Gravity Modules
All of these modules use the Gravity standard interface, plug and play, and there is a huge amount of code data for your reference. 119 results Sort by
- Gravity: Analog pH Sensor / Meter Pro Kit For Arduino DFRobot #SEN0169 This is a professional Arduino pH Sensor Meter Kit with industrial electrode. It has built-in simple, convenient , practical connection and long life (up to 1 year), which makes it very suitable for long term online monitoring.Delivered in 5 to 10 days€ 67,15 Incl. VAT
- Gravity: Analog ORP Sensor Meter For Arduino DFRobot #SEN0165 In the ever-increasing need and awareness for health and safety, water has become a focus point for proper disinfection treatment as aftereffects of industrialization can become a danger for contamination of water via direct contact.Delivered in 5 to 10 days€ 94,35 Incl. VAT
- Gravity: Analog Infrared CO2 Sensor For Arduino (0~5000 ppm) DFRobot #SEN0219 Introduction The concentration of carbon dioxide (0.03% usuallly) is related to daily life. Recently, there’s a study showing that the atmospheric CO2 content has reached 0.0385% (385 ppm) which is the highest value since 2.1 million years.Delivered in 5 to 10 days€ 60,80 Incl. VAT
- Gravity: Flexible 16x16 RGB LED Matrix DFRobot #DFR0463 Good news! There is a new member in to the Gravity family - The Flexible 16x16 RGB LED Matrix! This module is a square panel with a soldered XH2.54 3-pin interface with pin mappings that perfectly match the Arduino I/O expansion shield.Delivered in 5 to 10 days€ 76,85 Incl. VAT
- Gravity: 2x1.2A DC Motor Driver with Gravity Connector (TB6612FNG) DFRobot #DRI0044-A This DFRobot micro dual way DC motor driver with Gravity connector. It is design based on TB6612FNG motor driver chip. It inherits DFRobot L298N motor control logic, which only need four pins to drive 2 motors. The Gravity connector version expands four GPIO with standard Gravity connector.Delivered in 5 to 10 days€ 9,60 Incl. VAT
- Gravity: 2x2A Motor Shield for Arduino Twin DFRobot #DRI0017 Arduino product family is a great learning platform for electronics, programming and robotics. But most projects at some point require mobility. This motor arduino shield allows Arduino to drive two channel DC motors. It uses a L298P chip which deliveries output current up to 2A each channel.Delivered in 5 to 10 days€ 16,65 Incl. VAT
- Gravity: 4 Channel Relay Shield for Arduino DFRobot #DFR0144 This Relay Shield for Arduino acts like a switch. It is commonly used to control anything over 5V such as lamps, water pumps and garage doors. One of the most interesting projects for your boards is perhaps being able to control High power devices like Lamps, water pumps, garage doors and so on.Delivered in 5 to 10 days€ 15,75 Incl. VAT
- Gravity: 315MHZ RF Receiver Module DFRobot #TEL0112 The 315MHz RF receiver module is widely used in the field of vehicle Telecontrol, access control system, identification, etc. Compared with traditional wired communication, RF radio has advantage of higher flexibility and lower maintenance cost.Delivered in 5 to 10 days€ 7,90 Incl. VAT
- Gravity: 4Pin Sensor Adapter DFRobot #FIT0511 This is Gravity 4Pin sensor adapter which is special designed for 4Pin sensor. We have optimised its connection interface to make it compatible with gravity interface.And the press type terminal will provide you a good experience for the wire connection, press and connect.Delivered in 5 to 10 days€ 3,50 Incl. VAT
- Gravity: Arduino Shield for Raspberry Pi B+/2B/3B/3B+/4B DFRobot #DFR0327 What's the difference between Raspberry Pi and Arduino?We all know Raspberry Pi is a mini-computer running on Linux operating system; while Arduino is a microcontroller running on simple I/Os. Both of them focuses on very different areas.Delivered in 5 to 10 days€ 16,95 Incl. VAT
- Gravity: Bluno Beetle Shield DFRobot #DFR0356 The Bluno Beetle Shield expands the Beetle's single analog and digital I/O pins to the 3 pin "gravity" interface, giving more power and ground connections and making it easier to attach gravity interface modules.Delivered in 5 to 10 days€ 12,00 Incl. VAT
- Gravity: DC Fan Module DFRobot #DFR0332 Make an air aerial propeller vessel, a cooling system, or spinning machine with this small fan module. It comes with a propeller, a 15,000 rpm motor and cable.Add flavor to your own interesting projects with this module. This module is commonly used for STEM class.Delivered in 5 to 10 days€ 4,00 Incl. VAT
- Gravity: Beetle Shield DFRobot #DFR0285 The Beetle shield is designed to attach a Beetle (DFR0282) controller for easy connecting servos and sensors.Specifications Operating voltage: 3 - 5VCompatible with DFRobot BeetleDocuments Wiki( Beetle shield)Shipping List Beetle Shield x1Delivered in 5 to 10 days€ 3,35 Incl. VAT
- Gravity: Bright LED Module DFRobot #DFR0438 The Bright LED module is designed for some special application. It's using a very bright LED component as its light source.Compatible with DFRobot gravity 3-Pin interface, plug and play. What you need is just a digital signal, you can drive it directly.Delivered in 5 to 10 days€ 3,10 Incl. VAT
- Gravity: DC Micro Metal Gear Motor w/Driver - 75:1 DFRobot #DFR0399 An ordinary DC motor requires an H Bridge to work with a microcontroller such as an UNO.Delivered in 5 to 10 days€ 10,50 Incl. VAT
- Gravity: DC Micro Metal Gear Motor w/Driver For Arduino - 30:1 DFRobot #DFR0430 An ordinary DC motor requires an H Bridge to work with a microcontroller such as an arduino UNO.Delivered in 5 to 10 days€ 10,05 Incl. VAT
- Gravity: Digital Colorful Flashing LED Module DFRobot #DFR0474 Gravity Colorful LED is an LED twinkles with seven colors--the colors of rainbow.It is easy to light up the LED. Turn on the power, then the LED will light up without programming. The built-in controller controls the colors and duration randomly, which makes it shine like a colorful star.Delivered in 5 to 10 days€ 3,10 Incl. VAT
- Gravity: Digital LED String Lights (Colorful) For Arduino DFRobot #DFR0439 These LED string lights are composed of a series of LEDs that have a colorful glow. They can be used as decorations and for other interesting applications. Use them as outdoor string lights, string lights in your bedroom, on your patio or on a globe.Delivered in 5 to 10 days€ 9,65 Incl. VAT
- Gravity: Digital RGB LED Module DFRobot #DFR0605 Gravity: Digital RGB LED Module is a cascadable single RGB LED module compatible with RGB LED strip. The Gravity interface provides a more elegant manner for the connections between modules and most of mainstream controllers such as Arduino, micro:bit, Firebeetle Series, LattePanda, and Raspberry...Delivered in 5 to 10 days€ 2,70 Incl. VAT
- Gravity: Flexible 8x32 RGB LED Matrix DFRobot #DFR0462 Good news! There is a new member in to the Gravity family - The Flexible 8x32 RGB LED Matrix! This module is a square panel with a soldered XH2.54 3-pin interface with pin mappings that perfectly match the Arduino I/O expansion shield.Delivered in 5 to 10 days€ 76,85 Incl. VAT
- Gravity: Flexible 8x8 RGB LED Matrix DFRobot #DFR0461 Good news everyone! We have a new member to the Gravity family - The Flexible 8x8 RGB LED Matrix! This module is a square panel with a soldered XH2.54 3-pin interface with pin mappings that perfectly match the Arduino I/O expansion shield.Delivered in 5 to 10 days€ 42,90 Incl. VAT
- Gravity: I/O Expansion Shield for Pyboard DFRobot #DFR0577 Gravity: I/O Expansion Shield for pyboard is an multi functional expansion shield specially designed for pyboard v1.1. It is compatible with various sensors and electronic modules of Gravity series, plug and play, no soldering required.Delivered in 5 to 10 days€ 4,40 Incl. VAT
- Gravity: I2C 16x2 Arduino LCD with RGB Backlight Display DFRobot #DFR0464 Have you been fed up with Black/White LCD screen? Do you want to try a colorful one? DFRobot I2C 16x2 Arduino LCD with RGB Backlight Display module will bring you a new experience about screen. It comes with RGB full color backlight, which has 16 million kinds of color.Delivered in 5 to 10 days€ 10,75 Incl. VAT
- Gravity: I/O Expansion Shield for OpenMV Cam M7 DFRobot #DFR0578 Gravity: I/O Expansion Shield for OpenMV Cam M7 is an expansion shield specially designed for the OpenMV Cam M7. It is compatible with various sensors and electronic modules of Gravity series, plug and play, no soldering required.Delivered in 5 to 10 days€ 5,25 Incl. VAT
- Gravity: I2C 12-Bit DAC Module DFRobot #DFR0552 DFRobot Gravity 12-Bit I2C DAC is a small and easy-to-use 12-bit digital-to-analog converter with EEPROM. It can accurately convert the digital value to corresponding analog voltage signal, which is useful in may creative projects and automatic control systems.Delivered in 5 to 10 days€ 5,40 Incl. VAT
- Gravity: I2C 16x2 Arduino LCD with RGB Font Display (Black) DFRobot #DFR0554 Accustomed to the same LCD screen, do you want to have a different experience? DFRobot LCD1602 will bring you a new visual feeling, It is not the same as the previous LCD monochrome screen, supports RGB full-color font, can provide 16 million kinds of color combinations.Delivered in 5 to 10 days€ 11,20 Incl. VAT
- Gravity: I2C ADS1115 16-Bit ADC Module (Arduino & Raspberry Pi Compatible) DFRobot #DFR0553 DFRobot I2C ADS1115 16-bit ADC module can accurately collect and convert analog signals. Through this ADC module, Raspberry Pi can easily use a wide range of Gravity series analog sensors to measure various signals, and perceive this world.Delivered in 5 to 10 days€ 14,90 Incl. VAT
- Gravity: I2C EEPROM Data Storage Module DFRobot #DFR0117 Arduino has a small amount of data storage space, The Arduino UNO has 32k.It doesn't have enough space if you want to store a lot of data. Therefore, we need to add an EEPROM Data Storage Module to increase its storage space.Delivered in 5 to 10 days€ 6,00 Incl. VAT
- Gravity: I2C LCD1602 Arduino LCD Display Module (Blue) DFRobot #DFR0555 Gravity: I2C LCD1602 Arduino LCD Display Module (Blue).Referring to the LCD16020, I believe that everyone is not unfamiliar with the square shape, green color, a row of 2.54 pin header....Delivered in 5 to 10 days€ 10,50 Incl. VAT
- Gravity: I2C OLED-128x64 Display DFRobot #DFR0486 An OLED (organic light-emitting diode) has many advantages over traditional LCD displays, including a faster response speed, thinner profile, lower power consumption and excellent shock resistance. An OLED can be widely used in mobile devices for display applications.Delivered in 5 to 10 days€ 14,50 Incl. VAT
- Gravity: I2C to Dual UART Module DFRobot #DFR0627 This I2C to Dual UART module offers data transmission rate up to 1Mbps, and each sub UART has independent 256-byte FIFO hardware buffer for transmitting and receiving. The baud rate, word length, and check format of every sub UART can be set independently.Delivered in 5 to 10 days€ 8,65 Incl. VAT
- Gravity: I2C SD2405 RTC Module DFRobot #DFR0469 We're glad to introduce a new member in Gravity family: Gravity I2C SD2405 RTC module.This is an extremely accurate I2C real-time clock (RTC) with crystal compensation, inner chargeable battery. The SD2405AL is available in industrial temperature ranges.The SD2405AL is dual power supply system.Delivered in 5 to 10 days€ 8,70 Incl. VAT
- Gravity: IO Expansion Shield for LattePanda V1 DFRobot #DFR0491 This Gravity I/O expansion shield, which is made for LattePanda V1(not compatible with LattePanda Alpha & Delta), breakouts all GPIO pins to make it compatible with standard Arduino device and no interruption with other ports on LattePanda.Delivered in 5 to 10 days€ 9,65 Incl. VAT
- Gravity: IO Expansion & Motor Driver Shield DFRobot #DFR0502 Gravity IO Expansion Shield with Motor Driver is a new product designed for Arduino Boards. It combines IO Expansion Shield and DC Motor Driver Shield, equipped with Gravity sensor interface and TB6612FNG dual motor driver.Delivered in 5 to 10 days€ 16,25 Incl. VAT
- Gravity: Joystick Module V2 DFRobot #DFR0061 Lots of robot projects need joystick. This updated joystick module V2 provides an affordable solution. Simply connect to two analog inputs, the robot is at your commands with X,Y control. It also has a switch that is connected to a digital pin.Delivered in 5 to 10 days€ 6,25 Incl. VAT
- Gravity: Shiftout Module DFRobot #DFR0072 At sometime or another you may run out of pins on your Arduino board and need to extend it with shift registers. With this shift out module which is based on 74HC595. The datasheet refers to the 74HC595 as an "8-bit serial-in, serial or parallel-out shift register with output latches; 3-state.Delivered in 5 to 10 days€ 4,10 Incl. VAT
- Gravity: Nano I/O Shield for Arduino Nano DFRobot #DFR0012 The Arduino Nano I/O Sensor Shield acts as an expansion board for the Arduino Nano and DFRduino Nano microcontrollers. There are several different options for power input. The form factor of the Nano I/O Shield board is the same as the Arduino UNO/arduino Leonardo.Delivered in 5 to 10 days€ 9,25 Incl. VAT
The 3 most popular Gravity Modules
DFRobot Gravity Series is a high quality open-source, modular, plug and play electronics toolkit for everyone to create anything easily. With powerful expansion shields, various professional functional modules with standard interfaces and clear documentations, Gravity Series allows users of any skill level to easily connect and mix to realize ideas or develop projects.
