In stock Sold per piece€ 9,05 Incl. VATAdd to cart
- -17 % DRV8833 Dual Motor Driver Carrier Pololu #2130 This tiny breakout board for TI’s DRV8833 dual motor driver can deliver 1.2 A per channel continuously (2 A peak) to a pair of DC motors. With an operating voltage range from 2.7 V to 10.8 V and built-in protection against reverse-voltage, under-voltage, over-current, and over-temperature... 10 for € 6,53 ea. 25 for € 6,50 ea. 50 for € 6,46 ea. 100 for € 6,43 ea. 500 for € 6,39 ea. More information In stock Sold per piece€ 7,95 € 6,60 Incl. VATAdd to cart
- A4988 Stepper Motor Driver Carrier Pololu #1182 This breakout board for Allegro’s A4988 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and over-temperature protection, and five different microstep resolutions (down to 1/16-step). It operates from 8 V to 35 V and can deliver up to... 10 for € 9,02 ea. 25 for € 8,90 ea. 50 for € 8,78 ea. 100 for € 8,65 ea. 500 for € 8,53 ea. More information In stock Sold per piece€ 9,15 Incl. VATAdd to cart
- 15A 400W MOSFET PWM Module This 15A 400W MOSFET PWM module contains 2 MOSFETS to switch larger currents with a small current. The MOSFETS can be controlled with a voltage of 3.3V to 20V and have an output of 5V to 36V with a power of 400W. 10 for € 2,52 ea. 25 for € 2,37 ea. 50 for € 2,22 ea. 100 for € 2,07 ea. 500 for € 1,92 ea. More information In stock Sold per piece€ 2,70 Incl. VATAdd to cart
- Adafruit DRV8871 DC Motor Driver Breakout Board - 3.6A Max Adafruit #3190 Crank up your robotics with powerful Adafruit DRV8871 motor driver breakout board. This motor driver has a lot of great specs that make it useful for a wide variety of mechatronics. More information In stock Sold per piece€ 9,65 Incl. VATAdd to cart
- Adafruit DRV8833 DC/Stepper Motor Driver Breakout Board Adafruit #3297 Spin two DC motors or step one bi-polar or uni-polar stepper with up to 1.2A per channel using the DRV8833. This motor driver chip is a nice alternative to the TB6612 driver. More information In stock Sold per piece€ 6,75 Incl. VATAdd to cart
- BTS7960 Double Motor Driver 43A This motor driver contains 2 BTS7960B H-bridges, with which 2 DC motors or solenoids can be controlled. The BTS7960B has a built-in thermal and over-current protection and can also control up to 43A! The motor driver can be controlled with a PWM signal up to 25kHz. 10 for € 11,42 ea. 25 for € 11,04 ea. 50 for € 10,68 ea. 100 for € 10,31 ea. 500 for € 9,95 ea. More information In stock Sold per piece€ 11,80 Incl. VATAdd to cart
- TB67S279FTG Stepper Motor Driver Compact Carrier Pololu #3098 This breakout board for Toshiba’s TB67S279FTG microstepping bipoloar stepper motor driver is arranged in the popular 16-pin Pololu form factor, making it a more compact alternative to our full breakout. It features adjustable current limiting and seven microstep resolutions (down to 1/32-step). 10 for € 8,56 ea. 25 for € 8,32 ea. 50 for € 8,07 ea. 100 for € 7,82 ea. 500 for € 7,57 ea. More information In stock Sold per piece€ 8,85 Incl. VATAdd to cart
- TB67S249FTG Stepper Motor Driver Compact Carrier (Header Pins Soldered) Pololu #3097 This version of our TB67S249FTG Stepper Motor Driver Compact Carrier ships with male header pins installed, so no soldering is required to use it with an appropriate 16-pin socket or solderless breadboard. 10 for € 11,53 ea. 25 for € 11,27 ea. 50 for € 10,99 ea. 100 for € 10,73 ea. 500 for € 10,47 ea. More information In stock Sold per piece€ 11,80 Incl. VATAdd to cart
- STSPIN220 Low-Voltage Stepper Motor Driver Carrier Pololu #2876 This breakout board for STMicro’s STSPIN220 low-voltage microstepping bipolar stepper motor driver offers microstepping down to 1/256-step and operates from 1.8 V to 10 V, allowing stepper motors to be powered with voltages that are too low for other drivers. 10 for € 7,20 ea. 25 for € 6,78 ea. 50 for € 6,35 ea. 100 for € 5,92 ea. 500 for € 5,51 ea. More information In stock Sold per piece€ 7,65 Incl. VATAdd to cart
- TB67S249FTG Stepper Motor Driver Carrier - Full Breakout Pololu #2973 This breakout board makes it easy to use Toshiba’s TB67S249FTG microstepping bipolar stepper motor driver, which features adjustable current limiting and seven microstep resolutions (down to 1/32-step). 10 for € 10,55 ea. 25 for € 10,41 ea. 50 for € 10,25 ea. 100 for € 10,09 ea. 500 for € 9,95 ea. More information In stock Sold per piece€ 10,75 Incl. VATAdd to cart
- SparkFun Servo Trigger Sparkfun #WIG-13118 The SparkFun Servo Trigger is a small robotics board that simplifies the control of hobby RC servo motors. When an external switch or logic signal changes state, the Servo Trigger is able to tell an attached servo motor to move from position A to position B. 10 for € 22,57 ea. 25 for € 21,99 ea. 50 for € 21,41 ea. 100 for € 20,83 ea. 500 for € 20,24 ea. More information In stock Sold per piece€ 23,15 Incl. VATAdd to cart
- Adafruit 16-Channel 12-bit PWM/Servo Driver - I2C interface Adafruit #815 You want to make a cool robot, maybe a hexapod walker, or maybe just a piece of art with a lot of moving parts. Or maybe you want to drive a lot of LEDs with precise PWM output. Then you realize that your microcontroller has a limited number of PWM outputs! What now? More information In stock Sold per piece€ 18,50 Incl. VATAdd to cart
- 20Amp 6V-30V DC Motor Driver Cytron #MD20A The MD20A enables bidirectional control of one high-power brushed DC motor from 6V to 30V. With discrete NMOS H-Bridge design, this motor driver is able to support 20Amp continuously without any heatsink. 10 for € 20,46 ea. 25 for € 19,92 ea. 50 for € 19,40 ea. 100 for € 18,86 ea. 500 for € 18,34 ea. More information In stock Sold per piece€ 21,00 Incl. VATAdd to cart
- 3Amp 4V-16V DC Motor Driver (2 Channels) Cytron #MDD3A Looking for a motor driver for your mobile robot? Want to drive a stepper motor? Worry not! MDD3A is able to control two brushed DC motors or single bipolar/unipolar stepper motor from 4V to 16V. 10 for € 8,05 ea. 25 for € 7,98 ea. 50 for € 7,89 ea. 100 for € 7,80 ea. 500 for € 7,71 ea. More information In stock Sold per piece€ 8,15 Incl. VATAdd to cart
- 10Amp 5V-30V DC Motor Driver (2 Channels) Cytron #MDD10A The MDD10A is the dual-channel version of MD10C which is designed to drive 2 brushed DC motors with high current up to 10A continuously. Like MD10C, MDD10A also supports locked-antiphase and sign-magnitude PWM signal. 10 for € 26,77 ea. 25 for € 25,76 ea. 50 for € 24,74 ea. 100 for € 23,73 ea. 500 for € 22,72 ea. More information In stock Sold per piece€ 27,80 Incl. VATAdd to cart
- 10 Amp 7V-30V Potentiometer & Switch Control DC Motor Driver Cytron #MD10-POT MD10-POT is a motor driver or speed controller that enables you to easily control a motor's run/brake, direction and speed. No microcontroller is needed in a complete setup, hence programming is not required too. 10 for € 12,67 ea. 25 for € 12,27 ea. 50 for € 11,87 ea. 100 for € 11,46 ea. 500 for € 11,06 ea. More information In stock Sold per piece€ 13,10 Incl. VATAdd to cart
- DRV8825 Stepper Motor Driver Carrier, High Current Pololu #2133 This breakout board for TI’s DRV8825 microstepping bipolar stepper motor driver features adjustable current limiting, over-current and over-temperature protection, and six microstep resolutions (down to 1/32-step). 10 for € 10,89 ea. 25 for € 10,41 ea. 50 for € 9,93 ea. 100 for € 9,45 ea. 500 for € 8,97 ea. More information In stock Sold per piece€ 11,40 Incl. VATAdd to cart
- TB6612FNG Dual Motor Driver Carrier Pololu #713 This tiny board is an easy way to use Toshiba’s TB6612FNG dual motor driver, which can independently control two bidirectional DC motors or one bipolar stepper motor. 10 for € 15,42 ea. 25 for € 14,62 ea. 50 for € 13,81 ea. 100 for € 13,02 ea. 500 for € 12,22 ea. More information In stock Sold per piece€ 16,25 Incl. VATAdd to cart
- 30Amp 5V-30V DC Motor Driver Cytron #MD30C Note: MD30C is Revision 2.0 since January 2016. We know DC brushed motor is widely used for many different applications; from conveyor, AGV (Automated Guide Vehicle), mobile robot and combat robot. 10 for € 34,55 ea. 25 for € 34,05 ea. 50 for € 33,55 ea. 100 for € 33,05 ea. 500 for € 32,55 ea. More information In stock Sold per piece€ 35,05 Incl. VATAdd to cart
- 10Amp 7V-30V DC Motor Driver for R/C (2 Channels) Cytron #MDDRC10 Building a RC vehicle or mobile robot without any microcontroller? MDDRC10 is what you need. It's plug and play and can be connected directly to the RC receiver. No coding or programming is needed. 10 for € 37,79 ea. 25 for € 36,85 ea. 50 for € 35,91 ea. 100 for € 34,98 ea. 500 for € 34,03 ea. More information In stock Sold per piece€ 38,75 Incl. VATAdd to cart
- 20Amp 6V-30V DC Motor Driver (2 Channels) Cytron #MDD20A The MDD20A enables bidirectional control of two high-power brushed DC motors from 6V to 30V. With full discrete NMOS H-Bridge design, this motor driver is able to support 20Amp continuously for each motor without any heatsink. 10 for € 36,53 ea. 25 for € 35,67 ea. 50 for € 34,82 ea. 100 for € 33,97 ea. 500 for € 33,11 ea. More information In stock Sold per piece€ 37,40 Incl. VATAdd to cart
- Kitronik Compact All-In-One Robotics Board for BBC micro:bit Kitronik #5693 With the Kitronik Compact Robotics Board, the BBC micro:bit can be used to drive 4 motors (or 2 stepper motors) and 8 servos. Coupled with 17 other I/O expansion points, this means the BBC micro:bit can very easily become the core of a whole variety of robotics projects. 10 for € 21,33 ea. 25 for € 20,48 ea. 50 for € 19,65 ea. 100 for € 18,81 ea. 500 for € 17,96 ea. More information In stock Sold per piece€ 22,20 Incl. VATAdd to cart
- Romeo V2 - a Robot Control Board with Motor Driver (Compatible with Arduino) DFRobot #DFR0225 Romeo V2 - a Robot Control Board with Motor Driver (Compatible with Arduino), it is especially designed for robotics applications and extended devices. 10 for € 31,20 ea. 25 for € 30,42 ea. 50 for € 29,63 ea. 100 for € 28,85 ea. 500 for € 28,08 ea. More information In stock Sold per piece€ 32,00 Incl. VATAdd to cart
- Kitronik Klip Motor Driver for BBC micro:bit Kitronik #5655 The Klip Motor Driver for the BBC micro:bit does much more than just drive motors. It also breaks out pins 0, 1, 2, 3V and GDN (just like the main pads on the BBC micro:bit itself), and there’s a ZIP LED output as well, along with the battery voltage and another GND connection. 10 for € 15,55 ea. 25 for € 15,12 ea. 50 for € 14,69 ea. 100 for € 14,27 ea. 500 for € 13,83 ea. More information In stock Sold per piece€ 16,00 Incl. VATAdd to cart
- Mini Maestro 12-Channel USB Servo Controller (Assembled) Pololu #1352 The twelve-channel Mini Maestro raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control. Whether you want high-performance servo control (0.25μs resolution with built-in speed and acceleration control) or a general I/O.. 10 for € 59,94 ea. 25 for € 57,57 ea. 50 for € 55,20 ea. 100 for € 52,83 ea. 500 for € 50,46 ea. More information Delivered in 5 to 30 days Sold per piece€ 62,35 Incl. VATAdd to cart
- Mini Maestro 24-Channel USB Servo Controller (Assembled) Pololu #1356 The twenty-four-channel Mini Maestro raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control. Whether you want high-performance servo control (0.25μs resolution with built-in speed and acceleration control)... 10 for € 99,80 ea. 25 for € 94,96 ea. 50 for € 90,12 ea. 100 for € 85,27 ea. 500 for € 80,44 ea. More information Delivered in 5 to 30 days Sold per piece€ 104,65 Incl. VATAdd to cart
- VNH5019 Motor Driver Carrier Pololu #1451 This carrier board for ST’s VNH5019 motor driver IC operates from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak). It works with 2.5 to 5 V logic levels, supports ultrasonic (up to 20 kHz) PWM, and features current sense feedback (an analog voltage proportional to the motor current). 10 for € 50,78 ea. 25 for € 50,48 ea. 50 for € 50,17 ea. 100 for € 49,87 ea. 500 for € 49,56 ea. More information Out of stock Sold per piece€ 51,10 Incl. VATAdd to cart
- G2 High-Power Motor Driver 24v13 Pololu #2992 This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3″ × 0.8″ board supports a wide 6.5 V to 40 V voltage range and is efficient enough to deliver a continuous 13 A without a heat sink. 10 for € 61,25 ea. 25 for € 60,82 ea. 50 for € 60,37 ea. 100 for € 59,94 ea. 500 for € 59,50 ea. More information Out of stock Sold per piece€ 61,70 Incl. VATAdd to cart
- DRV8835 Dual Motor Driver Carrier Pololu #2135 This tiny breakout board for TI’s DRV8835 dual motor driver can deliver 1.2 A per channel continuously (1.5 A peak) to a pair of DC motors, and it supports two possible control interfaces for added flexibility of use: IN/IN and PHASE/ENABLE. With an operating voltage range from 0 V to 11 V... 10 for € 13,61 ea. 25 for € 12,80 ea. 50 for € 11,96 ea. 100 for € 11,13 ea. 500 for € 10,30 ea. More information Delivered in 5 to 30 days Sold per piece€ 14,45 Incl. VATAdd to cart
- DRV8880 Stepper Motor Driver Carrier Pololu #2971 This breakout board for TI’s DRV8880 microstepping bipolar stepper motor driver features adjustable current limiting, overcurrent and overtemperature protection, and six microstep resolutions (down to 1/16-step). In addition, the driver’s current limit can be dynamically reduced to save power. 10 for € 8,18 ea. 25 for € 8,06 ea. 50 for € 7,95 ea. 100 for € 7,85 ea. 500 for € 7,74 ea. More information Out of stock Sold per piece€ 8,30 Incl. VATAdd to cart
- Tic T825 USB Multi-Interface Stepper Motor Controller (Connectors Soldered) Pololu #3130 Tic T825 USB Multi-Interface Stepper Motor Controller (Connectors Soldered).The Tic T825 USB Multi-Interface Stepper Motor Controller makes basic control of a stepper motor easy, with quick configuration over USB using Pololu's free software. 10 for € 61,19 ea. 25 for € 59,69 ea. 50 for € 58,20 ea. 100 for € 56,70 ea. 500 for € 55,20 ea. More information Out of stock Sold per piece€ 62,70 Incl. VATAdd to cart
- Dual VNH5019 Motor Driver Shield for Arduino Pololu #2507 Get your Arduino moving! This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board. Its dual robust VNH5019 motor drivers operate from 5.5 to 24 V and can deliver a continuous 12 A (30 A peak) per motor... 10 for € 97,22 ea. 25 for € 95,94 ea. 50 for € 94,66 ea. 100 for € 93,39 ea. 500 for € 92,10 ea. More information Out of stock Sold per piece€ 98,50 Incl. VATAdd to cart
- Adafruit TB6612 1.2A DC/Stepper Motor Driver Breakout Board Adafruit #2448 Spin two DC motors, step one bi-polar or uni-polar stepper, or fire off two solenoids with 1.2A per channel using the TB6612. These are perhaps better known as "the drivers in our assembled Adafruit Motorshield or Motor HAT." More information Delivered in 10 to 30 days Sold per piece€ 5,80 Incl. VATAdd to cart
- Pololu G2 High-Power Motor Driver 18v17 Pololu #2991 This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3″ × 0.8″ board supports a wide 6.5 V to 30 V voltage range and is efficient enough to deliver a continuous 17 A without a heat sink. 10 for € 57,34 ea. 25 for € 55,35 ea. 50 for € 53,34 ea. 100 for € 51,35 ea. 500 for € 49,35 ea. More information Delivered in 5 to 30 days Sold per piece€ 59,35 Incl. VATAdd to cart
- Pololu G2 High-Power Motor Driver 18v25 Pololu #2994 This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3″ × 0.8″ board supports a wide 6.5 V to 30 V voltage range and is efficient enough to deliver a continuous 25 A without a heat sink. 10 for € 53,09 ea. 25 for € 52,52 ea. 50 for € 51,94 ea. 100 for € 51,37 ea. 500 for € 50,79 ea. More information Delivered in 5 to 30 days Sold per piece€ 53,70 Incl. VATAdd to cart
- Pololu Simple High-Power Motor Controller 18v25 Pololu #1381 The Pololu Simple High-Power Motor Controller makes basic control of brushed DC motors easy, with our free Simple Motor Control Center software enabling quick configuration over USB. The controller supports four interface modes: USB, TTL serial, analog voltage, and hobby radio control (RC). 10 for € 164,93 ea. 25 for € 160,98 ea. 50 for € 157,03 ea. 100 for € 153,09 ea. 500 for € 149,14 ea. More information Delivered in 5 to 30 days Sold per piece€ 168,90 Incl. VATAdd to cart
- Pololu G2 High-Power Motor Driver 24v21 Pololu #2995 This discrete MOSFET H-bridge motor driver enables bidirectional control of one high-power DC brushed motor. The small 1.3″ × 0.8″ board supports a wide 6.5 V to 40 V voltage range and is efficient enough to deliver a continuous 21 A without a heat sink. 10 for € 60,38 ea. 25 for € 59,92 ea. 50 for € 59,46 ea. 100 for € 59,- ea. 500 for € 58,54 ea. More information Delivered in 5 to 30 days Sold per piece€ 60,85 Incl. VATAdd to cart
- DRV8834 Low-Voltage Stepper Motor Driver Carrier Pololu #2134 This is a breakout board for TI’s DRV8834 microstepping bipolar stepper motor driver. It has a pinout and interface that are nearly identical to those of our A4988 carriers, so it can be used as a drop-in replacement for those boards in many applications. 10 for € 8,80 ea. 25 for € 8,54 ea. 50 for € 8,29 ea. 100 for € 8,03 ea. 500 for € 7,77 ea. More information Delivered in 5 to 30 days Sold per piece€ 9,10 Incl. VATAdd to cart
- Pololu Jrk 21v3 USB Motor Controller with Feedback (Fully Assembled) Pololu #1394 The jrk 21v3 motor controller is a highly configurable brushed DC motor controller that supports four interface modes: USB, logic-level serial, analog voltage, and hobby radio control (RC). 10 for € 78,93 ea. 25 for € 77,99 ea. 50 for € 77,06 ea. 100 for € 76,14 ea. 500 for € 75,20 ea. More information Delivered in 5 to 30 days Sold per piece€ 79,90 Incl. VATAdd to cart
- Adafruit DRV2605L Haptic Motor Controller Adafruit #2305 The DRV2605 from TI is a fancy little motor driver. Rather than controlling a stepper motor or DC motor, its designed specifically for controlling haptic motors - buzzers and vibration motors. More information Delivered in 10 to 30 days Sold per piece€ 11,60 Incl. VATAdd to cart
